Question about Acer Aspire AX1800U9002 (PTSBW02001) PC Desktop
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ACER AL1716S 17"TFT Monitor
Hi, Mine was slow all so. I taken the side panel off and blow it out with a air hose. there was so much dust in it.It is running slow as well. It is very quite know and seems to be alot faster as well. your problem you are talking about i'am sure it was like my problem. needs a good cleaning in side.
Posted on May 12, 2009
If you have auto update on this maybe the result of an incomplete update or a BIOS problem. In fact there could be quite a number of causes here, but we'll try to get to them. This is going to be trial and error to run the problem down.
Try this fix….all you need is a flash drive, the BIOS files from Acer support Downloads and 10 minutes of your time.
Acer One Black Screen of Death Repair…..
In most cases the black screen of death for the Acer One is due to a bad update or corrupt BIOS. In 90% of the cases, this black screen can be cured by flashing the BIOS of the Acer One.
The first thing you will need besides the netbook is a flash drive, preferably a 1 GB version so you have plenty of room. Make sure it a flash drive and not a reader or mp3 player.
Go to the Acer support site and go to service and support and go to the drivers download section. Navigate to the exact model of your Acer One, it will be labeled on the bottom of the case. It will be something like AOA150 etc….
Once you choose the model, choose BIOS and download the latest that is listed. Save it to a folder on the desktop so you can find it later. Now find the file and unzip it to that folder. When the files are unzipped they will all be listed.
Now go to “My Computer” in the control panel and find the flash drive listed. Right click on the flash drive and scroll down to “Format”. Choose “FAT” as the format….not fat32 and not ntfs. Run the format, hit apply and accept and the flash drive will be formatted to the “FAT” file system, this will allow it to boot your computer and flash the new BIOS.
Now go to the folder that has the unzipped BIOS files. Now find the folder named…. “Dos_Flash…open this folder and you will find the file that has the version number of the BIOS files needed to flash the BIOS. Right click on this file and scroll down to “Rename”, choose rename. You have to change this file name to the following…..zg5ia32.fd
Now, copy this renamed file to the flash drive that you previously formatted and also copy the file, Flashit.exe to the drive as well. This file is in the same folder as the one you previously renamed.
Now make sure the netbook is off and is fully charged. Now connect the flash drive to any of the available USB slots. Now, press the “Fn” key and hold it as well as the “Escape” key and hold it. Hold these two down together and do not let go of them. While you are holding these two keys down, press the power button and hold it down until you see the green power indicator light comes on and starts blinking…once this happens, let go of the other buttons and observe the indicator light on the flash drive. It should also start blinking indicating files being read on the flash drive. Now, just wait up to 1-10 minutes for the BIOS to be written and flashed. If it all goes well…..the system should boot up without incident and without any data loss.
Try this fix first and then we will move on to the next.
Posted on Aug 01, 2010
Tips for a great answer:
Sep 07, 2012 | LG P970 Optimus Titanium Black Android 2.2...
May 11, 2012 | Refrigerators
Feb 11, 2011 | Kenmore 60172 Electric Commercial Dryer
Dec 14, 2010 | Proform 590T Treadmill
Jun 10, 2009 | Dryers
Oct 27, 2007 | Refrigerators
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: