Question about Computers & Internet

1 Answer

My PC using ubuntu 8.04 and i need the Ncomputing X300 driver for ubuntu 8.04. I'd googling everywhere such here http://www.ncomputing.com/download/x300-lts.zip but the file doesnt exist... Please help me... thank you so much

Posted by on

  • train rabbit May 20, 2011

    thank you for ur attention...
    well....i'd consired about that too before but if i'm not wrong..that X300 ncomputing only work in ubuntu version 8.04 or lower than that. Now Ncomputing had realease a new version of their product such as X350 and X550 also the L version... so the support to x300 product isn't avaiable in their web site... that's a problem for who has buy the x300 product.
    I'm still looking the driver and hope some one could tell me if found the solution.
    NB : I'm also testing the X550 in ubuntu 8.04 and its works cos i can find the driver (x550 also work perfect only with ubuntu 8.04)

  • train rabbit May 23, 2011

    It's okay...
    i'm hope we can be friend... if you dont mind this is my email address...
    if there's any thing i can help....let me know...
    c ya

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 670 Answers

Why dont you just upgrade to the new version of ubuntu i believe it has alot of those fixes in it

Posted on May 19, 2011

  • 1 more comment 
  • Joshua Staniels
    Joshua Staniels May 20, 2011

    ahh ok well. i know from personal problems i had issues finding a wireless driver when i had an older version of ubuntu i spent days hours looking. finally i found a usb wireless driver that said is compatable but still no luck. linux is tricky. you can always look @ programming something to get around it. but i am not 100% sure that would even work.

  • train rabbit May 21, 2011

    Ok...anyway.. thank you for ur reply. i'm really apriciate what you do.

  • Joshua Staniels
    Joshua Staniels May 21, 2011

    no problem sorry i couldn't help you

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have xp os,i want to install x300 ncomputing dievice graphics driver to install.


put the x300 disc in the cd drive then go to my computer then device manager update the x300 drivers from the x300 cd

Oct 26, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Ncomputing suport corel and photoshop wok in higher verson


Not sure what you mean by a 'higher version'. The NComputing solution will work with any program that is 'Multi-User' aware. Thus users do successfully use the NC platform with applications such as Photoshop. Where you might run into challenges is with the available resources on the host. Given enough hardware resources, i.e. Dual or Quad core PC, 4GB of RAM, etc. the experience should be sufficient. If you need 32b color depth then you'll be out of luck with the X300, you will need to use their (NComputing's) U170 product to meet that need.

Jul 07, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Recently i have a problem with NCX 2000-xp consol i have 4 desktop one one system one the main pc is working but other three screen show internal error what can i do to solve this problem


Where is the 'internal error' showing up, in the NComputing console, or on the Station screens? My recommendation is to uninstall the vSpace software, reboot, run thier cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210.

Jun 30, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

I'm using NComputing X300 kit to connect sets of PC's running Windows XP SP2. I install windows 7 on the PC's and the NConputing is not supported any more. Can you help me to get the X300...


Hi enoonoo
Even though the product claims to be compatible with Windows and Linux, it has 1/ no drivers for any Linux system and 2/ does not work with Vista / Windows 7 .
It is useless , it will just don't work anymore .
You can always create a network , sharing all machines via a gateway . It also works between different OS versions like sharing a W7 unit with an XP one .
Best regards ,
fanaudi .

May 19, 2011 | Computers & Internet

2 Answers

I need Vista drivers for Extenda x300


Hi,

According to this web page:
http://www.ncomputing.com/node/1629

You can download the drivers for the Extenda x300 here:

http://www.ncomputing.com/download/x300.zip

Please let me know if this helps,

Kind regards,

Chris

Mar 12, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Is NComputing X300 3 User Expansion Kit can install and use in Windows 7. NComputing X300 3 User Expansion Kit software supports or not?


NComputing software updates are only available to registered NComputing customers. To install the software you must have a valid NComputing software license and you must read and agree to the terms in the End User License Agreement and Terms of Use.


Here is the LINK.



If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 27, 2010 | NComputing X300 3 User Expansion Kit...

2 Answers

I wanna the cd of x300 Xtenda multibox because I need the driver and cd for the installation


I would recommend NOT using the CD. Uninstall any current version of vSpace. Reboot. Makesure you have no missing or conflicting device drivers inside of devicemanager. Then run the NComputing cleanup utility located here:www.nc-eng.com/tools/ncuninstall.exe. Download current version for XP(v4.03.104.1) from here: www.ncomputing.com/download/x300. Unpack the.ZIP file and install. Reboot and register.Do NOT, I repeat, do NOTinstall from the provided CD and upgrade. Simply install straightfrom the download file I provided in the link. Lastly make SURE you REGISTER the CARD and the XD1 boxes.

Sep 29, 2010 | NComputing X300 3 User Expansion Kit...

1 Answer

Drivers


I can help you with your NComputing X300 drivers problem.

Drivers for the X300 are available from Ncomputing to registered Ncomputing customers only. They are not avaliable for download unless you have a valid NComputing software license. At Fixya.com, we cannot help you get around software license issues.

I hope that helps.

Aug 30, 2010 | NComputing X300 3 User Expansion Kit...

3 Answers

Problem install X300 Xtenda Multi Box. Windows XP code 10 for X300 Graphic Controller.


look up the driver for it. you normally need to download drivers for things before you install them

Jun 19, 2010 | NComputing X300 3 User Expansion Kit...

1 Answer

I have a pci card for multiuser .


Here is a link to the software for the X300:

http://www.ncomputing.com/download/x300.zip

Just unzip it, and run the EXE file inside the directory. There is a PDF readme file for reference.

Mar 18, 2009 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...