Question about Samsung HP-R4252 42 in. Plasma HDTV

1 Answer

SAMSUNG HLS4266WX HEY GUYS HOW ARE YOU? I HAVE A SAMSUNG HLS4366WX THAT CUTS OFF EVERY 30 MINUTES CAN YOU GIVE AN IDEA OF WHAT IT IS?

Posted by on

  • 2 more comments 
  • fairfam Aug 18, 2008

    check fan no.1 - problem

    the t.v shuts off after 10 minutes

  • ESTEBAN MERINO
    ESTEBAN MERINO Aug 24, 2008

    HEY THANKS FOR YOUR HELP,NOW I HAVE A QUESTION FOR YOU IS THERE ANY WAY THAT I CAN TRAINING IN THIS TYPE OF TELEVISION, I AM NOT UPDATED WITH THIS TYPE OF TELEVISION CAN YOU OR ANYONE THAT YOU KNOW HELP ME WITH THIS.

    THANKS

  • ESTEBAN MERINO
    ESTEBAN MERINO Oct 28, 2008

    I need help with this tv, please any help will be apprecited, it comes on no function on the front panel or the remote control,no audio no video, it will lit up for 2 or 3 second and after 3 minutes goes off

    samsung model hls4674s dlp

  • ESTEBAN MERINO
    ESTEBAN MERINO Oct 29, 2008

    thanks dan, no there is not any blinking light when shuts of it goes to standby with the steady red light.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

THe most common cause of this is overheating. These sets have fans that should keep them cool enough. Check to be sure that the fans are working and that the vent holes are not blocked. These sets will shutdown when excessive heat is detected. If that is not the issue here, let us know and we'll start looking elsewhere.

Dan

Posted on Aug 14, 2008

  • ABRsvcs Oct 29, 2008

    Since this set is a DLP, when it shuts down there should be a code with the LEDs on the front. There should be a lamp, temp and power light. Are any blinking or on after the shutdown?



    Dan

  • ABRsvcs Oct 29, 2008

    Since this set is a DLP, when it shuts down there should be a code with the LEDs on the front. There should be a lamp, temp and power light. Are any blinking or on after the shutdown?



    Dan

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung HP-S4253 screen flickering. When turned on,the image is blurry and keeps flashing.


Flickering can be adjusted to an extent. If can't it will be due to a defective power regulator board. Might have to be replaced. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 12, 2017 | Samsung Televison & Video

1 Answer

My tv cuts on but flashes red light 5 times and shuts off


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 10, 2017 | Televison & Video

1 Answer

Samsung led tv backlight


Since I have no idea of your skill level or what tools and equipment you have I would say leave it to an expert. The cost will be about $300.00+ (USD)

Jan 09, 2017 | Samsung Televison & Video

2 Answers

Vertical lines on my plasma tv


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | Samsung Televison & Video

1 Answer

I was using my Samsung LCD 40" - LE40M86BD [R] when it just switched off and wouldn't come back on. What could it be? Thanks guys


Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. . If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 07, 2017 | Samsung Televison & Video

1 Answer

I have a HL67A750 Samsung no picture no sound blue light luminated on front 3 LEDs flashing


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 05, 2017 | Samsung Televison & Video

1 Answer

Can it be repaired and can I do it myself?


No, It's dangerous to repair a TV yourself, it contains hazardous electric currents. Most of such Electronic or Electric Gadgets have Hazard Warning on their Backside "CAUTION: NO USER SERVICEABLE PARTS INSIDE, RISK OF ELECTRIC SHOCK! DO NOT OPEN!!"

So, please consult Authorized Service Professional to repair your TV.

Apr 26, 2014 | Televison & Video

Not finding what you are looking for?
Samsung HP-R4252 42 in. Plasma HDTV Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...