Question about Office Equipment & Supplies
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The exact explanation per xerox is " The Printhead is stuck in the tilted position, and is not able to tile forward to the print position, due to problems.
This is usually caused by broken printhead restraints, of the machine got shut off in the middle of warming up, and the printhead is stuck to the cap wipe assembly.
Regardless the machines covers will have to be taken off to go any further.
Posted on Aug 21, 2009
Toner, developer, drums and chips are all available for the Xerox 6280. Some of the aftermarket (non OEM) toner for this printer is excellent, and some quite poor.
As with all toner cartridge remanufacture (and that is what it should be - not just topping up, or refilling), cleaning the cartridge (of remaining unused toner), emptying the waste toner, and cleaning the components is vital to a succesful cartridge.
The toner powder is a very small particle size, and is so small that it will pass right through the filter of ordinary vaccums (specialist toner vacs have a special filter that IS fine enough to trap toner)
If you do this at home, without the right extraction and filtration equipment, you'll have toner all over.
The drum is very vulnerable to damage through careless handling of the cartridge (as there is no built-in drum shutter), and (for the same reason) is also prone to light damage if exposed to strong light for more than a short time.
Don't leave a cartridge (even with a 'clip on' drum cover fitted), in bright light. The gap between the two halves of the cartridge is enough to allow light to act on the drum and damage it. Cover the cartridge completely, of put it in a light proof bag if it is to be left out of the printer for a while.
Posted on Nov 20, 2009
One of two things. The fuser bearings get noisy in those.
Or there are several small hard plastic rollers on steel shafts or even mounted on springs they they can get very noisy.
Posted on Feb 24, 2010
Tips for a great answer:
Feb 26, 2013 | Xerox Phaser 6280 Clr Laser Printer 26Ppm...
Feb 08, 2013 | Xerox Phaser 6180N Laser Printer
Nov 10, 2012 | Xerox Phaser 6280 Clr Laser Printer 26Ppm...
Sep 30, 2011 | Xerox Phaser 6280 Clr Laser Printer 26Ppm...
Feb 24, 2010 | Xerox Phaser 4500/YDX Printer
Nov 28, 2009 | 1997 Ford Expedition
Aug 12, 2009 | Xerox Phaser 8200 Laser Printer
Jun 16, 2009 | Laser Phaser 6280v_n 25ppm 256mb - XEROX &...
104 people viewed this question
Usually answered in minutes!