Question about Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Bosch classixx 6 1200 washer

As this machine only has one feed, is it possible to fit to hot water system to save on power heating the water.
many thanks Tony.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Problem will be ... machine will use your hot water during the rinse cycles! So, No.

Posted on Jan 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my Bosch Washing Machine (Classixx 1400) no longer heat the water? I have already tried replacing the washer heating element.


This video will show you how to replace the Bosch washing machine heating element and thermostat with step by step guide on the process

Jun 10, 2011 | Bosch Classixx WVF 240S Front Load Washer...

1 Answer

Just bought a new washer (refurbished, therefore doesn't come with a handbook). our old washer had both the cold and hot pipe connected, our new one (a bosch 1400 classixx) only has a white valve. do we...


Hi from retired Englishman in SW France,

You just need to collect the cold pipe- the washer does the heating itself for hot washes. It uses the water cold for rinses ;-0)
And for a manual-

you will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!

Good luck,
John C
.

Feb 24, 2011 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Bosch classixx washing machine is not heating the water


Have you interchanged the hot and the cold water valve? Check your installation. If the installation is correct, the hot water valve might be the problem. You probably need to replace it with a new one.

http://www.washingmachineadvisor.com

Nov 09, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Bosch clasixx6 noy heating water on any setting


need to replace wash heater remove front panel heater held in with one 10 mm nut easy to fit.

Jun 01, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Fabric conditioner does not get taken


It is likely the softener feed funnel may be blocked.Remove detergent drawer and push forward middle softener console. It should lift revealing a narrow funnel. Rinse funnel thoroughly in hot water.

Apr 24, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Softener won't empty in Bosch Classixx 1000


take out the soap drawer clean in hot water inside the machine where you took the soap drawer out at the top look for the hole where the water runs out it may be blocked with mildew dettox mildew spray is very good at breaking all that down spray in leave for a while put soap draw back in and do a wash without clothing as spray contains bleach

Mar 30, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

My bosch classixx 1200, my washing machine leaks when not in use, to solve the problem i have had to have a valve fitted to the pipe that feeds water into the machine and keep switching the valve down to...


Remove top and check that they are your fill vaulves. Your hoses should be connected to them if so.If they are leaking on inside of machine when off then they need replacing.

Mar 15, 2010 | Bosch Classixx WFC 2465 Front Load Washer

1 Answer

Just got the dish washer never had one before got no instructions to connect so is it connected to hot or cold water thank you


Can be connected to both but connecting it to the hot water would make for a shorter and more economical cycle - no need to wait for the water inside the washer to be heated.

Mar 06, 2010 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Cant connect the water hoses the machine


Cold fill only , designed to run efficiently on lower temperatures and with cold water powders

Blank off the hot supply line at the back of your washer before you fit it back to the wall.

Only two pipes on the machine Cold In, Waste out

Apr 23, 2009 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Cold water or cold & hot water connection?


If there is only 1 water connection on the back of the machine then it's a cold water supply only and the machine will be fitted with a heater element to heat the water. If it has 2 water connections then you need the hot supply and should ask someone to fit the correct isolation valve on the capped pipe so you can fit the required hose. Most modern machines are cold water only.

Apr 11, 2009 | Bosch Washing Machines

Not finding what you are looking for?
Bosch Classixx WFL 2066 Front Load Washer Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...