Question about Kenmore Dishwashers

1 Answer

Dishes come out dirty like trap needs tobe cleaned kenmore 565

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

Hi



If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next thing to check for is the water pressure and fill valve. Check if the water is filling in and the spray arms are throwing the water with enough pressure. Try and listen to the sound if you hear a proper spraying action sound.

If it seems as a low water pressure then check the fill valve. Now, check if dishwasher is draining the water or not. While the dishwasher is working check whether the dishwasher is draining and there is not much left out water after the cycle is complete. Try cleaning the spray arm with a soft brush. The water temperature plays a major role in cleaning of dishes. The temp should be between 125 and 150 F for dishwasher to clean the dishes.


Hope this helps... Please post back if you need more information.


Daniel


Posted on May 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore HE2 dryer that was working just fine. My husband stopped it in the middle of it's cycle to check on the clothes. He cleaned the lint trap and put back. When he closed the door and tried to...


you can unplug it for about 30 minutes, but I would venture to guess that the sensor which is located below the lint trap(if you look down the trap you will see to screws) is dirty and need to be cleaned, clean gently as not to break the sensor. Good Luck Tim

Feb 25, 2011 | Kenmore 85871 Electric Dryer

1 Answer

When washer is discharging its water it comes out the air vent, the inside of washer is dirty. What can I do to fix the problem. Thank you ...


You need to take back of dish washer off unhook the drain hose and clean that hose good with soap and water or companies recommandations for cleaning hose and as for inside being dirty use a disinfectant clean the inside out and then after hoses are put back on and back is back on run dishwasher with no dishes and no soap for one cicle to rinse and test unit.

Oct 09, 2010 | Kenmore Dishwashers

2 Answers

Dishes seem to have a dirty water film on them


is this connected to another appliance or is it under a sink connection?

Oct 11, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Even clean dishes come out dirty


perhaps your soap is "stale". Rinse agent also helps.

Jul 23, 2009 | GE GLD4600NCS Built-in Dishwasher

1 Answer

Dishes not clean enough. as if rinsing in dirty


If your dishwasher drains it's water to a garbage disposal, give the disposal a spin while the dishwasher is pumping out. Check around the bottom of the dishwasher to make sure something is not clogging the drain.

May 01, 2009 | Kenmore Dishwashers

1 Answer

Kenmore Elite dishwasher 655.16463300 not cleaning dishes


The inlet screen is at the bottom of the unit. Clean it out and re-try.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Apr 08, 2009 | Kenmore 24 in. 16463 Built-in Dishwasher

1 Answer

Dishwasher that leaves dishes dirty


Your drain could be blocked, remove the drain from the trap below the sink and try running the unit on drain, into a bucket. Also check the connection at the trap to ensure it is free from blockage

Mar 19, 2009 | Dishwashers

1 Answer

Where is the filter on a Kenmore Quiet Guard 2 dishwasher?


not a dumb question,
is the bottom dishes coming out clean? there is a chopper that breaks and will trap food and not clean the top rack.it is not easy to replace.but not impossible.

Oct 23, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...