Hi my xbox was not opening which i found out was a small rubber band which i have fixed but now it is not loading at all there is no normal loading noise.
Re: Hi my xbox was not opening which i found out was a...
If you opened it up yourself, there is a chance that you accidentally messed something up internally, you might have to go back in and make sure everything is in order.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
when you get the xbox tray to open eject then tap it you will see a rubber band take this out with tweezers and give a good clean with alcohol wipe then clean the wheels where rubber band sits put back on the rubber band hey presto 1 fixed draw
If your Xbox 360 DVD drive won’t eject it can be a very simple fix.
The
Samsung drive is almost always a very simple fix, if you have another
drive, it may be more difficult.
To identify your drive, follow
this guide:
• Remove the faceplate by firmly grasping the
opening for the USB ports and pulling. • Underneath the DVD tray
there should be a small hole. • Look at the wires in the hole to
identify which drive type you have.
Red and Black Wires = Samsung
Drive Yellow Wires = LiteOn Drive White Wires = BenQ Drive No
Wires = Hitachi Drive
SAMSUNG:
It is very common for a
Samsung drive to not eject. It’s a very simple fix for this!
1.
Power on your Xbox 360 2. Press the eject button 3. When
the Xbox 360 “tries” to eject, just simply push in on the tray cover.
That
should make it eject!
If it does not, please follow the guide
for the other drives below:
This requires you to disassemble your
Xbox 360. IF you don’t know how, look it up on google, there are plenty
of guides.
Then follow these steps:
1. Remove your
Xbox 360 DVD drive from the Xbox 360 2. Turn over and remove the
four screws securing the drive (6 screws if it’s a Hitachi) 3.
Remove the top cover of the DVD drive. 4. Put the drive back in
the Xbox 360, connect the wires, and power on your Xbox 360. 5.
Once the 360 powers on, eject the drive. Most of the time it should
eject normally. If it doesn’t you may have to force it. 6. Unplug
the Xbox 360. If you turn it off with the power button the tray will
close first, we need it open. 7. Near the front of the drive, you
should now be able to see and access a small rubber band that was hidden
by the tray. 8. Remove the band, lubricate and replace. 9.
Replace the top cover and hook up and test. 10. If that doesn’t
work, you may need a new rubber band. If you can get one of the right
size, replace and test.
If your Xbox 360 DVD drive won’t eject it can be a very simple fix.
The Samsung drive is almost always a very simple fix, if you have another drive, it may be more difficult.
To identify your drive, follow this guide:
• Remove the faceplate by firmly grasping the opening for the USB ports and pulling. • Underneath the DVD tray there should be a small hole. • Look at the wires in the hole to identify which drive type you have.
Red and Black Wires = Samsung Drive Yellow Wires = LiteOn Drive White Wires = BenQ Drive No Wires = Hitachi Drive
SAMSUNG:
It is very common for a Samsung drive to not eject. It’s a very simple fix for this!
1. Power on your Xbox 360 2. Press the eject button 3. When the Xbox 360 “tries” to eject, just simply push in on the tray cover.
That should make it eject!
If it does not, please follow the guide for the other drives below:
This requires you to disassemble your Xbox 360. IF you don’t know how, look it up on google, there are plenty of guides.
Then follow these steps:
1. Remove your Xbox 360 DVD drive from the Xbox 360 2. Turn over and remove the four screws securing the drive (6 screws if it’s a Hitachi) 3. Remove the top cover of the DVD drive. 4. Put the drive back in the Xbox 360, connect the wires, and power on your Xbox 360. 5. Once the 360 powers on, eject the drive. Most of the time it should eject normally. If it doesn’t you may have to force it. 6. Unplug the Xbox 360. If you turn it off with the power button the tray will close first, we need it open. 7. Near the front of the drive, you should now be able to see and access a small rubber band that was hidden by the tray. 8. Remove the band, lubricate and replace. 9. Replace the top cover and hook up and test. 10. If that doesn’t work, you may need a new rubber band. If you can get one of the right size, replace and test.
Do not attempt this fix ur self if your not familar with the dvd drive parts . The problem is the band on the dvd drive motor under the disc tray is slipping . To fix this use a rubber band. Step 1 Remove your dvd drive unscrew all 4 screws , 2 remove green board carefully . 3 unscrew any screw under the disc tray and remove this disc tray , step 4 get a rubber band a small rubber band and replace the band thats slipping put your dvd drive back together and ur good to go . If you do NOT want to do this your self you can go to Solomodsdotcom and they will fix the dvd drive for you . Google search to to replace rubber band on 360 dvd drive . You tube has videos on how to but i wouldnt recommend doing it your self if your not familiar with the parts .
your rubber band that runs the gear is bad you need to replace it you can do it or we can fix it for you email me with any questions at [email protected]
I bought one of these units from a flea market for $5.00. It said the tray wouldn't open. I picked it up, and noticed the same thing you did. Humming motor, but the tray stayed put.
I opened it up to check things out, and all that was wrong was a (very) stretched out belt on the pulley that opened the tray. I replaced it with a rubber band and it has worked ever since. Once the rubber band wears out I'll replace it with a proper belt, but for now, it was a 2 minute fix that's lasted around 11 months so far. I really, really like this player, and plan to keep it working for a long time!
Hi there is a plastic band around the rubber seal to take it off you would need a small screwdriver and prise it open gently than lift off the rubber and replace the door switch to put back the band just push clip the two ends together when it is around the rim
Please specify what you did with the small rubber band.
×