Question about Hoover Vacuums

1 Answer

How does the belt attach on a hoover elite? - Hoover Vacuums

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hoover Master
  • 3,740 Answers

Hi and welcome to FixYa, I am Kelly,

There is much more info in the video below than you need but it does eventually show you how to install the belt. At 2:09 into the video you will see how to open the bottom of the unit to gain access to the belt. The belt will be on the right side with the unit inverted. You have to remove the screws on the cover from the motor to the agitator bar. The agitator bar can be pushed straight down (base upright) or pulled straight out of the bottom of the chassis (unit inverted). Then slide the new belt in place and reinstall the beater bar.

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Upright Hoover Elite. Can't get belt back on right.


The belt loops over the motor shaft and the brush roller. Verify that the arrows on the end caps of the brush roller are facing DOWN or you will be doing the job over again. Start with the motor shaft and stretch the belt to allow the brush roller to seat. A new belt can require a strong pull on the brush roller to get it seated.

Nov 16, 2016 | Hoover Vacuums

1 Answer

What is the belt part no. for a hoover elite rewind?? model no. UH71009RM


If you look up the Hoover page for the UH71009 (the non-remanufactured Elite Rewind), there are 3 different belt model numbers listed. One part number is simply for a 2 pack of the belts. See http://hoover.com/products/details/uh71009/elite-rewind-bagless-upright/ . Click on the Parts & Accessories tab.

I believe the belt part number is 38528058 , http://hoover.com/parts/details/38528058/sra-r-b-562932001-belt/ .

I hope this helps.

Cindy Wells

Oct 04, 2015 | Hoover Vacuums

1 Answer

Seeking Manual and Help for Hoover U5075-930 vacuum


The manual will be hard to find but I own several of these Elite syle Hoovers. The plastic top cover that houses the headlight lens, attachment door, etc pops off by gently releasing the plastic tabs that hold it on. They are located on the underside of the machine. Be gentle as those plastic tabs can be easily broken.

Aug 27, 2013 | Hoover U5227-930 Elite Upright Vacuum

1 Answer

This was very helpful but I still cant find the motor spindle to attach the belt to. Do I have to take the entire plastic base cover off?


Not sure who helped you, was it me?
Go to this URL:
http://www.hoover.com/pdfs/manuals/U5167900.pdf
In figures 3-21 to 3-23 you will see how the new belt is attached and they point out where the motor spindle is. If you have problems, please contact me.
If you find this information to be of help, I would appreciate a rating in the FixYa system. Thank you. Paul

Sep 22, 2010 | Hoover Elite U5061-900 Bagged Upright...

1 Answer

How do I change the belt for the Hoover Elite


Hi,
Follow this link to a website that will show how to change belt (it aslo has illustrations). Click first link listed on page.

http://www.info-vacuum-cleaner.com/hoover-vacuum-cleaners.php

Hope this helps.

Jan 26, 2010 | Hoover Elite Rewind Bagless Upright...

1 Answer

I need to know how to install the belt on a hoover elite upright, #38528027


There are two snaps underneath to release the bottom plate. Next remove the top cover by gently prying off the base with a flat screwdriver. this will expose the belt. Install the new belt on the roller nd then push through the hole to attach to the motor shaft. reinstall the cover and bottom plate.

Jan 14, 2010 | Hoover Elite U5061-900 Bagged Upright...

1 Answer

Hoover elite how do i put the belt on


Here is the belt you need: Hoover U5061900 Belt
Simply turn the machine over and you will see (4) screws, remove them and you will be able to access of the belt.

Dec 14, 2009 | Hoover Elite U5061-900 Bagged Upright...

1 Answer

My HooverDeluxe Elite Rewind became extra loud


If the belt is really worn it can cause that. I wold try changing the belt if you haven't recently. Here are the belts you need:

Hoover Elite Rewind Belts


Nov 14, 2009 | Hoover U6630-900 WindTunnel Bagless...

1 Answer

How do I change the belt on my Hoover Elite Dual Purpose Vacuum cleaner? The belt part # is 38528-027. Where is the motor pulley?


The hoover belt number you listed (38528027) has been changed by Hoover to 38528040. Below I have listed a link to the manual that has instructions and a link to the belt you need. Hope this helps!

Hoover Elite Manual

Hoover Elite Replacement Belts

Nov 02, 2009 | Hoover Elite U5061-900 Bagged Upright...

Not finding what you are looking for?
Vacuums Logo

Related Topics:

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18410 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...