Question about Canon PIXMA MP830 All-In-One InkJet Printer

1 Answer

Mp830 I purchased an mp830 2 years ago and within weeks it turned off and would not turn back on again. I took it back to the store and recieved a replacement. The unit has operated flawlessly for almost 2 years now and a few days ago the same thing happened. We did have a short power outage during the night, but have very good surge protecters on all of our equipment and have had no problem with any other devices. I keep the phone line for the fax unplugged unless it needs to be used account fear of surges thru the phone line that could burn out the modem. Any suggestions? Grant Hendricks lghendricks@sbcglobal.net

Posted by on

  • maureenlmcg Aug 14, 2008

    Same thing happened here about a month or six weeks ago. We had a power outage that lasted less than 1 minute and have not been able to power the unit on since. We also have surge protectors on. Can someone PLEASE help??

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had this problem and I UNPLUGGED the printer and left it over night. It reset and works fine!

Posted on Aug 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 324 singer memomatic. Carriage is stuck solid and won't move. It has been stored for a long time. Is it possible to get the carriage off in this instant if so how?


First are you referring to all internal carriage working parts or just bobbin workings ? I just got done last nite with a Kenmore that was sitting who knows how long and was completely froze internally and bobbin area covered with green muck . After cleaning that up still froze ,oiled any and all mechanical points and rocking back and forth about to give up ,found one more location on back of machine ,oiled heavy and began turning very hard over and over and became loose enough for motor to turn . So don't give up . Good Luck .
Regards , Douglas

Jan 13, 2017 | In Office Equipment & Supplies

1 Answer

We have a fellowes shredder. It got full and jammed. After cleaning and emptying it will not turn on. Is there a reset button? Thanks. Betn


We've found that when the container is overfilled with shredded paper, it will begin pulling shredded paper back into the cutters and jamming the machine. Sometimes reversing the machine will spit the paper back up, but if it is thoroughly jammed, only way to unjam it is to UNPLUG it first, then manually remove the paper from the cutters. Then, be sure to dump the container BEFORE it is filled with paper.

...

Jan 12, 2017 | Fellowes Office Equipment & Supplies

1 Answer

My Canon PIXMA MX700 is not turning on! I have checked all the cords even moved from one outlet to another and its still not turning on. Should I just purchase an new one this model is an old on


Do you have a CD to install this printer? if you do go into MY COMPUTER where you can erase things and erase the printer and its system then shut computer off and restart then reinstall the printer using your CD to reinstall it. Some times you have to delete things and reinstall them to work.

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

I want to show a 6% sales increase from last year to this year. How do i figure it?


take you sales for the last year and put it into a calculator, then press plus + and then 6 and then the per cent key %

Or

Take your sales from last year, multiply by 6 and then divide by 100. That is the amount you will increase. Add it to last years sales.

Jan 09, 2017 | The Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

3 Answers

How do i solve an error e000-0000 canon ir 2202 please


Dear
Its related to the fixing temp. do the error clear on service mode. then check the fixing film assy. heater circuit contact points for corrosion. Replace it.
Thanks.

Dec 12, 2014 | Canon Office Equipment & Supplies

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

6 Answers

Printer won't recognize cartridge


I had the same problem. I'm not sure but I think I replaced the cartridges when the printer was on because I turned the printer off and removed one of the cartridges. When I turned the printer back on it recognized that cartridge but not the others. I turned the printer off again, rmoved all cartiridges and put them back in when the printer was still off. When I turned the printer on again I had no problems. So...try turning off the printer, rmove all cartridges, then put them back in and restart printer. Hope this works for you .

Nov 28, 2007 | Epson Stylus 2200 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA MP830 All-In-One InkJet Printer Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98608 Answers

old marine
old marine

Level 3 Expert

1566 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...