Question about D-Link DIR-615 Wireless Router
The default username is admin and there is no password. If this does not work then you will need to reset the router to factory defaults. There should be a button on the back of the router. Push this button down for at least 30 seconds. After that everything should be reset. You will be able to log in with the username admin and no password. From there you should be able to configure your router as well as change the password and username.
Posted on May 18, 2011
Step 1: Open a web browser and enter the IP address of the router in the address bar (default is 192.168.0.1). Press Enter. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response Thanks, Joe
Step 2: The default username is admin and the password is blank (nothing). Click OK.
Step 3: Click the Tools tab and then click Admin to the left.
Step 4: To change the administrative password, enter a new password in the Admin Password section.
Step 5: Click Save Settings to save the settings.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Posted on May 18, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 09, 2013 | Computers & Internet
on May 24, 2011 | Computers & Internet
on Dec 24, 2010 | Computers & Internet
Dec 05, 2013 | Computers & Internet
Jan 25, 2013 | Microsoft Internet Explorer 9
Click start Control Panel.
Select "User Accounts and Family Safety," then "User Accounts."
Click "Turn User Account Control on or off."
Remove the check mark next to "Use User Account Control (UAC) to help protect your computer."
Set All Accounts to Administrator
Still in the UAC section of Control Panel, select "Manage another account," and click on a user account.
Click on "Change the account type." When working with multiple accounts, some changes can only be made if you and the account holder are both logged in with "Administrator" accounts so you need to change all user accounts to "Administrator."
When you are done making changes, you can change them back to "Standard," but always leave at least one "Administrator" account.
Select the "Administrator" radio button.
Click "Change Account Type" at the bottom right.
Repeat this procedure to change each user account to "Administrator." When all user accounts have been changed, close the Control Panel.
Create a Full Administrator Account
Click "Start" (the Windows Vista icon in the lower left of your screen). In the Search box, type "cmd". Right-click on "cmd," and select "Run as Administrator." An elevated command prompt window will appear.
At the command prompt, type "net user administrator /active:yes", and press "Enter."
Choose a password and assign it to the "Administrator" account, by typing "net user administrator 'password'", where 'password' is your selected password. For instance, if your password is "abc," type "net user administrator abc". Press "Enter."
Type "exit" and press "Enter."
Log off. When you log back into your "Administrator" account, you will have full rights.
hope this helps
Sep 17, 2012 | Dell Inspiron 530s Desktop Computer...
To change the administrator password, you must know the current administrator password. If you're logged in as the administrator, open Account preferences and click the Change Password button.
If you don't remember the password and automatic login is turned off, you can reset the administrator password using the Mac OS X User Install disc.
IMPORTANT: Because a user with the Mac OS X install disc can gain unrestricted access to your computer, you should keep the disc in a safe place.
To reset the administrator password using the Mac OS X disc:
Be sure to change your login password in Keychain Access to match your new password.
Aug 05, 2011 | Apple iBook G4 Mac Notebook
Mar 23, 2011 | Computers & Internet
Feb 24, 2010 | Microsoft Windows Vista Home Premium with...
May 23, 2009 | eMachines T5274 Desktop PC
92 people viewed this question
Usually answered in minutes!