Question about Gestetner DSc224 Copier

1 Answer

Gestetner 2850 Please help, I have done all possible. Blank copies???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Check the charge corona , if you open the front cover it is a little brown plastic block that has got one screw holding it and one wire connecting in the pcu , take the plug out and pull out the corona unit and check if the wire inside the silver frames is still there , look care fully it is as thin as a hair

Posted on Aug 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not making the copies


please heed to ahat the technician said and have it replaced for the problem to be solved
thak you.

Mar 08, 2014 | Gestetner Dsm675 Dsm775 Dsm755 Dsm765 Dsm...

1 Answer

Gestetner 6123cp


i have gestetner copy printer model 6123 cenhelp me removed earror code e-00 please help me

Aug 17, 2013 | Printers & Copiers

2 Answers

Gestetner 6123 paper jaming feeding section copy printer


nrg 6123 copy printer after make stencil line on copy soulition

Jun 15, 2012 | Gestetner - AO40 Wide Format Copier Copier

2 Answers

What causes error 12 on a gestetner 6123 duplicator


6123 gestetner digital copy printer no salve problum single line on copy. cleane complete scanner and thermalhead,

May 15, 2012 | Gestetner - AO40 Wide Format Copier Copier

1 Answer

Gestetner 2850 e error code sc541 what's the problem.


That is a Fuser problem.
There are here several post on how to solve it.
Just make a surch (or see my profile. I think it will be easear.

Jul 09, 2011 | Gestetner Printers & Copiers

1 Answer

Gestetner DSC 232SP: I purchased this copier used and it had printing ok. My color copies are coming out horrible. they are displaying a white line in the same area on page after page. Even after I ran a...


The white line or lines are NOT caused by the fuser. A defect "line" in the fuser would cause the symtom of the print rubbing off the page but not blank lines on your copy. First we need to separate your copy quality issues. This machine uses 4 drums, 4 developer units and a transfer belt. Most copy quality issues will reside in 1 or more of these units. Lets start with a few questions. 1)Are your copy quality issues ONLY on color copies? or are the black and whites poor too? 2) Are you running copies only thru the document feeder or have you made any copies from the glass?
Are you printing on the copier from your computer?

Dec 04, 2009 | Gestetner DSc232sp Copier

2 Answers

I have gestetner 2722ztd copier when i replace the explosure lap the copier dispalys error code e1 on the screen .how i clean/remove the error massege ? please help me


Please check after replace the continuity the expo lamp,expo thermofuse.The E codes are displayed in the copy counter.To display both digits of the E codes press the enter key.
E 11 - Exposure lamp error.Possible cause: expo lamp open,expo thermofuse open,power supply defective,main board defective.
E 12 - Exposure lamp error.Posible cause:AC drive board defective,main board defective.
E 13 =Zero cross signal error.Possible cause:main board,power supply defective,zero cross line open or the conector on the main board is not conected correctly.
For reset turn ON/OFF the main switch unplugged wait 10sec and turn ON or:turn ON the main switch,turn DIP switch 101-1 ON/OFF and turn the main switch OFF/ON.The DIP switch is located in the rear parts into the main board.

Sep 20, 2009 | Gestetner Printers & Copiers

1 Answer

Printing blank page with error message SC322


This is an SC error related to the laser unit.
Switch off and on the printer. If the error still appears, the printer has a defective laser diode or a defective Laser unit.
Please call an engineer to repair your printer.

Good luck and please rate me, thanks.

Oct 06, 2008 | Gestetner P7535n Laser Printer

3 Answers

Gestetner-2412Z copier-error code UF


UF is a panasonic code,the u means user fix.If you have an users guide it will tell u what to do.

Mar 03, 2008 | Gestetner DSm515pfd Digital Copier -...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gestetner Printers & Copiers Experts

Bernard D'Souza

Level 2 Expert

161 Answers

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

Are you a Gestetner Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...