Question about Audio Players & Recorders

1 Answer

I have a Hitachi AX-M131U

A body

Posted by on

  • RW87 Aug 14, 2008

    I have a Hitachi AX-M131U Hi-Fi system connected to a dedicated digital aerial. Following the instructions in the manual (which I have to say are extremely poorly translated) on tuning to DAB stations I have done a full scan during which 28 stations were detected. The first of these is JUICE and tuning defaults to this (as the manual says it would), reception perfect. My trouble is that I cannot then change to any other station! If I use the "Search Forward" button on the remote I can step through all 28 channels (names displayed and I've counted them) but the output remains firmly tuned to JUICE, without any interruption. If I pause at the name of another station, it continues to show for a few seconds (still JUICE output) and then the display reverts to "JUICE". The manual is of absolutely no use, and all my experiments with other buttons to store stations or tune to anything else have proved fruitless. What is going on please?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 319 Answers

What?...

Posted on Aug 14, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: how do i reset a

push the funtion button till dab bomes up on the screen then push in the info button and it will start to retune dab. for a total reset just push the select button 1 second after you hold the info button for 5 seconds

Posted on Mar 10, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L300 Saturn 2003 trying to replace my throtter sensor. Can't figure out where to start from. Have no idea where's it located.


Your vehicle has electronic throttle control an the Throttle position sensor's are internal to the throttle body assembly ! Your vehicle has two throttle position sensors .
Throttle Body Assembly
The throttle assembly contains the following components:
?€¢ The throttle blade ?€¢ The throttle actuator motor ?€¢ The throttle position (TP) sensor 1 and 2 You have to replace the Throttle Body Assembly !
Disconnect the negative battery cable. Remove the inlet hose assembly from the throttle body. Disconnect the throttle body electrical connection. Disconnect the hose clamps from the plenum-to-runner connector using theJ 43914 .
Remove the intake plenum bolts. Remove the EGR passage bolt. Rotate the plenum up and remove the throttle body coolant hoses, EVAP hose, and vacuum line from the throttle body.
Remove the throttle body nuts. Remove the throttle body.

Aug 05, 2015 | Saturn Cars & Trucks

1 Answer

Change complete body on 93 geo tracker


how to change,? how to remove it and then? what?
its not like a light bulb....
the cars whole body, needs replacement. the whole thing.
this car has real frame, so you must detach all harness ends
from all drivline parts. including in the engine bay.
then all shift linkage.(on a 5speed it be the shifter too) after console removal (center)
then all those body to frame, bolts.
take sharp left turn and body and you falls of car. (jokinig)

now lifting it, you will need, like 8 people to do that by hand
or a gantry crane
or a huge tree and chain hoist.
lifting the body, invites damage to the body, or to the newone going back on. It can be done with many jacks and huge boards to protect t
the body, and jack up the body in stages, and then slide the rolling
chassis from under the body.
my guess? is you have a car with good body bad driveline
then one more bad body with good driveline, right, is that the store?

Oct 11, 2014 | 1993 Geo Tracker

1 Answer

How do you calibrate, it's a body fat scale, can't find model #?


It's important to find the model number to be able to find the correct manual. Below is a link to FAQ's about Taylor body fat scales.
If you do a google search for "taylor body fat scale" you will see a list of a few models. Examine each to see if one of them is the same as yours.
Taylor USA FAQs Scales

Searches related to Taylor body fat scale model number location

taylor body fat scale model 5741 manual
taylor body fat scale model 5761bf
taylor body fat scale model 5731f reviews
taylor body fat scale accuracy
taylor body fat scale 5731 review
taylor body fat scale athlete mode
taylor body fat scale readings
taylor body fat scale5758f manual

Aug 01, 2014 | Taylor Health & Beauty

1 Answer

Throttle body sensor location 2005 uplander


the sensor is part of the throttle body and not replaceable here is the throttle body replacement instructions as you will have to replace the entire throttle body it is a very common issue with these
THROTTLE BODY ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE
  1. Remove the air cleaner intake duct.
120434113
  1. Disconnect the electronic throttle control (ETC) electrical connector (1) from the throttle body (2).
113356645
  1. Remove the heater pipe nut at the throttle body.
  2. Remove only the heater inlet pipe.
113356646
  1. Remove the nuts and the bolts from the throttle body.
  2. Remove the throttle body assembly.
  3. Remove the throttle body gasket.
  4. Clean and inspect the throttle body gasket mating surfaces.
NOTE: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket surfaces and throttle body assembly may result.

Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.

INSTALLATION PROCEDURE
113356646
  1. Install a new gasket, if necessary.
  2. Install the throttle body assembly.
  3. Install the throttle body nuts and the bolts.
NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the nuts and the bolts to 10 N.m (89 lb in) .
113356645
  1. Install the heater inlet pipe.
  2. Install the heater pipe nut to the throttle body.
Tighten the nut to 25 N.m (18 lb ft) .
120434113
  1. Connect the ETC electrical connector (1) to the throttle body (2).
  2. Install the air cleaner intake duct.

Feb 03, 2014 | 2005 Chevrolet Uplander

3 Answers

`what is body fat weight


Human body weight is made up of body weight and fat weight (for many people the is excess fat). For a true weight the two are separated. A certain amount of the fat weight is considered normal and above that...you know!

Jan 21, 2013 | Health & Beauty

1 Answer

2004 jeep code 1763 what to do


P1763 - Governor Pressure Sensor Voltage Too High

This code is refer for the governor pressure sensor which is located in the valve body of the transmission. If getting power to the sensor and the wires are not open or shorted then the sensor will need to be replaced.

GOVERNOR SOLENOID AND PRESSURE SENSOR
REMOVAL

Hoist and support vehicle on safety stands.
Remove transmission fluid pan and filter.
Disengage wire connectors from pressure sensor and solenoid (see picture)
Remove screws holding pressure solenoid retainer to governor body.
Separate solenoid retainer from governor (see picture)
Pull solenoid from governor body
Pull pressure sensor from governor body.
Remove bolts holding governor body to valve body.
Separate governor body from valve body
Remove governor body gasket.

INSTALLATION
Before installing the pressure sensor and solenoid in the governor body, replace O-ring seals, clean the gasket surfaces and replace gasket.

Place gasket in position on back of governor body
Place governor body in position on valve body.
Install bolts to hold governor body to valve body.
Lubricate O-ring on pressure sensor with transmission fluid.
Align pressure sensor to bore in governor body.
Push pressure sensor into governor body.
Lubricate O-ring, on pressure solenoid, with transmission fluid.
Align pressure solenoid to bore in governor body
Push solenoid into governor body.
Place solenoid retainer in position on governor
Install screws to hold pressure solenoid retainer to governor body.
Engage wire connectors into pressure sensor and solenoid Install transmission fluid pan and (new) filter.
Lower vehicle and road test to verify repair.

zjlimited_748.gif

1 - PRESSURE SOLENOID RETAINER
2 - GOVERNOR

zjlimited_749.gif

1 - PRESSURE SENSOR
2 - PRESSURE SOLENOID
3 - GOVERNOR


Hope helps.








Sep 29, 2011 | 2004 Jeep Grand Cherokee

2 Answers

Where do I get a manual ?


you can purchase a manual of Taylor 5599 440 Pound Tempered Glass Body Fat-Body Water Scale on ebay or in amazon...http://www0.dealtime.com/taylor-glass-body-fat-scale-manual/products

Apr 27, 2011 | Taylor 5599 440 Pound Tempered Glass Body...

1 Answer

Body fat scale Question


Like all body fat tests, body fat scales don't actually measure your body fat percentage. They determine your body density. The examiner (or the scales) then uses a formula to calculate body fat percentage based on body density. These formulas just predict your body fat. Unfortunately there is no one formula that accurately predicts body fat for the whole population. Differences in age, gender, ethnicity, body size, and fitness level all have a significant affect on the results. Well, whether body fat scales measure your "true" body fat percentage or not doesn't matter! As long as they can accurately monitor changes in your body composition over time, that's all you need.

Aug 27, 2008 | Detecto DR150 Low Profile Digital Platform...

3 Answers

How do I get body fat help?


The scales don't tell you the whole picture - your weight is less important than your percentage of body fat when it comes to appearance, fitness, and health. Tracking your percentage of body fat better shows how you are doing with diet and exercise than measuring weight. Remember that weight is measuring not only your fat, but also you muscles and your bones. If you did some extra work at the jym, your body weight might be effected (muscle tissue is heavier then fat tissue).

Aug 27, 2008 | Detecto Portable Digital Visiting Nursing...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4853 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...