Question about GE Computers & Internet

Open Question

I have a Basic in wall timer, and I can't get it to work .Is there a wiring guide or a certain step by step instruction ? So that I may see what I'm doing wrong.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Idiots guide to S9600

Join the fuji forum and ask your questions there, loads of s9600 owners there

http://www.fujifilm.co.uk/myfuji/

Posted on Mar 22, 2009

efs_perpends
  • 1996 Answers

SOURCE: How do I get the Basic Guide and Advanced Guide.

Go to the canon support site here, choose drivers and downloads. The getting started guide is the basic one. The on-screen manual the complete user's guide. Both are downloadable.
If you choose the support and service tab instead, you will be able to search "printing problem" or some keyword more specific to your issue, and perhaps there is some solution in the Canon knowledgebase that will also address your concerns.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!


Posted on Aug 27, 2009

  • 176 Answers

SOURCE: installation of a basic GE in-wall timer

The black and white, The red wire is the ground. Ron

Posted on Aug 11, 2010

SOURCE: i need instruction to set

GE 15086 manual:
http://waterheatertimer.org/pdf/GE-15086-Manual.pdf

Posted on Nov 24, 2010

Testimonial: "Perfect and precise. Thank you"

SOURCE: My timer is set to

Honeywell product is not identified.
More information is needed to identify product. Add a comment with as much information as possible, to help expert locate correct information.

For example Honeywell makes timer controls for boiler and heat-ac units.
Honeywell also makes Aube brand wall and box timers for lights and pumps.
http://waterheatertimer.org/Aube-timers.html

Honeywell has a contact-us page:
https://honeywell.com/Pages/contact-us.aspx

Posted on Aug 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reprogramed utilital in wall timer 0141224 can-not get it into automatic mode


Jan 2013
1) Copy following link for large instructions, and correct wiring step by step:
http://waterheatertimer.org/Program-wire-Utilitec-0141224.html

2) Reset timer before programming to delete trace programs from factory testing.
Make sure there are no conflicts in programming, such as overlaps or inconsistent days of week for ON vrs OFF times. Make sure each ON has OFF.
Use 11:59 instead of 12:00 to avoid confusion.

3) This timer has 1 year limited warranty.
Buy another timer from Lowes and return defect in new package.

Feb 02, 2013 | Hardware & Accessories

1 Answer

I have a Intermatic self-adjusting wall switch timer and I can't program it even though I have followed the instructions 3 times.


Program 1 is ON, and program 2 is OFF, 3 is ON, and 4 is OFF, etc
Copy following link for EZ step-by-step programming for ST01C timer:
http://waterheatertimer.org/ST01C-program.html

Jun 05, 2012 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

I need programming instructions for my intermatic outdoor lighting timer


Hi Jeanne,

Here's a page with detailed instructions and pictures - that will guide you through programming. I hope this helps & good luck!

Nov 09, 2011 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

Need instructions for installing- model 0192773 instructions # 3 ses connect red timer wire to wire from fixture using wire connector What is the wire from the fixture, is it postive or negative? no...


Open following link for large print instructions, and specific wiring step.
Read the additional help for step by step action.
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html#wiring

The 'wire from fixture' means the wire that goes to the light.
One of the two wires that previously connected to switch is 'wire from fixture.'

The wire that goes to light will not show any power when it is disconnected from switch, and will not test positive or negative.

Single phase household electricity does not test positive or negative.
Household electricity is AC current which means the electricity is an oscillating wave that reverses direction either 50 or 60 times per second, depending on which country you reside.

For example each electrical appliance, like TV or treadmill, has small rating sticker, and in US, the rating sticker will show 60Hz. This is 60 cycles per second. A 60Hz appliance will not work in India or New Zealand or other countries that have 50Hz electricity.

Batteries are DC current and will test positive or negative.
Household electricity is AC current and does not test positive or negative.
Open following link for general illustration of household wiring:
http://waterheatertimer.org/See-inside-main-breaker-box.html

Sep 07, 2011 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

INSTRUCTIONS FOR UTILITECH SELF-ADJUSTING WALL TIMER MAKE NO SENSE! iNSTALLED, BUT HAVE TO TURN PORCH LIGHT ON MANUALLY EACH DAY; ALSO COMES ON SOMETIMES IN THE MIDDLE OF THE NIGHT! HELP!


1) Sounds like you have timer wired correctly.
The wiring is confusing for many people, so it's apparent you're a quality electrician.

2) There are no repairs for defective timer, but timer can be reset using reset button.
Reset will clear program conflicts and overlaps that cause timer not to operate as expected.

3) Model number of Utilitec timer is not given, so expert has to guess which fork in the road you want to choose.

4) If you have 0192773 timer and want do-it-yourself solution, open following link for larger print and photo illustrations that make programming easier.
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

5) If you have 0141224 timer, then open following link for larger print instructions.
http://waterheatertimer.org/Program-wire-Utilitec-LW60418.html

6) At any point, you can add a comment and ask very specific question about any part of the instructions for either in-wall Utilitec timer, or any Utilitec timer, or ask a question about almost any 60Hz timer on the market today.
That comment sends an e-mail, and then I will respond.
I have tested both Utilitec in-wall timers.

Take a moment and rate answer:
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Aug 31, 2011 | Hardware & Accessories

1 Answer

Bought a Utilitech #0192773 to replace an older and non-working Intermatic SS7 series. The Intermatic had a black wire connected to hot, and a blue wire connected to neutral, and a red wire was capped off...


Utilitec 0192773 replaces single-pole switch and will not work for 3-way applications.

Open following link for clear wiring and programming steps for Utilitec 0192773
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

Utilitec can also be tricky to program if you are setting up astro dawn-dusk function.

For others finding this thread, same wiring applies to in-wall programmable timers by GE, Woods, Swilight, Sylvania, Tork, Hagar, UPM, Leviton, Grasslin, Wattstopper, Westek, and Intermatic analog timers. Intermatic battery-operated, Brinks and Aube timers are wired differently since they also work for 3-way applications.

Jun 05, 2011 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

I do not have an instruction manual for the Intermatic E1400WC timer switch and I can't figure out how to program the on/off times.


Intermatic makes heavy duty Ei400 series 1HP 120V or 240V countdown timer that can be wired for single-pole and 3-way.
Open following link to identify Ei400 timer and download manual:
http://waterheatertimer.org/Countdown-timer-horsepower-ratings.html#Ei

Coundownt timers are used to control fans and lights that need to run certain length of time, and then turn off. For example bathroom fan or whole house attic fan

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.

May 28, 2011 | Solar Intermatic Digital Wall Self...

1 Answer

I have a 7-DAY DIGITAL-IN-WALL TIMER model number #141224. I have tried calling you peopel at least 6 times, staying on the phone for as long as a hour, and I still cant get you. I am having...


A) Open following link to identify timer and download instructions.
http://waterheatertimer.org/Program-wire-Utilitec-0141224.html

B) This timer is for single pole only and will not work for 3-way switching.
Timer does not have astronomical function.

C) If lights are blinking, timer is wired incorrectly.
Heres what to do
1) Timer-green-wire connects to bare ground wire.
2) Switch has 2 wires. Take switch wires and connect them to timer-black-wire and timer-red-wire. Choose either one for now.
3) In back of electric box are white wires twisted together and covered with wire nut. Connect timer-white to these wires.
4) If electric box does not have white wires described above, then connect timer-white to bare ground, along with timer-green wire.
5) Turn on electricity, and push ON-OFF button. If lights come on, timer is wired correctly. If lights do not come on, then reverse timer-red and timer-black wires.

D) If you have trouble with programming, add a comment and say specifically where you are having problem for return comment.
I have programmed and tested this timer. Information above is accurate and tested.

E) Add a comment for more free help

Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Apr 14, 2011 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

I am installing a intilitech 7 day in wall timer replacing an old mechanical 12 hr timer. The load is a 1/4hp 2 speed attic fan. The original wiring had hot in hot out of the timer. This has hot in, hot...


Utilitec does not make a 2 speed timer.
http://waterheatertimer.org/Program-wire-Utilitech-LW60419.html

1) One possible option is a timer with NO and NC terminals like Intermatic-Grasslin FM1 series rated 1 HP. This example timer would have the motor running continually on either one speed or the other.
http://www.intermatic.com/~/media/files/intermatic/products/instructions/grasslin/fm1%20series%20time%20switches.ashx

2) Inside a 2-speed motor are two separate windings.
Windings are loops of copper wire that cause the fan motor to rotate.
For 2-speed, each winding has to be connected to a different 'switch.'
For example, like a ceiling fan. You pull the chain once, and electricity flows to one winding. Pull the chain again, and the switch sends electricity to another winding.

3) The following wiring diagram shows ordinary on-off timer connected to 2-speed switch: This is the basic plan for Broan Nutone 2-speed switch timer, which might be the product you are replacing
http://blog.airscapefans.com/wp-content/uploads//timer_option1_1-1024x768.jpg

4) Nutone makes a 2-speed whole house fan timer.
http://www.nutone.com/PDF/InstallGuides/CFS2WHins89777.pdf

5) And open following Broan Nutone manual that show the two spped timer wiring
http://www.nutone.com/PDF/InstallGuides/CFS2ins57169.pdf

Jul 01, 2010 | Intermatic Inc. ST01C Digital In-Wall...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

brian soufane

Level 3 Expert

693 Answers

Are you a GE Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...