Question about Office Equipment & Supplies

1 Answer

Touchpad won't respond to touch, know how to fix?

Posted by on

  • 3 more comments 
  • santosj27
    santosj27 May 17, 2011

    What is the brand and model?

  • ronald_b_fut May 17, 2011

    Lanier LD335

  • ronald_b_fut May 17, 2011

    Sorry, somehow thought I'd added that in there.

  • jeff heightchew
    jeff heightchew May 19, 2011

    WOW!!!!!!! I bet it would be EXTREMELY helpful to know what kind of copier you have !! I know I am asking alot of you.... but is it a...XEROX,MURATEC,SAVIN,TOSHIBA,PANASONIC,NASHUATEC,DANKA,COPYPRO,LANIER,CANON,RICOH,GESTETNER,KODAK,MONROE,KONICA,MITA,MINOLTA,DUPLO,HP,ABDICK,DEK,OCE,RISO, I could go on. And THEN...it would be cool to know if it was a 5 copy a minute of a 180 copy a minute device. I say this as I have serviced most of these and the fix is different even among "same name" different speed as the size and therefore design is different. I bet there is a "twinkle" of light bouncing around in your head now.(hope so). So take a breath and strain the brain and give us something to work with. We would not be here if we did not wish to help. But if someone asks "My touchpad won't respond" ......thats like saying my car looks bad.....what do I do?

  • Sreelal Devadas May 20, 2011

    which iss your machine model if it is sharp, give me the exact model no I can tell you the solution.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 259 Answers

That is the touchscreen/touchpad is broken.
or usually problem with flexycable which to connect between touchscreen and PCB.
the solution. - you must replace a new.
but if you buy they are one set.
price about $30 - $37.

Posted on May 21, 2011

  • ronald_b_fut May 21, 2011

    Thank you edy_bubat. I will look into that today.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP Envy X2 hybrid touch screen unresponsive


why not ask HP< we are not hp, we are just a silly chat box, generic.
go to your support page
and load the screen drivers.
be best.
NO OS stated, (XP? Vista, , w7,w8, w10>
what?

i guess that mass of numbers above is
11-g010nr C2K61UA
that it?

https://support.hp.com/us-en/product/HP-ENVY-x2-11-g000/5296226


shows w8 and w8.1 only,
if running free w10 , well there you go, you wrecked w8

try the support assistant there.

does the device manager show the touch screen there

as OK, do an update there , right clicked./?yet?
be on line, not off line. or 1/2 the cure is missing.

Sep 05, 2017 | HP ENVY x2 11-g000 11-g010nr C2K61UA 11.6"...

1 Answer

Power Surge - GE Microwave


see this steps and fix it. God bless you

  1. Controller is confusedA power surge or random non-reproducible action of the universe may have resulted in the controller's program ending up in an infinite loop. Pull the plug for a minute or two to reset it.
  2. Defective Interlock switchesThis can result in the controller thinking the door is open and ignoring you.
  3. CleaningCleaning solutions (spray cleaner) may have gotten inside and shorted out the touchpad or controller. If this happens remove the touchpad, let it air dry for a few days, and then attach it back on the microwave.

22745e51-1827-44be-8335-7f79fb57e56d.gif

Jul 12, 2013 | Microwave Ovens

1 Answer

Buttons on microwave


testing every step and fix it. God bless you see the diagram attached

Microwave Buttons Don't Work
Touchpad and Control Panel


If the microwave buttons don't work the touchpad and control panel assembly are probably defective.
Touchpad


If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the dishwasher display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
User Control and Display Board


If the microwave buttons don't work the user control and display board are most likely defective and will need to be replaced. If some of the buttons work and some don't, it is more likely a touch pad problem and the touch pad will need to be replaced.
Main Control Board


If the microwave buttons don't work the main control board is most likely defective and will need to be replaced. If some of the buttons work the touch pad is likely the problem. If none of the buttons work the problem may be in the main control board.1_24_2013_5_23_47_pm.gif1_24_2013_5_24_54_pm.jpg

Jan 24, 2013 | Goldstar MV-1501 Microwave Oven

1 Answer

My microwave keypad wont work the light is on and the reading says please touch clock and set time of dry


SEE THIS CAUSES AND FIX IT. God bless you
Touchpad and Control Panel If the microwave buttons don't work the touchpad and control panel assembly are probably defective.

Touchpad If the microwave buttons don't work the touchpad might be at fault. Generally speaking, if the display is working and some of the buttons respond correctly but some don't, the problem is with the touchpad.
ser Control and Display Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

Main Control Board If the microwave buttons don't work the main control board is most likely defective and will need to be replaced.

10_2_2012_12_33_23_pm.gif

Oct 01, 2012 | Kenmore 80809 Microwave Oven

1 Answer

My Beko MW5104 is frozen and does not respond to any settings. It is permanently on at spin/end with the green light on. I can switch it on and off. I have unplugged it from the mains and switched it off...


see this causes and fix it. God bless you
Thermal Fuse If the dishwasher won't start the thermal fuse might have blown. The thermal fuse helps to prevent damage to the dishwasher by turning off power so that it doesn't overheat. Once blown, the thermal fuse will have to be replaced for the dishwasher to work.
Door Switch The door switch, or switches, are sometimes called interlock switches. The door switch prevents the dishwasher from running while the door is open. If the dishwasher won't start, the switch or switches might be defective. To access the door switches, remove the control panel or inside door panel - depending on the model. They can be tested for continuity.

Main Control Board The main control board provides power to nearly every component of the dishwasher. If the dishwasher won't start the main control board might be defective. YOU should first check for more common parts. Many times control boards are replaced unnecessarily because the problem was not diagnosed properly.
Touchpad and Control Panel If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced. On some models the touchpad and control panel are sold together and will need to be replaced at the same time.

Touchpad If the touchpad is defective, the control board might not get the signal for the selections made. If the dishwasher won't start and the display doesn't seem to change properly when the buttons are pressed, the touchpad might need to be replaced.

Timer The timer allows power to flow to the proper parts at the proper times. If the dishwasher won't start, the timer might be defective. Keep in mind that timers are often misdiagnosed as the cause of a problem. Check other components first before replacing the timer.


9_29_2012_12_28_36_pm.jpg

Sep 28, 2012 | Dishwashers

1 Answer

Dell 1420 the twoon touch pad don't respond and the usb ports don't respond so i cannot connect a mouse neither can use the touch pad buttons I am dead on the water help!


LOL, didn't you know windows 7 was just a tad bit better than vista? Why do you think microsoft will be coming out with windows 8 in the coming months by the fall of this year. They keep trying to get it right.

Go to Dell's site and see if there are Window's 7 drivers for your model. If not, try downloading and installing the Windows Vista drivers. Right now, you might not have a driver or a good driver.

Get online and got to www.google.com In the google search box type: "Dell Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Download and install the Touchpad drivers and the Chipset (which has the usb ports).

May 24, 2012 | Dell Inspiron 1420 (dncwja1_1) Intel Core...

1 Answer

Touchpad won't work


What's wrong with the touchpad? Rather than fix it if it is broken just replace it. In fact you can replace the whole palmrest which includes the touchpad that does not cost a lot.

Maybe you turned the touch pad off.
Click Start/Control Panel and look for the Mouse and open it to check the mouse properties. Make sure you don't have the touchpad disabled.

Some models will allow you to toggle the touchpad on or off by clicking on the button that is located at the top of the touch pad in the middle.

Some models will allow you to toggle the touchpad by tapping twice in the upper left hand corner of the touchpad.

Some models will require a keystroke to toggle the touchpad. Press and Hold the ALT or FN function key located at the lower left portion of the keyboard, then hit the key that toggles the touchpad. The correct key to hit will have the icon of a finger pointing at a square that represents the touchpad.

Maybe you just need to reinstall the touchpad drivers.

Get online and got to www.google.com In the google search box type: "Acer Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Download and install the Touchpad drivers.

May 13, 2012 | Toshiba Satellite M65-S9092 PC Notebook

3 Answers

My touchpad mouse won't work. it does not respond


If you are using XP, check your mouse settings under Control Panel. Make sure that your Touch Pad is enabled. If it is but it still won't work, have a mouse plugged into a USB port that will work correctly. Then download the latest driver from the Acer site for your touchpad. Uninstall the driver that is currently being used by your system. Then install the updated driver that you downloaded. This should allow you to use your Touch Pad. If not, you may have to take your laptop in for servicing.

Jul 15, 2009 | Acer Aspire One PC Notebook

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...