Question about GE DBXR463EDWW Electric Dryer

1 Answer

How to replace dryer belt - GE DBXR463EDWW Electric Dryer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 251 Answers

If you are having dryer problems and you cannot even get the thing to start, then you might want to start going through this check list of possibilities. There are a number of things that can cause your dryer to not run.

A couple of the most common problems are the thermal fuse has blown or the door switch is not operating properly. On many dryers if the thermal fuse blows, the dryer will not run at all. This fuse can be checked with an ohm meter. It should show continuity if it is okay. If there is no continuity then you need to replace it and also find out what else failed. This is a safety device that usually blows because something else allowed the dryer to get too hot. It is usually located in the back of the dryer, on the blower housing. Some are oval in shape and others are rectangular, usually with two wires attached.

A defective door switch or a bent door switch lever can also cause you to have problems. If the lever is broken or bent it will not activate the switch. If the switch is broken, this also will not allow the dryer to be started.

The push (or turn) to start switch can go bad, but is unlikely. To check this, hold it in or turn it and then check to make sure you have continuity with an ohm meter.

If the dryer starts and then stops when the switch is released check the control board or the ?even heat? control on some model dryers. Some dryers have a belt break switch that can fail or your belt may be way loose or broken.

Check for burn marks or burnt wires at the terminal block on your dryer, poor connections can cause all kinds of problems. Also poor connections can cause fires.

A bad power cord also falls into this same category.

Of course, always check that you have the proper voltage to the outlet that you are plugging into.

http://www.fixya.com/support/r4312805-dryer_maintenance

http://www.fixya.com/support/r3866744-dryer_not_working_dryer_not_drying

http://www.fixya.com/support/r3907570-buy_appliance_parts_online

http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

http://www.fixya.com/support/r4496386-dryer_cord_wiring_dryer_3_wire_or_4_wire

http://www.fixya.com/support/r4416566-dryer_repair_squeaks_grinding_clicking

http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start

http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

Posted on Jun 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put belt on hotpoint dryer


Dryer Belt Replacement - YouTube

? 6:23
https://www.youtube.com/watch?v=dFB4vnmADh0
Jun 20, 2011 - Uploaded by Repairs101
How to do-it-yourself instructional on changing the drive belt on an electric ... She wanted to know about replacing the drive beltin her clothes dryer. ..... How to replace tumble dryer beltHotpoint, Indesit, Ariston, Creda, Proline ...

How to replace tumble dryer belt Hotpoint, Indesit, Ariston ...

? 9:36
https://www.youtube.com/watch?v=kNJGHyEPiJA
Jan 30, 2014 - Uploaded by how-2-repair.com
How to replace tumble dryer belt Hotpoint, Indesit, Ariston, Creda, .... to get right and the grooves correspond to the drive, so really obvious..

Dryer Drive Belt (part #WE12M29) - How To Replace ...

? 5:14
https://www.youtube.com/watch?v=ZXSJlWcZPiY
Oct 25, 2013 - Uploaded by AppliancePartsPros
Buy the new Dryer Drive Belt WE12M29 ... to replace the Dryer Drive Belt WE12M29 on GE, Hotpoint, RCA, Sears, and Kenmore dryers.


Jan 01, 2016 | Hotpoint Dryers

1 Answer

Belt replacement


This article I wrote will assist you to replace the belt
How Replace The Belt on Your Whirlpool Dryer
Your dryer is made by whirlpool and this is how to replace the belt

Jan 30, 2014 | Estate TEDS840JQ Electric Dryer

1 Answer

Need to replace belt on vtd20g hotpoint tumble dryer


Hotpoint tumble dryer not turning? How to replace a Hotpoint tumble dryer belt.
This video will show you how to replace a tumble dryer belt in your appliance
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question. Tumble Dryer Belts How to Repair Home Appliances

May 10, 2012 | Dryers

1 Answer

The dryer squeels when operating and I put some belt grip on the belt. It helped for a little while but now it's worse than ever. The belt feels pretty snug. ???


This could be a few things. The idler pulley or drum rollers are the likely problem. Both are easy to check and replace. The belt should be replaced at the same time. Here is a couple links that should help
Dryer belt replacement video

Dryer roller replacement

Noisy Dryer

Dec 03, 2010 | Magic Chef CYE3005AYW Electric Dryer

2 Answers

When belt breaks is there an automatic shut of switch because the dryer will not run?


Yes on MOST dryers there is a belt safety switch. It is there to prevent you from using the dryer with a broken belt. (i.e heat but does not tumble) When the belt breaks the idler pulley arm drops down and trips the safety switch.

If you need help with parts, and replacement belt procurement / owner replacement of the belt, we need your model number please so we can pass you the correct information.

Just respond here and someone will help you.

Kelly

Aug 16, 2010 | Dryers

2 Answers

How do I replace the belt on my Asko T761 dryer? Do I go in thru the front, the back? Are there instructions on-line for belt replacement?


Hi,

How to install a belt on ASKO dryer
Belt Type: Flat belt with ribs
Installation Notes: Ribs go against drum

4ac4ac1.gif

You could Refer to :-

http://fixitnow.com/wp/2006/05/08/asko-t700-dryer-wheel-drum-and-belt-replacement-instructions/

It would be a Generic one but would help you.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Mar 11, 2010 | Asko T761 Electric Dryer

2 Answers

Whirlpool tumble dryer model NO- AWZ 121/3-belt replacement


how do i replace my belt on my tumble dryer

Jan 09, 2010 | Whirlpool Dryers

1 Answer

Belt/Drum Noise


The belt can be replaced as follows.
1 remove top and front of dryer shell
2 belt goes around drum around motor pully then under tentioner wheel
3 replace front and top of dryer
(top pops off use a slotted screw driver)
Thanx for using Fixya Please take your time to rate me

Jun 15, 2009 | Asko T761 Electric Dryer

1 Answer

Repair book for Belt replacement Roper REX5634PQO


1. unplug dryer
2. popoff the top off
3. take front off (unscrew)
now you can get access to the belt look in bottom of dryer there is a giude wheel for the belt
4. place belt around drum and pulley make sure you add tenstion
5. replace front and top

Thank you for useing Fixya

Feb 12, 2009 | Roper REX5635E Dryer

Not finding what you are looking for?
GE DBXR463EDWW Electric Dryer Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

JP Services
JP Services

Level 2 Expert

310 Answers

Cindy Wells

Level 3 Expert

5123 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...