Question about Office Equipment & Supplies

1 Answer

Printer is printing blank pages. i did remove the tape and tried 2 different toner cartridges. tried one of the failed toner on another 3035 and it printed good.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 145 Answers

It could be the coagulation of ink in between the cartridgebetter dip it in mild hot water for some times and replace it wiping the water. it would do the trick and solve your problem . it has been practicallytested.

If this solution helpful/useful for you please rate my solution. THANKS FORUSING FIXYA.

Posted on May 17, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hp laserjet 3055 printer print blank pages how solve it`


1) Check the toner cartridge: Is it new? Is any protective tape or cover to be removed actually removed before installation? Is there any other obstruction preventing the toner from coming out?

2) Check with the printer itself: the drum to pick up the toner may not be charged each time.

Sep 07, 2014 | HP LaserJet 3055 All-In-One Printer

1 Answer

Magneta Color (Toner) and when I print, the Magneta color does not print. Even on supplies status page, the yellow color section at the bottom is blank where the yellow color should be printed. How c


Hello,
The Magenta or RED toner cartridge should be removed and double check that you have indeed removed the pull tab located on the side of the cartridge which will remove the sealing tape off the new toner cartridge.
The YELLOW toner cartridge on the other hand if it is not new then it is perhaps empty and needs to be replaced. Another option is to remove the YELLOW toner cartridge from the machine, Tap it and shake it side to side to loosen the toner that is in it, and replace it back into the machine, this will usually make it start to work again!
Good Luck!
Rich Lilja

Aug 31, 2014 | HP LaserJet 2840 Printer

1 Answer

My printer is printing blank.


Unless drum low warnings have been ignored for a significant amount of time, this is most likely to be a toner cartridge issue.

I would recommend running off 15-30 pages in the hope that this pulls some toner through. Failing this I would recommend replacing the toner cartridge.

Nov 28, 2012 | Brother MFC-7820N Printer

1 Answer

I have installed a new ink cartridge and the z645 printer. It sounds and acts like it is printing, but the page is blank. After I first installed the new cartridge, I printed a test page, but only about 2...


Doing the "clean printhead/cartridge nozzles" multiple times would have cleared clogged nozzles. You can also try to manually wipe the cartridge nozzles with a slightly moistened soft cloth. If that still won't help, try to replace your cartridge with a different known working cartridge to determine if your other cartridge is faulty.

May 08, 2011 | Lexmark Z645 InkJet Photo Printer

1 Answer

When i send a test page from the printer p3005x it print blank page


Hello, Try a different cartridge if you have one (even a used one). Does it print anything? If "Yes" then the printer is most likely OK and the fault lies with the Toner Cartridge. Checks - 1) the Drum Flap operation, does it move freely. 2) Check the electrical contacts, look for bent pins or toner accumulation on the contacts. Replace the Toner Cartridge with a new one. If "NO" the Printer still prints blank with multiple cartridges, the a printer may need servicing, check the left side of the inside of the printer, this is where the toner cartrisge contacts are located, check for bent pins or paper obstructing the pins. USA Service Centre Support http://h20465.www2.hp.com/GPL/search.aspx?language_code=en&country_code=us&SearchType=SSP

Jan 15, 2011 | Office Equipment & Supplies

1 Answer

Colors are blurred and printing offline. colors arent showing up. all toners are new. reset the default setting, and aligned but still doing same thing


hello , I may try doing a printer reconfiguration page or page alignment again.

working properly. Press ✔. Press 􀀙 until INFORMATION is highlighted.
Press ✔. Press 􀀙 until PRINT CONFIGURATION is highlighted. Press ✔ to
print the page. If the configuration page does not print, consult the CD User Guide for more info on task.

hope this solves it. if not,

you may try this :

Incorrect shade

The sealing tape has not been removed from
the print cartridge.

Remove the sealing tape from the print
cartridge for the color that is missing. See
Changing print cartridges.

Inconsistent colors after installing a print cartridge

The sealing tape has not been removed from
the print cartridge.
Remove the sealing tape from the print
cartridge for the color that is missing. See
Changing print cartridges.

Another print cartridge may be low. Check the supplies gauge on the control panel
or print a supplies status page. See Printer
information pages.

Print cartridges may be improperly installed. Verify that each print cartridge is installed properly

please give use more info to the problem if it still persists and we can try and pinpoint further

Mar 27, 2010 | HP LaserJet 4600dn Color Printer

1 Answer

Konica Minolta PagePro 1350W laser printer. Have


your carteidge OPC duram is faulty .
so change cartedige

Apr 25, 2009 | Konica Minolta PagePro 1350W Laser Printer

3 Answers

Brother 2140 toner light on, won't even try to print.


To get every bit of toner powder out of the cartridge, first remove the toner unit from the drum assembly. Second, find the little circular window on the right-side of the toner cartridge. Third, place a piece of black electrical tape over the clear window, cannot be clear tape. Fourth, re-install the toner cartridge into the drum assembly. Last, put the complete unit back into your printer. This worked for me.

Apr 05, 2009 | Brother HL 2140 Laser Printer

2 Answers

Print faded after replacing black cartridge Brother 240C


The print heads don't appreciate being out of ink so the Brother printer has sensors to prevent that but the tape defeated that prevention. Maybe more cleanings or maybe a cartridge with printhead cleaning solution will help. Otherwise, I fear a new printer.

Dec 13, 2007 | Brother Multi-Function Center MFC-240C...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...