Question about Microwave Ovens

1 Answer

Over cooked in oven after 5 sec cuts out E41 (error mess) ref to book filter am unable to find filter is an industrial microwave oven where can we buy one at a good price in brighton

Posted by on

  • William Miller
    William Miller May 11, 2010

    Please reply back with your brand and model number so we can help you.

    Are you in the UK?


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Push start after a few seconds cuts out with error message e41
on samsung 1600w

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Exterior of oven , top and both sides gets very hot to touch, when cooking +- 10 minutes or more the last couple of days; no Error ( E41/42/45 or 47 are being displayed. Fan is normal, functions: OK


There could be food or oil buildup around the door frame which will absorb some of the radiant and microwave energy whilst cooking. Give it all a good clean and see if that helps. If everything else is working properly, it may be a problem with the cooling fan. Microwave ovens have a "stirrer fan" inside the roof or rear of the cooking area to disperse the microwaves and some convection / microwave ovens also have a cooling fan which assists in dissipating heat within the cabinet.

Jan 04, 2016 | Microwave Ovens

1 Answer

E41 and does not work


If your microwave is displaying an error code cycle the power to the microwave by either unplugging the unit, or cycling the circuit breaker.

If the above suggestion does not work,and the error code returns, your microwave will require service.

Aug 19, 2011 | Samsung MW1080STA Microwave Oven

1 Answer

Cm 1929 error code e41


i there i have a samsung cm1929 microwave and it coming up with the code e41 please help thanks mike

Nov 08, 2010 | Samsung MW1080STA Microwave Oven

1 Answer

Microwave starts as normanl but cuts out after 5 seconds on all settings?


sounds as either inverter or magnetron is faulty difficult to diagnose although when mag fault usually runs for about 22 secs inverter fails sooner around 5 secs.

Apr 09, 2010 | Neff H5642 Convection / Microwave Oven

1 Answer

Works for approx 30 secs then it cuts off with a error Code F7 message.


Assuming yours is a model KHMS2050SSS0, here is what the technical sheet says about the F7 error code:

1. Unplug microwave oven or disconnect power.
2. After 40 seconds, check to see whether this solves the problem.
3. Unplug microwave oven or disconnect power.
4. Check cooling fan operation
5. Check the magnetron.
6. Check P65 connection on the relay control board.
7. Check the P56/P66 connection between relay board and relay control board.
8. Check wiring to the 1200W inverter and control system. See “Checking Inverters.”
9. Check operation of all interlock switches.
10. Replace all parts and panels before operating.
11. Plug in microwave oven or reconnect power.
12. Check voltage at 4903-1 on relay board. If it is 120, unplug microwave oven or disconnect power.
13. Replace inverter.
14. Replace all parts and panels before operating.
15. Plug in microwave oven or reconnect power.
16. If problem persists, unplug microwave oven or disconnect power.
17. Replace relay control board.
18. Replace all parts and panels before operating.
19. Plug in microwave oven or reconnect power.
20. If problem persists, unplug microwave oven or disconnect power.
21. Check for reversed plug connection on controls or loose wiring.
22. Replace all parts and panels before operating.
23. Plug in microwave oven or reconnect power.

(This troubleshooting guide presumes one does not know how to test electronic components. That's why they say to replace and part and check it again.)

You can find helpful exploded view diagrams and order parts by entering your full model number from the tag on the oven here.

If yours is a different model number, please reply back.

May 26, 2009 | KitchenAid KHMS2050SSS Microwave Oven

1 Answer

Our Microwave keeps running unless we give it a whack!


Hi firstly to see if it is producing energy, buy some 5mm light emitting diodes from an electronics store. cut off the leads close to the plastic body.
place in microwave and put on cook for max 10 secs, if the led's light up you have microwave energy, shut off the oven as soon as they glow otherwise you end up with a mess.
If you have energy then your problem is most probably the door interlock micro switches which after time do not operate properly. let me know the results and we can go further.

Feb 23, 2009 | Danby DMW1153 Microwave Oven

1 Answer

Microwave power interruption


the unit may be detecting a mal-functioning magnetron.

Jun 02, 2007 | GE Spacemaker JVM1640SJ Microwave Oven

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...