An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert who has answered 200 questions.
Re: my computer is connected but cant display any of the...
Hi Jenny, This problem sounds as though your hard drive has failed or you have lost your system boot record. Depending on the brand of laptop, at start up keep pressing the delete key or the F1 key to enter setup. check this area to see if your hard drive is recognised, if it is not shown then it has failed and will need to be replaced. If the drive is shown then you will need to run your recovery disk or XP or Vista disk in a repair mode to repair your boot file. Regards mistyman
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had the same issue on windows 7 last week. I just downloaded another browser to see, and it worked fine. firefox,or chrome, browsers are good and fast. Be sure you have a good internet connection first. Good-Day!
I think your Display monitor cable damage, or may be your motherboard display cheap damage, or your display driver problem create.
First of all you check your display driver or reinstall driver. Sec think used external VGA card or check it. If not solved then your monitor display section damage. So contact good monitor technician.
Hi, this is how to setup your printer on your computer; -You should have the printer cable which is working and the installation CD that came with the printer. -Insert the CD into the computer and open the icon named setup and follow the on-screen menu. -After the setup is complete, connect the printer and power it on for it to install -If it connects you are done , if not check the cable connections and make sure it displays on the printers and hardware part. You can check this by clicking start and pointing mouse to that icon on windowsxp.
It is always good to print test page after installation.Good luck.
u can try dowloading the latest firmware for the n1vision router...
here is the link....
download appropriate version and save in the hard disk....
login to router page...
type 192.168.2.1 in internet explorer...
password leave it blank and click submit....
click update firmware on the left....select browse and update the firmware dowloaded... after updating, login to the router page again and click on restore factory defaults(must)....your problem ll be rectified....
we have internet connection.all is connected.we cant open the pageand microsoftword any other icons.It opens bt take a long time to open tis pages amd any other icons? wat is the solution for the slow movement of opening tis icons?sometimes it displays cant open the page.wat the problem?
Hi, Check all your connections are fitted properly it could be a faulty wire if you can try another wire then do so & see if that solves the problem. The only other thing it could be if you had your machine apart & maybe the video card is not pushed right into the slot look for the small white clip that clips into the rear of your PC inside the machine. If none of this works then I suggest your video card is no longer working properly so you need a new one. Please leave me feed back: Malcolm Campbell, Thanks.
unplug the printer from your computer. turn power off. see if printer goes through it's start sequence, and will print a test page(from menu)...then, connect to computer, and see if you can print test page from computer.