Km400-m2 driver - EliteGroup KM400-M2 Motherboard

http://www.ecs.com.tw/ECSWebSite/ECSSearch.aspx?menuid=0&lanid=0&keyword=KM400-M2


ECS SUPPORT SITE.

http://www.ecs.com.tw/ECSWebSite/ECSSearch.aspx?menuid=0&lanid=0&keyword=KM400-M2


ECS

Select Specification Tab after clicking on the links below..

Version 1.0
http://www.ecsusa.com/ECSWebSite/Product/Product_Detail.aspx?DetailID=365&CategoryID=1&MenuID=50&LanID=9

Version 3.0
http://www.ecsusa.com/ECSWebSite/Product/Product_Detail.aspx?DetailID=511&CategoryID=1&MenuID=50&LanID=9

or you can use Crucial Memory Advisor
http://www.crucial.com/

Yes, you can download the manual from their site.
ecsusa.com

Hi,

Try to install 2GB single RAM on the board because some time its not support 2, 1 GB RAM with different manufacturer.

Regards

Ashly

Vista Aero is dependent on your Graphics hardware, not on your motherboard. The onboard VIA/S3G is not going to be capable of running Aero, but you do have an AGP 8x port that you could buy a card for. Try picking up an ATI 48xx series card if you plan on doing some gaming. If you just want to run Aero, however, just about any card nVidia 76xx series, 86xx, 96xx, or any ATI 26xx, 36xx, or 46xx series card will do.

Everything you need is listed on ECS global web site, including the manual. Click on the link below to open the site. Scroll down to number 9. for manual;
http://www.ecsusa.com/ECSWebSite/SearchResult.aspx?q=KM400-M2&f=Downloads&MenuID=104&LanID=0

Enjoy!
Mike

Power off the system & unplug the power cored. Pull your memory. Than re-seat it. Make sure the memory is fully seated. See bios beep codes for the Award bios. Click this link;
http://www.bioscentral.com/beepcodes/awardbeep.htm

try google search

Every time after formating the hard disk and doing the fresh installation of windows, you need to install the driver i.e. in motherboard CD that you are got with your motherboard. After installation of all driver; the pc will work smoothly.