We installed new ink cartridges and we cannot get the printer to print since that. It says 'printhead loose or missing- error code 3513. It is a kodak ESP 3250. service no. is E116223

If the ink cartridges and printhead are already in the printer, remove them, then reinstall them.

1. Remove the color and black ink cartridges.
2. Remove the existing printhead by lifting the latch in the center of the carriage. ...
3. Close the printer access door. ...
4. Follow Step 2 above to install the printhead and ink cartridges.

http://support.en.kodak.com/app/answers/detail/a_id/1309/~/error%3A-printhead-is-missing%2C-not-installed-correctly%2C-or-has-come-loose http://www.fixya.com/support/t26068323-its_telling_me_print_head_loose_or

That means print head missing or not installed, take out the cartridges & check all ink pads on them are clean of residue or if new cartridge has had the new tape removed, also the the printhead area is clean & reinstall them, hope this helps, if not follow the added Kodak link below

Error: "Printhead Failure" (105-3802) - Kodak

support.en.kodak.com/.../error%3A-printhead-failure-(105-3802)

KodakAug 25, 2010 - How do I resolve the error message "Printhead Failure" (error code ...If you are not prompted to calibrate the printhead, turn off the printer, wait ...

Error: "Printhead is missing, not installed correctly, or has ...

support.en.kodak.com/.../error%3A-printhead-is-missing,-not-inst...

KodakAug 25, 2010 - How do I resolve the error message "Printhead is missing, not installed correctly, or has come loose" (error code 105-3513) on my ESP or HERO All-in-OnePrinter? ... If the printhead and ink cartridges are not installed in the printer, install them: ... If the error continues, restart the printer and try to print.

THE PRINT HEAD is the LASER that puts the image on the drum which puts the image on the transfer belt then paper or the drum puts on the paper. Missing the Print Head !!!!!!!!!!!!!!!!!!!! did you get it second hand? Not something you can get at a store. Contact the company and see about it being repaired.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Try this link. Hope it helps.

Hello Dave,
The error that you are showing means Error: "Printhead is missing, not installed correctly, or has come loose" (105-3513) Please use the following link to help you trouble-shoot and fix this error:
Error Printhead is missing not installed correctly or has come loose 105...

Kodak esp c315 .i have the kodak esp c315 and keep getting the printhead loose missing or not installed correctl

Follow the steps on this tutorial to reseat the printhead.......

http://www.kodak.com/global/en/service/tutorials/AiOPrinters/ESP/printHead/01_PrintHead/index.jhtml



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Well, here is the proper way of fixing or troubleshooting that paper jam error in your printer

Open the printer access door and remove both of the ink cartridge, then remove also the printhead, after that close the printer access door, without those parts. Then it will show a message in the printer screen, "Printhead is missing or has come loose" or "Printhead Not Detected" Install the printhead, just the printhead without the ink cartridges. After that close the printer access door. Then it will show you a message"Ink cartridges is not installed,install ink cartridges". then open again the printer access door, then install the black ink cartridge without the color ink cartridge. then close the printer access door, then message must be " Color ink cartridge is not installed, install color ink cartridge" then install the color ink cartridge." the message must be,"New printhead is detected calibration require, load paper and press start"

Thats the way of overiding the paper jam error message of your kodak all in one printer
hope this will help you guys

by: E.brown

Happy Printing(", )
Kodak AIO tech support 1-800-421-6699

I got the same Problem as listed above. This is the way how I was able to solve it:

• Remove the color and black ink cartridges and the printhead. (the 5300 Printhead can be removed by pressing a button on top of the carriage and a slight pull --> for better instructions use this official Kodak PDF)
  

• Try to clean the printhead and the carriage with a slighty wet cloth from ink. CAUTION!: better not touch the green electronic chip! Be carefull while cleaning.
  

• Reinstall the printhead and the ink cartridges.

• If the printer detects a 'new' printhead just do a calibration and your are done. If not try to print a test page.

Hope this solves the Problem. Best wishes