Question about Eureka Vacuums

1 Answer

Vacuum turns on and suction in hose works, beater bar won't turn

Posted by on

  • clarkie278 Aug 14, 2008

    beater bar won't turn

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 706 Answers

If you hear the motor in the head running and the beater bar isn't rotating, you probably need a drive belt. With the power off, make sure you can rotate the beater bar freely by hand, if it isn't bound up.. then locate and remove the baseplate screws to gain access to the beater bar itself, you'll see a drive belt pulley system and chances are, a broken belt. Replace it with a new one by pulling the beater bar assembly out of the housing and plcing the belt onto the motor shaft pulley as well as the beater bar pulley.. nest the beater bar back into the holder and reinstall the cover. Hope that helps !

Posted on Aug 14, 2008

4 Suggested Answers

  • 1 Answer

SOURCE: dyson DC 14 lost suction to beater bar/ suction to hose/stick

My Dyson DC14 had no suction...see if this works...turn the Dyson upside down...there is a length of hose that connects the bottom of the vacuum to the top, careful remove one end of the hose and check for debris...mine was clogged. Removed the clog and voila...it works. Thanks for the above info on checking the hose for cracks.

Posted on Aug 11, 2009

  • 8 Answers

SOURCE: beater bar on Dyson upright won't turn when handle is lowered

you need a new belt and maybe a new brushbar.

Posted on Dec 23, 2008

Blackberry_U
  • 223 Answers

SOURCE: Beater bar not working on Halo vacuum

Check the bar to see if there is a buildup of hair or string causing it to jam,

Posted on Jun 17, 2009

Vac Belts
  • 701 Answers

SOURCE: The beater bar on my Dyson won't turn. The vacuum

The belt doesn't have to be broken to make the vacuum not work correctly. If the belt is stretched the vacuum won't operate the way it is supposed to. You can get replacement Dyson Belts here:

Dyson Replacement Belts

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have strong hose suction but none below and beater bar is not turning


Beater Bar Belt Likely Broken--Can Be Checked By Removing Cover(s) Next To Beater Bar (on bottom)

Feb 27, 2015 | Dyson DC33 Multi-Floor Upright Bagless...

1 Answer

No suction for rugs but the hose works fine. Removed the canister and suction is at that point


Hello,

Remove the base plate and beater bar. Clean the suction cavity behind the beater bar. That's where they almost always plug up.

--W.D--

Aug 19, 2009 | Dyson DC17 Animal Bagless Upright Cyclonic...

2 Answers

Vacuum cleaner not picking up


Remove the beater bar and check in the suction cavity behind it. That's where they usually plug.

--W/D--

Jul 18, 2009 | Vacuums

1 Answer

Hoover U6476-910 - Very little suction from the bottom


If you haven't already, remove the beater bar. This is accomplished by unplugging the vacuum and turning it beater bar up. Remove the clips or screws that hold the plate on the beater bar and set aside. The beater bar sits in sockets, so carefully remove the bar, noting the correct position of the sockets. This will make reassembly much easier. Slip the beater bar out of the drive belt. Now, inspect the suction cavity that the beater bar would discharge into. Usually, things clog up here as there is a flex hose that catches things, creating a pluggage.
Hope this helps, --W/D--

Jul 18, 2009 | Hoover U6476-910 WindTunnel Upright Vacuum...

1 Answer

It has no suction...


Assuming that the vacuum will run, remove the bag and check the discharge to the bag from the machine for debris. Also check the suction to the vacuum blower by removing the beater bar cover plate and beater bar. Inspect the belt. While the bar is off, inspect the suction hose behind the beater bar. This is where I usually find the debris.
Regards, --WoobieDog--

Jul 10, 2009 | Oreck XL Ultra Bagged Upright Vacuum

3 Answers

Dyson DC 14 lost suction to beater bar/ suction to hose/stick


My Dyson DC14 had no suction...see if this works...turn the Dyson upside down...there is a length of hose that connects the bottom of the vacuum to the top, careful remove one end of the hose and check for debris...mine was clogged. Removed the clog and voila...it works. Thanks for the above info on checking the hose for cracks.

Apr 11, 2009 | Dyson DC14 All floors Bagless Upright...

1 Answer

DC07 works with the hose - but not when upright


Check the actual brush bar is moving. If it is then there's definately a clog and it could well be behind the beater bar. If you can remove the sole plate (which is the grid in front of the beater bar) then undo it and check dirt behind the beater bar, belt and main dust channel. Also check the main inspection air ways and if the beater bar is clogged with hair, clean it off.

Mar 31, 2009 | Dyson DC14 All floors Bagless Upright...

1 Answer

No suction


so the red hose isn't connected to a part on the vaccum so like it is connected to the connester but not to an opening just above the beater bar, this is the only idea i can supply you with. good luck, maybe i got lucky and helped you out.

Jun 12, 2008 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

Beater bar


You may have a bad switch, one part of it is not turning on the brush roll motor. It could also be the brush roll motor.

Feb 08, 2008 | Clarke CombiVac 12 Bagged Upright Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

2,601 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...