I have a hampton bay electric timer for my outdoor lighting. The automatic sensor seems to be not working. When I set on automatic the lights remain on all the time. Can the sensor be replaced? Thank you

Please an you send a pick of the unit when it's open on the input so we can go trough without Manuel as it's just a lux adjust ment

Hampton appears to sell generic timer also sold by Paradise, Moonrays, etc.
Manuals and troubleshoot on following links.
http://waterheatertimer.org/Malibu-power-pack-stopped-working.html#paradise1

http://waterheatertimer.org/Malibu-power-pack-stopped-working.html#troubleshoot

I do not recommend digital timers with 1 year warranty

Gene



Water Heater Timers Save Money

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Try looking at the manual
http://lightingworldbay.com/category/hampton-bay-manuals/

The light on the remote is a battery light. First mistake was buying a store brand fan which are mostly low-end parts. Try adding a different remote w/receiver.

Your yardstake timer has photo-eye that automatically turns lights on at dusk.
And then lights remain ON until set-time expires, or dawn arrives.
Timer automatically turns off at dawn, no matter which setting, unless timer dial set to ON
Photo-eye has to be turned away from outdoor lights or lights will blink.
That's because outdoor lights cause photo=eye to sense it's dawn, and timer turns OFF >>> a moment later photo-eye senses it's dark, and turns lights ON again.
Thus the timer turns ON-OFF.
Test this by putting black tape over photo-eye, or turning timer toward dark area. Timer should turn ON and follow set-time on dial.

turn thr glass clockwise to open.

It sounds like you may have a loose connection somewhere in the circuit. Check the output connections. Then see if there is a splice somewhere ...

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Ace hardware