Question about DVD & Blu-Ray Players

Open Question

Toshiba D-R4SU DVD/VCR Remote Codes

Does anyone know where I can find the correct code of this machine?
I am trying to use my DISH TV Remote Control to control the unit.
Every other component on my Home Theatre works just find, and was very easy to find their code by using the scan option built into the DISH remote control. I have used the manual mode and punched in every Toshiba code I could find. The scan method failed to work, and I ran it through scan for over 30 minutes.

The only thing I can think of is the unit has a 4 digit code instead of 3 digits. If that's the case I can run the scan for code option all day to get through all of the possibilities that 4 digits have. Looking for the code to enter into my Sony Integrated Remote Commander's (RM-VL600) DVD button so as to be able to control my Toshiba D-R4SU DVD Video Recorder. I have successfully program the remote for my other components.

Sure would be nice if I could find a code that works, even just, On/Off, Play, Pause, and Stop.

Thanks,

Kerry

Get Assistance just bounced: "Please enter a valid product." ???

Posted by on

1 Suggested Answer

  • 1 Answer

SOURCE: NEED CODES TO USE WITH ONE FOR ALL UNIV. REMOTE URC3300

Try holding down the tv power button and keep holding it while you press the channel button until your tv comes in.. It takes a few pushes. Make sure your tv is off first though.

Posted on May 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have dish network and an apex 1225 dvd player. i do not have a remote for the dvd player. i do however have a dish network platinum remote control. i am in need of the code to link this remote control to...


Try the steps below these processes are called a power scans, there is a different type for any equipment needed. This should take 5-6 minutes per item to program.

For DVD/VCR's:
1.) Press and hold the correct VCR/DVD button (about six seconds) until all mode button backlights come on, then release.
2.) Press 222 pound (#) then record three times.
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

For TV's:
POWER SCAN
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

For any other equipment:
Power Scan AUX
1.) With the desired equipment on, press and hold the correct AUX button until all mode button backlights illuminate (about 3 seconds), then release.
2.) press 0 for a TV, press 1 for a VCR/DVD, press 2 for any other device, then press *.
Press and release the large red Power button.
3.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
With any of these methods verify the code works by trying several different functions for that equipment.

Daniel Busa
DISH Network
Customer Service

Mar 20, 2011 | Apex Digital AD-1225 DVD Player

1 Answer

Can you tell me the 3 digit nunber to make my dvd/vcr compatable with dish network tv?


We would be happy to help you with getting your DISH Networkremote to control your Sanyo DVD/VCR combo unit. Pressand hold the VCR/DVD button located on the top of your remote until all mode buttonback lights come on, then release. Use the number buttons to enter thecodes for your Sanyo DVD/VCR combo unit; here some of the codes we currently have: 549, 583, and 608. Press the pound (#) button. To check that the codeworks try several different functions on the remote to make sure it willproperly operate the TV. Keep in mind that some codes may not be compatiblewith your equipment. If this is the case, try the other codes listed for thatdevice until you find one that is compatible with your equipment.
If you were not able to get your DISH remote to work with it with the codes provided, try a power scan. Pressand hold the VCR/DVD button located on the top of your remote until all mode buttonback lights come on, then release. Press and release the power button. Press the Up button once a second while pointing the VCR/DVD combo unit. If the code for the equipment comes up, it will power off. Press the pound (#) button.
We hope this help and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Feb 04, 2011 | Sanyo DVW-6000 DVD Player/VCR

1 Answer

I have Dish Network and I can't find a Code for my LG RC797T so I can get it to play


I'm assuming you are referring to using the dish network remote to control your DVD/VCR unit. Use the instructions in your Dish Network manual, mine is on page 61, "Setting up using device code tables". Refer to the table of device codes in the back of the dish manual, pg 119, to look up your manufacturer. I used the DVD codes for LG as LG wasn't listed on DVD/VCR combo codes. Try each one until one works. I have the LG RC797T and the third code worked 824. Good luck!

Mar 31, 2010 | LG RC797T

1 Answer

NEED CODES TO USE WITH ONE FOR ALL UNIV. REMOTE URC3300


Try holding down the tv power button and keep holding it while you press the channel button until your tv comes in.. It takes a few pushes. Make sure your tv is off first though.

May 09, 2009 | DVD & Blu-Ray Players

1 Answer

I need the codes to ste the remote control; dish for a Panasonic TVCR Combination TV Ser


i need the code to program a panasonic tv/vcr combo using a dish remote control.

Aug 30, 2008 | Panasonic DMRES30V DVD Recorder/VCR Combo

1 Answer

Dish Pro record code for Mag combo


ZNREL, I've done this with Dish Pro before. Setup the Dish remote to control the Mag combo in the VCR position. Press the SAT button and select the guide. Go to the program in the guide and select it. The "record this program" routine should pop up, set it up. Here's the key, make sure the Dish remote has the VCR button selected and that the remote is placed where it can "see" the Mag combo. At the set time, the Dish remote will change the DishPro to the proper channel and then issue s "record" command via infrared to the Mag combo to start recording. DishNet has all of the device codes to their remotes downloadable from their site.

Mar 05, 2008 | Philips Magnavox DVD/VCR Dual Player

7 Answers

Universal remote codes


I just tried the solution suggested by jcallahan on my Motorola DRC800 remote for my Cyberhome CH-DVD 300. The code that worked was 1023.

Aug 22, 2007 | Cyberhome CH-DVD 300 DVD Player

3 Answers

Dish network


With the dish remote and do a code search as described in the remote manual and see if you can find it that way. If you go through the entire code search and none of them turn off the VCR/DVD combo, then there is nothing you can do, as those codes in the remote are all stored in the remote and they cannot be programed in. If you do not have a remote manual to set up the remote, to do a code search, simply go to the dishnetwork web site and search for it.

Sep 27, 2006 | Emerson EWD2004

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96372 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...