Question about HP OfficeJet 6210 All-In-One InkJet Printer

2 Answers

HP 7410 streaks when using auto document feeder to make copies

I get a black streak (when making B + W copies) or a red streak (when making color copies) about 1 inch from the edge when using my HP 7410 printer's auto document feeder to make copies. I experience no problems when lifting the cover and placing the original flat on the glass to make either color or B+W copies. I am puzzled by this.
I get black streaks (when making B + W copies) about 1 inch from the edge when using my HP OfficeJet 6210 printer's auto document feeder to make copies. I experience no problems when lifting the cover and placing the original flat on the glass to make either color or B+W copies. I am puzzled by this. Please Help!! Thank You!!

Posted by on

  • cmpci08 Aug 14, 2008

    OMG!! thank you! you saved us from having to buy a new printer!! turns out, someone had tried to fax a piece of paper before the white-out dried...



    Thank you again!

  • jvsode Oct 28, 2008

    I have the same black line problem described. It only happens with the document feeder. My question is how does one get the document feeder open so that the glass can be cleaned?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 180 Answers

The document feeder of that unit have its own scanner glass. try opening the document feeder and clean the scanner glass with a lint free cloth that is moist with water and also clean the rollers of the document feeder

Posted on Aug 14, 2008

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Lift the cover of the fax/scanner/copier. The glass area has 2 sections, a small section and a large section. Clean the small glass section with damp cloth. I had 3 black streaks caused by 3 black dots on that glass. I also cleaned the rollers on the ADF, but that was not the problem.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP 2840- vertical black streaks on paper edges when copying using black only- copies fine in color


The Drum unit is worn or defective. try another drum unit. this should take care of your problem.If it's new then get your money back and replace it.

Dec 10, 2009 | HP LaserJet 2840 Printer

1 Answer

Im trying to get it to print copies only blanks so far


You can make multiple copies by loading them print side up into the upper feeder you'd use to fax, then entering the number of copies on the keypad and hitt the copy button for color or black
or you may lift up the carriage and place a page on the scanner glass, close the carriage select the number of copies and hit the copy button for color or black

Oct 30, 2009 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

My HP 7410 will not print in color. Black


my hp printer officejet7410 made a wierd noise and now the only color that anything prints is in reds and pinks.

Jul 13, 2009 | HP Office Equipment & Supplies

1 Answer

HP Officejet 6300 All-in-one machine makes black streaks


The problem is that that there a small piece of glass that the doc feeder use's to scan the orginal. You will have to clean the small glass it's about a half of a inch piece and is normally under the doc feeder unit. It will either be to the right side of the main copy board glass or it is under the doc feed unit where the paper goes down through the feeder. It is mostly some white out on the glass, just clean with a dam cloth with water or windex..... Good Luck

Nov 15, 2008 | HP 190 Copier

2 Answers

HP Officejet 7410 prints OK, but copy and fax comes out black all but 1 inch


The problem is on the scanner...
You have to change "scanner assembly". But... here in Greece this unit has not spare parts.... The repair procedure is "unit exchange". You have to contact HP Service in order to inform you if they can change only the scanner assembly and not whole unit... You can call telephone support.

Apr 07, 2008 | HP OfficeJet 7410 All-In-One InkJet...

2 Answers

HP 7410 streaks when using auto document feeder to make copies


Good, so u are having probs in ADF. Open the cover, lift the rollers and u can see the scanning glass. Take a lint free cloth and clean it. it will be ok.

Feb 03, 2008 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

Streaks


It sounds like the lamp/light is going out.  Open the top and try to make a copy and see if the light stays on the entire time.

Erice

Oct 29, 2007 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

HP 7410 streaks on scanning and copying


First you need to determine if it's doing from both the  top and the glass.

1-assuming you are using the feeder to fax,copy or scan (the part that automatically picks up the paper) it comes out with a streak. Make a copy putting the paper on the glass and look at the copy. Does it have the streak?

2-lift the top and look to the left there should be a small 1inch glass, this is where it makes the copies from the feeder, is there a dot or white out or is the glass dirty? that's your streak, the paper is moving to make the copy,so the dot now looks like a line as opposed to making a copy on the glass it just sits there so a dot will stay a dot.

2- Clean with water or alcohol.

Oct 23, 2007 | HP OfficeJet 7410 All-In-One InkJet...

2 Answers

Vertical streak near left edge of printouts....only affects black portion of print image


Where best to look will depend a little on the nature of the smudge. If what you're looking at is white, then you might just have a little heap of toner or paper dust on part of the LED array that paints the picture onto the photoconductor drum (look for a narrow unit that stretches full width, adjacent to the drum. Dark marks may, if you're lucky, be down to dirt on charger wires. Both respond well to cleaning with a vacuum and a soft cloth (be very gentle if cleaning the wires). I would be inclined to trust the existing photoconductor unit unless you know it's been abused (e.g. by leaving it lying around in daylight) or the coating on the drum is visibly damaged. A.

Apr 11, 2007 | Ricoh CL3000E Laser Printer

Not finding what you are looking for?
HP OfficeJet 6210 All-In-One InkJet Printer Logo

722 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...