Question about Kodak EasyShare Z612 Digital Camera

3 Answers

Menu button does not work

Appears I'm not alone with this problem. How do I get the menu button to work? Thanks for your help.

Posted by on

  • dirkkrisn Sep 21, 2008

    menu button does not work

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem and fixed it! There is a small resistor just to the left of the menu button that was misaligned in theproduction process and the slightest amount of shock(i.e. small drop or maybe even bumping the camera with your hand) wouldbust the resistor's connection loose.
I basically just pulled the cover off, removed the old resistor and bridged the two points and that fixed it.

I am putting a more detailed HOWTO on the front page of my site, you can view it without making an account, but feel free to if you want. I hope this helps a few people.

http://HouseOfChaos.gotdns.com is my site, I also took a few pics and should have them up tomorrow.

Cheers,
ChaosReigns

Posted on Sep 29, 2008

  • Seriago Oct 04, 2010

    It worked for me too. Although I was not able to 'bridged the two points' where the connector use to be, I carefully laid a small flat head screwdriver to bridge them temporarily and then pressed the (internally) menu button to access it and tell the camera to only use the internal memory when no SD card is in.

  • Betamail One Dec 30, 2011

    I Followed your instructions and it worked perfectly, great advice Thank you very much.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I did exactly what you said, and it worked. The component next to the menu button was broken, bridged the connection and it works. Thanks!

Posted on Sep 10, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

Try cleaning it with a soft cloth, press it severel times or try shake it a little bit.Anything pointy (not metal) would help u clean the button.As a last resort I recomand disassambing the part with the button, but that could be tricky...

Posted on Sep 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The FUNC button in the D80 does not work


In the menu settings, you need to assign the Func button to do something. The Func button alone will not operate until you assign a task. The tasks available are listed in the menu setting for the Func button.

Aug 09, 2014 | Nikon D80 Digital Camera

1 Answer

Have purchased some cartridges (compatable) for my Oki C5600 but i am unable to use them to to microchip.Is there a reset method or do i need to buy more chips?


Reset the Drum Counter:
a. Press the MENU 1/Menu 2 button while turning the
printer on.
USER MNT appears on the display.
b. Press the MENU 1/Menu 2 button until the message
corresponding to the drum you are replacing
appears. For example, if you are replacing the
magenta image drum:
MAGENTA DRMCNT
RESET
c. Press the ENTER/POWER SAVE button.
RESETTING briefly appears on the display.
d. Press the ON LINE button.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

May 25, 2011 | Samsung OKIDATA - OKI C5200n - Printer

1 Answer

LG TV 50PQ300:'Keylock on' .Cannot select 'set up' or 'input'.only AV1 works. Can anyone help please???


Press and hold MENU buttons on front panel and remote control until service menu appears.
Press MENU button once again.
Disable HOTEL option.

I hope this helps!

Apr 08, 2011 | Televison & Video

2 Answers

Problem for Sony SDM-HS75/B (Black) 17" LCD Monitor Menu buttons don't work but menu randomly appears


Try this:

Under the menu options, there's Menu Lock. Switch it to "On". It worked for me.
My menu button wasn't working, so to access the menu, I had to hold down the arrow up button and push the arrow down button till I got to the Menu Lock Option.

Dec 30, 2009 | Sony SDM-HS75/B 17" LCD Monitor

1 Answer

The menu screen appears witout me pushing buttons


The contact for the menu button may be stuck. It's at least five or six years old and may be on its last legs. If the menu button has shorted out, it may be more cost effective to replace it during Xmas sales. Check Amazon or Newegg.

Oct 14, 2009 | HP Pavilion F1503 15" LCD Flat Panel...

1 Answer

OSD Main Menu appears randomly and uncontrollably /flashing. Power Button does not always work. Need to keep clicking unti works.


hello..the problem is just sticky tack switch's so try to clean or re-align the frame/body of LCD..Thanks.Good Luck..^_^

May 08, 2009 | Dell E207WFP LCD Monitor

1 Answer

Dell 924 all in one will not print magenta


run a nozzle clean, perform the following steps:
  1. Verify the All-In-One Printer 924 is powered on and connected to a computer.
  2. Verify that the paper support (input tray) has clean, plain white paper loaded.
  3. Press the Menu button.
  4. Press the Down button until Mode: Maintenance appears on the LCD screen.
  5. Press the Menu button.
    The Dell 924 Maintenance Menu appears on the LCD screen.
  6. Press the Down button until Clean Cartridges appears on the LCD screen.
  7. Press the Start button.
    The AIO 924 prints the cleaning page. This process cleans the ink cartridges and resolves many print quality issues.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 19, 2008 | Dell 924 All-in-One InkJet Printer

2 Answers

Alba 3406 tvd


Connect pin 1 & 5 together (momentarily with a small switch), on the remote control handset. with the tv already switched on, This will put the set into the engineering set up mode. You can step between the various options by using the -/-- button. the Mute button invites you to save your changes which I believe is saved when you next press the -/-- button. there are 18 different service pages in all, be very careful not to change things which should be left alone, as this menu controls the way this set operates. The menu button exits the service menu. I believe menu 13 should be the AV-SND options menu, you can select either DK-I-BG or M sound systems. only set one system to "on"at any one time. You may also need to check 14, the C- SYSTEM options Menu. Good Luck, A D.

May 05, 2007 | Alba DVD-513 DVD Player

2 Answers

E173FP flat monitor


Try pressing and holding the menu button for 15 seconds! That should unlock the controls! Regards, babb

May 08, 2007 | Dell E173FP 17" LCD Monitor

Not finding what you are looking for?
Kodak EasyShare Z612 Digital Camera Logo

Related Topics:

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2598 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...