An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has answered 1,000 questions.
Re: TV CUTTING OFF ON ITS OWN.
Your problem is intermittent if you are not a tech have some one repair your tv the problem could be in your power supply,or horizontal circuit where the high voltage is.it can also be your micro processor. good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's got a bad board and needs a visit to a service center. Either the sleep timer is always engaged due to a board error, or it's got a diode overheating, or a capacitor breaking down. Regardless, it's generally worth fixing.
Any malfunction associated with an automatic shut down usually indicates a
circuit problem or defective component. Unfortunately, the days of taking off the back
cover of your TV and replacing a defective tube or fuse are long gone.
Proper servicing will require troubleshooting procedures that can only
be performed by a qualified electronic repair facility or professional
television repair person. Ask for an estimate and a realistic appraisal
of whether the set can be adequately fixed. Depending on the age and
condition of your TV it may not be cost effective to repair.
My tv will not turn on. We had been away for a week and no power interuption at home. We have unpluged the tv for short and long periods of time . We we attempt to turn the power on it cuts off by itself.
This problem is caused by your TV's V-chip setting.
To fix the problem:
Push the "Menu" button (on either the remote or the TV's fromt panel).
Use the "Channel Down" button to go to "V-CHIP SETUP"
Use the "Volume Up" button to select it.
In the V-chip setup screen, the rating that is selected by the user as viewable will allow that rating and only lower ratings to be viewed on that TV. (If TV-G) is selected, then any programs rated higher than TV-G will be blocked.
So, the easistway to get rid of any blocking is to set the rating to TV-MA (mature), and then any and all programs will be viewable on that set. Select "TV-MA" by hitting the "Volume Up" button after you have scrolled down to that rating with the "Channel Down" button.
Then hit "Menu" to exit out of the settings and saave your changes.