Question about Routers

1 Answer

Wireless g router

Recently my internet provider changed my login and password, now my router will not respond. Do you have any sugestions?

Posted by on

  • Anonymous Sep 03, 2008

    can not log on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 44 Answers

If you have the installation cd try reinstalling the router or

go on the internet and ddownload the info from the mfg. web site. No acess to internet at home, gotto the library



Lou Margolis
Allied Electronics

Posted on Aug 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I find my wep key number


You can find your Belkin WEP key on its bottom or back side, Normally all other routers are coming without password, but belkin asks its physical address has its WEP password,
you can change it's password and SSID by login in through internet explorer, both the username and password of router can find on it's backside, then follow some easy steps to change SSID (wireless name) and wireless password (WEP) min 8 charectors,
please don't try to change your username and password provided by your Network provider if are not a professional, (connection may lost)
Thank you rate if you succeeded

Sep 03, 2011 | Belkin Basic Wireless Router

3 Answers

My wife recently bought a nook. When she wants to connect wireless at home she enters the password I have written down when I installed the router but I must have it wrong. How can I go in to change to a...


Go to your router settings. Open up your internet browser, then type in 192.168.1.1 and press enter. There you can login to your router and change your network password.

Mar 05, 2011 | Linksys WRT160N Wireless Router

1 Answer

How do i find my security key for motorola wireless


The wireless security key is the encryption key that is set in the wireless router's configuration.
You need to connect a LAN cable from your computer to the wireless router, then open the Internet browser and enter the wireless router's configuration URL, then the default login and the password, provided the login and password has not been changed. The configuration URL, the login and password is in the Motorola router's documentation.
If you have lost the documentation then go to the Motorola's WEB site to download the WR850g wireless router documentation.

Jul 23, 2010 | Arris Wireless G Broadband Router (wr850g)

1 Answer

Lost web key for wireless internet


Most routers have a method to easily change the wireless password. You need to login into the router change the wireless encryption method. For example if you are using WPA then change it to WEP. Once thats done save the changes and the router will reboot. Now just switch back to the older encryption method and set a new key. Note that you should use the local ip to login into the router. If you don't know the local IP open command prompt. Start->Run-> Type in cmd and hit enter. Then type in ip config and hit enter. You should see an ip like 192.168.x.x. That is your local ip. Type it into the browser and hit enter. You will be prompted for router/modem admin username and password. Provide them and you can click on wireless-> security to change the password settings.
You can simply reset the router and re-configure it with a new key.

May 20, 2010 | Routers

3 Answers

My wireless feature is turned off and I want to turn it back on. How do I do that?


you need to login to your router, by opening up a broweser where the http:// is you put in there

192.168.1.1 or whatever address your router page is. you need your password most are defualt admin/admin.

Then you go to wireless security and turn that on.

Let me know ether way as I am here for you!

Please do leave your ratings and feedback for your free answer today.

May 08, 2010 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Need network security key or passphrase for my netgear DG834Gv4/DG834GBv4 !!! PLEASE( IP 192.168.0.1)


LOGIN
There is a login key for the router that can be accessed by opening the
address http://192.168.0.1 as described: after the login all settings inside the router can be changed.
Note: use a wired connection when going into the routers' ip address.

When you can not login with the default password, reset the device:

Restoring the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
router’s administration password to password and the IP address to 192.168.0.1. You can erase the
current configuration and restore factory defaults in two ways:
• Use the Erase function of the Web Configuration Manager.
• Press the WPS button and Wireless button on the side of the router simultaneously. You can
use this method for cases when the administration password or IP address is not known.

Resetting to Factory Default Settings
You can use this method for cases when the administration password or IP address is not known.
To restore the factory default configuration settings:
1. Press and hold the WPS button and the Wireless button on the side of the router until the Test
LED turns on (about 10 seconds).
2. Release the buttons and wait for the router to reboot.

WIRELESS SECURITY + PASSPHRASE
The wireless security is a network name for wireless connection called
SSID: the identification name of your router.
The passphrase is used for a secure password getting permission to have wireless data transfer from the router to the computer and vice versa. ( No internet connection so far: only Local Area Network [LAN] )


MODEM
Because the device is a router / ADSL modem you'r able to setup the
modem part for connection on a telephone line to the internet / Wide Area Network [WAN] .
You should use passwords from the Internet Service Provider [ ISP ] enter and save them in the modem section of the device.


Support for DG834G on the internet:
http://www.netgear.com/Products/RoutersandGateways/WirelessGRouters/DG834G.aspx

Sep 22, 2009 | NetGear DG834G Router

1 Answer

Can not get internet connection with my new netgear wireless router model dgn2000


Configure DGN2000 using the steps below:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
4. Access the router usually by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.
5. Login to the router (username = admin password = password unless you have changed it).
6. Click 'setup wizard'(at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoA Detected" and then click next.
9. Enter the login and password of ISP click apply.
10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.
14. Open up another browser window and try to access internet.

Sep 01, 2009 | NetGear WGR614 Wireless Router

2 Answers

Cannot connect through the router


With ethernet connected
Click start
click run
type cmd then ok
type ipconfig
take note of gateway address
type this into a web browser
it will ask for username password try these:
admin/admin
admin/blank
blank/admin
admin/password
root/admin
root/password
root/blank
by blank I mean enter nothing
When you login to the modem click on the wireless settings and record the wpa/wep key this is what you need to login through wireless.

May 25, 2009 | Linksys WRT160N Wireless Router

2 Answers

Connection problems...


Here are some troubleshooting steps that I suggest you try:

1. Check physical connections.

a. Connect the modem to the Internet port of the router. The Internet “i” LED on the front of the router should light up.
b. Connect the computer to one of the four LAN ports (i.e port 1, 2, 3 or 4) on the back of the router. The corresponding port light where you connected the computer should be lit up.

2. Access the router's web-based utility.

a. Please open any web browser like Internet Explorer or Netscape Navigator.
b. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
c. A window will prompt for a user name and password. By default, the user name is "admin" and the password is "password".

Note: If you were unable to access the router's web-based utility, you may reset the router to restore the settings to factory default.

To reset the router:

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then plug it back in.

3. Configure the router.

If your Internet Service Provider is using a DSL connection that does not require a login, please follow the steps below:

a. Click on Basic Settings under Setup tab.
b. Select No for Does Your Internet Connection Require A Login?.
c. Scroll down on the center page and look for the Router MAC Address section. Set it to Use computer MAC address and click on the Apply button.

If your Internet Service Provider is using a DSL connection that requires a login, please follow the steps below:

a. Click on Basic Settings.
b. Select Yes for Does Your Internet Connection Require A Login?.
c. Select Other on the Internet Service Provider drop down box.
d. Enter your ISP's username (username@ISPdomain) and password. Then, click on Apply.

4. Configure the wireless settings.

a. Click on the Wireless Settings under Setup.
b. Change the SSID to any unique name.
c. Scroll down, look for the Security Options settings and select WEP (Wired Equivalent Privacy).
d. Set the Authentication type to "Automatic" and the Encryption Strength to "64bit".
e. Leave the Passphrase field blank, select Key 1 and enter a 10-digit number.

Note: The 10-digit number you typed in the key 1 will be the password or network key for the wireless connection.

f. Click Apply button to save the changes.
g. Go to Router Status under Maintenance tab and check if there is an IP address under Internet port. If it's 0.0.0.0, do a power cycle.

5. Power cycle.

a. Power off the modem, router and computers.
b. Turn on the power of the modem first and wait for it to initialize, the lights to stop blinking.
c. Power back the router and the computers. Check if it will be able to get online.

If you have wireless computers, you can connect them wireless to the router. Kindly follow the instructions below:

6. Connect wireless computer to the router.

If you are using Windows XP with Service Pack 1, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Advanced tab.
d. Please delete all the preferred networks then click on OK.
e. Right click on the Wireless icon again and click on View Available Wireless Network. Please select your network and click on Connect. It will ask you for the network key.
f. Please type in the network key and then confirm it. Network key is the password you type on the key 1 of the wireless settings of the router.
g. Make sure not to enable IEEE and then click on Connect.

If you are using Windows XP with Service Pack 2, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Change Advanced Settings.
d. Click on the Wireless Networks tab remove all the preferred networks then click on OK.
e. Right click on the Wireless icon then click on View Available Wireless Networks.
f. Select your network and click on Connect.
g. It will ask you for the network key. Type in the network key and confirm it. Then click on Connect. Network key is the password you type on the key 1 of the wireless settings of the router.

If you are using Windows Vista, please follow the steps below:

a. Click Start then select Connect To.
b. Connect to a network window will show up.
c. Select your wireless network and click Connect.
d. It will ask you for a network key. Type in the network key and confirm it. Then click on Connect.

From the above configuration, please check if you can now access the Internet.

Jul 25, 2008 | NetGear WGR614 Wireless Router

1 Answer

Wireless router PPPoE login info


PPPoE login n password is from your Internet Service Provider that you sign up with.

Jul 15, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Routers Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...