Question about Panasonic Palmcorder PV-DV351 Mini DV Digital Camcorder

1 Answer

The view finder does not wotk

In last week the eye view finder (not LCT screen) stopped working. When I look through veiwfinder it is blank. Open LCD screen and the image is good on the LCD screen. Everything else seems to be working OK. I cleand in and around eye viewfinder but that did not help. Seems like some contact on view finder is not making good contact.

Posted by on

  • dayapatel Jan 03, 2009

    Do you just puu the eye piece? I tried a little, but was afraid to break it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try pulling out the eyepiece, it will reveal a switch that controls the focus, it maybe the problem, good luck

Posted on Jan 03, 2009

  • lee_hidson Jan 04, 2009

    You should be able to see some small raised ridges around the eye peice, if you put your finger nails behind those and gently pull it should slide out about an inch revealing the adjustment switch on top, lee.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Everything works except the view finder. Both through the eye piece or the display screen,


hi,
If EVF and LCD screen not giving picture, check the change over switch inside the monitor hinges clean it with contact cleaner spray, if it is OK, open and check the circuit on the mother board,

Feb 28, 2016 | Canon ZR40 Mini DV Digital Camcorder

1 Answer

View finder on my Sony HVR-Z5U isn't working, I can film through the flip out screen, but unable to use the eye piece view finder


POSSIBLY THE RIBBON CABLE THAT RUNS FROM THE EVF (VIEWFINDER) TO THE MAIN PROCESS BOARD SHOULD SWITCH REFERENCE TO EVF WHEN LCD PANEL MONITOR IS CLOSED REGARDS JOHN

www.jvsvisual.com

Mar 14, 2013 | Sony HVR-Z5U High Definition DV Camcorder

1 Answer

Hi, I have a Panasonic NV-GS17EB.It is working perfectly fine and a nice camera. But recently the LCD view finder is giving some problem. It goes blank when I open the LCD view finder fully. But it...


the ribbon cable that carries the signal to the screen sounds like it has become damaged
thatcan cause the problem
when it is all the way open it stretches the cable resulting in a gap to form, so when only open part of the way there is still a signal. see if there is anything in the hinge that might be causing the stretching of the cable, as that is almost surely the problem..

Dec 16, 2010 | Panasonic NV-GS17 Mini DV Digital...

1 Answer

My Sony Hc42 camera LCD, view finder gone blank


cheak ur lcd srip and there is a samll switch that chaing over switch cheak it

Jul 08, 2009 | Sony Handycam DCR-HC42 Mini DV Digital...

1 Answer

Veiw finder is blurred wen i look through it closeley,but far away its fine pls help


Garth
Under the veiwfinders eye peice is a small switch! look in veiw finder and adjust switch to focus and it will clear up for you!
Please rate this response and help us keep this area free!
Thank You!

Jan 21, 2009 | Sony CCD-TRV238E Camcorder

1 Answer

LCD and view finder not working


Well I saw on other post you can turn the screen outwards. It is very difficult to use....but you have to do what you have to do. For the view finder I am still searching for an answer..

Dec 12, 2007 | Sony Handycam DCR-HC42 Mini DV Digital...

1 Answer

Blank LCD screen


no screen display

Dec 01, 2007 | Samsung Video Cameras

1 Answer

LCD Screen not working


the problem of your camera is the flexwire cable of the lcd monitor that why you don't see nothing in the panel,Also the message 'cover is not open' appears,while the cover is already opened the switch on cover have poor contact..it is not covered by sony service...it have to replace or repair that switch and flexwire cable....

Aug 20, 2007 | Sony Handycam DCR-HC42 Mini DV Digital...

1 Answer

Blank screen


Hi: Check and see if there is an X as in escape out of the Menu Mode. If there is no X,then look fo OK. Good Luck. zeffy57.

May 27, 2007 | Sony Handycam DCR-HC40 Mini DV Digital...

1 Answer

Touchscreen is not working properly


I think the LCD connecting cable is faulty. Pl.ensure that there is no damage to the LCD screen as it is. If you need the LCD cable pl.e mail me videolabs@gmail.com

Jan 03, 2007 | Sony Handycam DCR-HC32 Mini DV Digital...

Not finding what you are looking for?
Panasonic Palmcorder PV-DV351 Mini DV Digital Camcorder Logo

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Video Cameras Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Lawrence Oravetz

Level 3 Expert

7686 Answers

abdul rauf
abdul rauf

Level 2 Expert

383 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...