Question about Neff 24 in. S5443X2 Built-in Dishwasher

2 Answers

Fitting a new front panel to the NEFF 54432 integrated dishwasher

Hi

Please can you tell me how to get the old front panel off so I can fit a new front panel to match the rest of my kitchen? Can't see any obvious screws or fixings except on the inside rim ofthe actual dishwasher door.

Many thanks.

Posted by on

  • 2 more comments 
  • simon866 Aug 31, 2008

    did you figure it out I have the same problem



  • bubblessyvre Nov 07, 2008

    I have a bosch disher washer and dont know how to take the door off to replace a broken door handle can you fix it .

    Thank you

  • gillian143 Nov 07, 2008

    My dishwasher's an integrated Ariston. The guy who installed it didn't put the wooden false door on properly - it's attached at the top but loose at the bottom and fouls the plinth - and I want to get it off and try again, but can't work out how it's fixed. Any ideas?

  • 3mickens May 06, 2009

    we are remodeling our kitchen and need to take the front panel/cover off the dishwasher and replace. where do I find a silver/black replacement? Please

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My Neff integrated dishwasher has two holding screws in the top corners and then two hidden screms half way down the side behind plastic covers. Loosen these side screws, remove the top two corner screws and then the door cover/panel should lift out of two lugs at the bottom.

Posted on Nov 08, 2008

  • payne_mrp
    payne_mrp Sep 22, 2012

    Thanks, very easy to do.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 246 Answers

Instead of removing the door panel and going through all the hassle---
go to www.applianceart.com
and get a replacement cover for your dishwasher.
These guys offer a hassle free solution to re-facing your appliances. Lots of styles to choose from including stainless.Fitting a new front panel to the NEFF 54432 integr - grantestzeus_4.jpg

Posted on Aug 29, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New AEG dishwasher wont fit in existing space that housed our old Favorit 44050 VI


The space underneath the dishwasher, or cabinets, is referred to as the kick space. It is where your toes fit under the edge of a counter and they are typical of cabinets and dishwashers alike. You should not expect a wood trim piece to fit underneath the dishwasher and not all dishwashers will accommodate one. It is fair to say that all dishwashers will come complete with a trim piece to cover this area, since some have venting and others do not; some have a door that extends down further and some do not. Generally speaking the variation people concern themselves with is in dishwasher's width and not in the door configuration. So having said and in consideration of your (assumed) desire to retain the wood trim, I suggest you retool the wood trim piece to work/fit with the dishwasher you decide you want. This is what I did rather than use the provided black metal panel. I have attached photos.
d8c6be34-1c2a-482c-8f06-f609e72b619c.jpg 9cc1da12-62a1-4b9c-9bc2-5a2b06e4845b.jpg

Mar 11, 2014 | AEG 24 in. Favorit 44050 Built-in...

1 Answer

Dimensions for tecnik 795/2


This dishwasher was made for tecnik (moben/kitchens direct) by bosch. Any Bosch, Siemens or Neff fully integrated 600mm dishwasher will replace this machine.

Apr 08, 2013 | Tecnik 24 in. TKD795/3 Built-in Dishwasher

1 Answer

My Neff integrated dishwasher has been used 5 times and now no power lights coming on and nothing happening. This is a new build and purchase is out of warranty as we have just moved in 2 years on. The...


the only thing i can say is that you should ring up the company and tell them what is happening and ask them can they tell you what to do

Sep 03, 2012 | Dishwashers

1 Answer

How do i fit smeg integrated smeg dishwasher


Not sure I understand the question. Are you asking how you fit your new dishwasher into the old dishwasher's hole, or are you asking how you get the actual measurements of the dishwasher because you're building a new set of cabinets and need to build it to fit?

Sep 02, 2012 | Smeg Dishwashers

2 Answers

Neff dishwasher removal


this may work - if it is an integrated dishwasher you should have a star shaped screw attaching the door to the machine on either side (about half way down). try pulling the machine out - and then looking for the holes on either side at the front. insert a star screw driver (may not work with other screwdrivers) and release the bolts (screws) then slide the door upwards.


Jan 17, 2009 | Neff 24 in. S5456 Built-in Dishwasher

1 Answer

Adjusting the door on a neff dishwasher


I have the same problem with my newly installed Miele integrated dishwasher. The door does not stay open when you are trying to load dishes. I heard that there is an adjustable internal mechanism to adjust the tension on the door. But, I am still working on solving my problem.

Mar 16, 2008 | Neff 18 in. S5943 Slim-Line Built-in...

1 Answer

Integrated dishwasher door fitting


open the front door. On each side of the inside of the door are various long screws, unscrew these and the old door will fall off. discard the old door and follow the same steps in reverse to put the new door on. It took me 10 mins to do. Hope this helps

Apr 12, 2007 | AEG 23 in. Favorit 50750Vi Built-in...

Not finding what you are looking for?
Neff 24 in. S5443X2 Built-in Dishwasher Logo

6,188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Dishwashers Experts

Samohthda

Level 1 Expert

11 Answers

shaun taylor

Level 3 Expert

1454 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Neff Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...