Ovens Logo

Related Topics:

Anonymous Posted on May 13, 2011

Neff double oven, element gone, problem is how do I remove the half moon element as one of fixing screws under fan. Need to know how to remove fan from shaft, I have removed screw and washer but it is held somehow

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 13 Answers
  • Posted on May 13, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that hasĀ over 10 points.

Problem Solver:

An expert who has answered 5 questions.

Joined: May 12, 2011
Answers
13
Questions
0
Helped
1961
Points
37

You have to take the oven out take of the back of it and theres screws there holding the element and the motor for the fan in place

  • Anonymous May 13, 2011

    Just fixed it, by using WD40 to get fan blade off shaft so I could get to third screw in middle of element.
    Once that was off the rest was easy.
    Oven now working OK.
    **** design, why did they not put a notch in the fan blade to allow removal of middle screw.

  • Anonymous May 13, 2011

    Yea some of the designs they have on brown goods make them really hard to fix glad to hear you got it sorted

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
2answers

We have a hotpoint cooker UY46, our electric tripped the cooker off and , now the nob and grill works but the bottem/main oven is turning on and the fan is circulating but not getting hot ? please help ;(

You need to replace the element. Very easy job remove the back plate from inside the oven (4 screws) and you will see a circular element held in place by one screw in the centre of the fixing plate. Remove the fixing screw then remove two wires and refit new element job done.
Regards Neville
2helpful
1answer

Fitting a new heating element Neff U1721

You need to remove the element from inside the oven cavity, but it is a bit of a fiddle. Once you have removed the screws at both ends of the element you need to remove the fan blade to access the centre fixing screw. Once all srcews are remove you have to twist the element and pull forward to remove the wires from the hole on the left, then remove the wires and refit to new element.
8helpful
1answer

Neff U1721 bottom oven not heating fan & light are ok

Yes it will need a new element, if the fan runs and temperature light comes on then the element is gone.
1helpful
1answer

Neff cooker not heating up

Hi, it feels like your oven element has gone.
switch it off from the mains, open the door and remove the screws fixing the back panel. You will find a round two turn element. Unscrew the element fixings and check the element for burnt marks, corrosion. If you have a multi meter, turn it to buzzer and use the meter leads to test the element connections. If it doesn't buzz, it's dead. Just needs replacing.
Cheers
0helpful
1answer

Removing a Fan

It should not be neccessery to remove fan to fit new element, I have never had to do so, but if you need to remove the fan blade, then unscrew the nut clockwise, as though you were tightening it, holding the fan blade as you are undoing the nut
Plz rate my solution.
Thanks.
2helpful
1answer

Unable to remove the fan blade on the neff u1721 oven (too tight)

The nut is a left hand thread, so unscrew it clockwise to release it, hold fan blade as you are doing this. Tighten anti- clockwise.
Plz rate my solution.
Thanks.
0helpful
1answer

Changing an element on the main oven - Neff U1721 Double oven

You should not need to remove fan to access the element fixing scew(s).
You may need what is called a torx screwdriver, if the screws are conventional screws, but some times a small screwdriver will undo them if they are not too tight.
let me know if you require any more assistance.
Plz rate my solution.
Thanks.
0helpful
2answers

Unable to remove the backplate off Neff oven

If there are no screws at the rear of the oven compartment that you can see to remove, then you will have remove the oven from the housing, and remove outer rear panel of oven to access the element.
Check the 4 fixings again, because on some ovens , they are not using coventional screws, they are are using what are called Torx screws, and you need a torx screwdriver or key to undo them.

Plz rate my solution.
Thanks.
8helpful
2answers

REMOVAL OF FAN

Ha - I found the solution myself. You need to remove the 3 screws securing the fan motor. Once you've done this, you can wiggle the fan a few mm, far enough to be able to remove the top element screw.
0helpful
1answer

Fan oven element - HEEELLLLPPPPP !

one element, but you will need to open the rear of the oven to access and remove the 3 screws holding the fan and with a little bit of push and shoving you will be able to remove the screw behind the fan be careful the screw does not get stuck behind the fan. Putting the new element in will require bending the securing bracket slightly but don't worry it will straighten when you replace the screw behind the fan; which is easier to replace than when you remove it
Not finding what you are looking for?

202 views

Ask a Question

Usually answered in minutes!

Top Neff Ovens Experts

Paul Carew

Level 3 Expert

3808 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

john h

Level 3 Expert

29494 Answers

Are you a Neff Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...