Format removable disk H - Computers & Internet

On a Windows XP-based computer, you cannot format a Memory Stick removable media device by using the FAT32 file system because there is no option to for FAT32 in the Format Local Disk dialog box. The only available option in the File system list in the Format Local Disk dialog box is FAT


So that you can use NTFS option to your HDD and then format the removable media device

When you attach the usb drive, after that right click on my computer icon and click Manage option. After that under Manage console select Disk Management, look for removable drives (that is your usb drive) under it and then format it. It will be formatted.

If that also doesn't work, use some special file formatting utilities like Disk Wipe, File Format etc.

Hi,

Below are the steps for formatting your player:

-Connect the disk storage (MP3 player) to your computers USB port. If the computer pops up a window asking what do you want windows to do? Click cancel. -Right click on My Computer and click on Explore. Look for the drive Removable Disk (E:) [The letter drive may vary depending on your computer] This is your MP3 player. -Right click on the drive Removable Disk (E:) and click Format¡K A small window will pop up displaying Format Removable Disk (E:) Click Start. Read the warning and click OK. Format is complete.This procedure can be done occasionally to erase all data on the disk storage.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Sometimes when a flash memory stick fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32. (FAT32 will allow data to be exchanged between MACs and PCs).
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health

Sometimes when a flash memory stick fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32. (FAT32 will allow data to be exchanged between MACs and PCs).
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health

Sometimes when a flash memory stick fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32. (FAT32 will allow data to be exchanged between MACs and PCs).
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health

It seems that the card is bad. Try to format the card on a different machine to rule out your Windows formatter.

1)I cannot format the pendrive. 2)when i double click on the removable disk,it says ''Please insert a disk into Drive E :'' 3)i used a pendrive format utility but the problem persists again. 4)i tried to format it using gnome also )I cannot format the pendrive. 2)when i double click on the removable disk,it says ''Please insert a disk into Drive E :'' 3)i used a pendrive format utility but the problem persists again. 4)i tried to format it using gnome also

FORMAT:Formatting
When using your MP3 player for the first time you should format it. Formatting prepares the disk (storage medium) for any reading or writing. It erases all information on the disk, and tests for any bad sectors or errors. Below are the steps for formatting your player: -Connect the disk storage (MP3 player) to your computers USB port. If the computer pops up a window asking what do you want windows to do? Click cancel. -Right click on My Computer and click on Explore. Look for the drive Removable Disk (E:) [The letter drive may vary depending on your computer] This is your MP3 player. -Right click on the drive Removable Disk (E:) and click Format¡K A small window will pop up displaying Format Removable Disk (E:) Click Start. Read the warning and click OK. Format is complete.This procedure can be done occasionally to erase all data on the disk storage..THEN REINSTALL AVI FILE:http://www.nextar.com/frontend/mp3_players.asp?MODEL=MA852&subpr=&categ=RICHARDM69

When using your MP3 player for the first time you should format it. Formatting prepares the disk (storage medium) for any reading or writing. It erases all information on the disk, and tests for any bad sectors or errors. Below are the steps for formatting your player: -Connect the disk storage (MP3 player) to your computers USB port. If the computer pops up a window asking what do you want windows to do? Click cancel. -Right click on My Computer and click on Explore. Look for the drive Removable Disk (E:) [The letter drive may vary depending on your computer] This is your MP3 player. -Right click on the drive Removable Disk (E:) and click Format… A small window will pop up displaying Format Removable Disk (E:) Click Start. Read the warning and click OK. Format is complete.This procedure can be done occasionally to erase all data on the disk storage.
http://www.nextar.com/frontend/support.asp?CATEGORY=10000309&MODEL=MA715&subpr=624950167&categ=519278318