Question about LG HBM-550 Wireless Headset

2 Answers

HELP.... THIS IS MY FIRST TIME CONNECTING A BLUE TOOTH, HOW DO I CONNECT IT TO MY PHONE ????? HELP....

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Well my user manual for HBM-550 says:

Prior to using the Headset for the first time, you must pair it with a Bluetooth enabled handset.
With the HBM-550 off, press and hold the Pwr/End button for 5 seconds,
You will hear two short beeps and the LED indicator will flicker in red and blue alternately, when the divice enters Paring Mode.

Using your Handset, find the Bluetooth Menu and "search for" or "add" new devices.
Select "LG HBM-550" from the list of devices and pair it with your handset.
When asked for the pass/PIN code during the paring procedure, please enter "0000" (4zeros).
Once paring has completed successfully, you will hear a beep.
After paring successfully, be sure to "Connect" to the HBM-550.
If you want to pair with other devices in the future, the headset must be placed in pairing Mode.
If the HBM 550 is in "Paring Mode" for 3 minutes, without being paired to a device, the Headset will automatically turn off.

Posted on Mar 29, 2009

  • tunaguvenel Mar 12, 2011

    I have not used my headset for quite a while. Recently I bought a VM Optimus V and wanted to connect to it. Could not find my manual and while searching for it on the web I came across your posting and it worked at first try. It saved lot of hassle. Thank you for your post. TG

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am trring to pair my bluetooth hbm-550 but it is not working a paired it with my phone but when i out in the pass code it is incorrect ......what else can i do

Posted on Apr 16, 2009

2 Suggested Answers

  • 287 Answers

SOURCE: i need instructions how to connect my h350 blue tooth to my lg cu400 cell phone

With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.

Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.

The default PIN or passkey is 0000 (4 zeros)

You need to enable bluetooth on the phone and go into pairing mode, search for devices or similar

HIH

Posted on Jul 12, 2008

lock123
  • 6831 Answers

SOURCE: I need help connecting my blue tooth to my phone device

Hello

If you are referring to connecting your pone to your blue tooth device(dongle pluged into your computer?), you activate the blue tooth on your phone, plug the device into youre computer and right click on the blue tooth icon in the bottom right corner which will appear after a few seconds.

Click on ad device, your device will then search for other blue tooth devices.
Your phone must then appear.
double click on your phone, then you will be asked to enter a password. Enter anything and then next.
Your phone should now ask for a password then enter it.

Now the devices are paired.

Now just use the send via Blue Tooth function.

Hope you find this usefull.

Posted on Sep 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need operating instructions for Jabra BT 2080 headset


ok i hope that you are trying to connect the bt device to a phone or game system or computer,the first thing you need to do is turn the power on to what you are connecting the blue tooth device to.your phone computer or game system,next you will have to put your blue tooth device into discovery mode,now most manufactures of blue tooth devices use the power button for this feature,when you turn the power on to your device keep holding down the power button for 6 to 10 seconds this will put your device into discovery mode,usually a light will remain on,then you can search or add new device from what it is you are connecting to,it will ask you for a pin or pairing code,now most manufactures of blue tooth devices use a factory 4 digit pin pairing code,they are as follows,0000,1234,9999,or 1111 enter the code and your device should pair and work with what it is you are pairring it to .i hope this helps

Feb 26, 2011 | Jabra BT2080 Bluetooth Headset

2 Answers

How do i make my backbeat 903 discoverable


Most manufactures of blue tooth devices use the power button to turn the discovery mode on,by holding the power button down for 6 to 10 seconds when turning on your blue tooth device a solid light should come on,that means your blue tooth is in discovery mode,then what ever device you are connecting it to has to have the blue tooth power turned on,then there should be a add new or search for devices,after thatyou will need a pin pairing code,Most manufactures use a factory 4 digit pin pairing code they are as follow,0000.1234,1111 or 9999 i hope this helps

Feb 22, 2011 | Plantronics Backbeat 903 Bluetooth...

1 Answer

Can i use my plantronics 230 bluetooth for my blackberry phone?


Hi, yes you can use plantronics 230 blue tooth for your blackberry phone.All you would need to do is to pair the device with your phone.that will do.

How to pair a phone to a blue tooth device?

Instructions

Pair Your Blackberry with a Blue-tooth Headset



Turn on Blue-tooth headset and Blackberry hand-held.

Enable the Blue-tooth radio by going to the options window and clicking on Blue-tooth. Click on Enable Blue-tooth in that window.

Add your Blue-tooth headset to your Blackberry by clicking on Add Device in the Blue-tooth window.

Find and select the name of your Blue-tooth headset from the list that appears. The Blackberry will search for all Blue-tooth devices within range, so other devices might show up on the list.


Click Activate Blue-tooth device if you receive a call and the Blue-tooth headset does not pick up automatically.



Use your Blue-tooth Headset with your Blackberry

Make sure the Blue-tooth radio on your Blackberry is turned on before you try to use your Blue-tooth headset.

Use the voice-dial feature to call contacts if your headset has that capability. Not all headsets support voice dialing, but more of the newer models do.

Press the on/off button on your headset to end a call or use the end button on the hand held.



Tips & Warnings

Pair your Blackberry with any Blue-tooth-enabled device using the same steps as those for connecting a Blue-tooth headset.

Remove your Blue-tooth headset from the list of paired devices on your Blackberry by selecting and clicking on Delete Device in the Bluetooth window.

Configure your Blackberry to connect to a paired Bluetooth headset without asking for authorization in the Bluetooth Device Properties window. That will allow your headset to automatically reconnect even if you take it out of range temporarily.

Only configure a Bluetooth headset to your Blackberry once. Once you configure the pairing between the two devices, the settings are saved and you do not have to repeat the processes each time you use it.

Turn off the Bluetooth radio on your Blackberry when not in use for security reasons.

Adjust volume on your headset or hand-held to a comfortable level. Excess volume from in-the-ear headsets can cause hearing damage.

Jan 06, 2011 | Plantronics Explorer 230 Bluetooth Headset

2 Answers

How do you connect it to a nokia 6300


To connect a jabra 250 to the Nokia 6300: On the Nokia go to menu > settings > connectivity > bleutooth = select and the next line = visible
On the headset when it is off > push the upper button for ┬▒ 8 seconds until the lamp is burning constant and release this button.
Choose on your Nokia on the same bleutooth menu > search audio.... It will be pairing in a few seconds . It will ask if it is ok to make the connection. The password is "0000" and push on "yes"
I hope you cann understand my english, I'am dutch.

Nov 17, 2010 | Jabra BT250 Consumer Headset

1 Answer

Need password to connect to my phone. Motorola bluetooth H371


Hi,it all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).

Hope it helps..

Thanks for using fixya...

Oct 27, 2010 | Motorola Mobility H371 Bluetooth Headset

1 Answer

Trying to sync with my blackberry 8900 asking for numeric passkey for my plantronic 220 ... dont think I needed this when I had a Motorola Razor.... annoying.... any thoughts.


the passkey is just like a password which is a single time entry into your phone for connecting blue tooth devices in a secured way.
once you enter the passkey the phone will be able to identify and connect to your device each time you search for blue tooth devices in the phone.so please do not get annoyed, go ahead and give a passkey of your own choice(like birth date. so that you wont forget it easily since you wont use it again until you reset the phone or connect other devices).
this passkey can also be used to connect it to laptops, desktops if they have blue tooth.

also remember this passkey is used to restrict any unauthorized access to your phone.!!!
should you have any questions please write to us again.thanks for contacting fixya !

Oct 23, 2009 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

I need help connecting my blue tooth to my phone device


Hello

If you are referring to connecting your pone to your blue tooth device(dongle pluged into your computer?), you activate the blue tooth on your phone, plug the device into youre computer and right click on the blue tooth icon in the bottom right corner which will appear after a few seconds.

Click on ad device, your device will then search for other blue tooth devices.
Your phone must then appear.
double click on your phone, then you will be asked to enter a password. Enter anything and then next.
Your phone should now ask for a password then enter it.

Now the devices are paired.

Now just use the send via Blue Tooth function.

Hope you find this usefull.

Sep 13, 2009 | Plantronics - Bluetooth Headset Plus Base...

1 Answer

Having trouble connecting Explorer 320 to Samsung Blackjack II


Push And Hold The On Off Switch On The Blue Tooth Till It Flashes Blue And Red. Then Search For The BlueTooth When Found Push The Button On The Blue Tooth Again. Hope This Helps

Jan 04, 2009 | Plantronics Explorer 320 Wireless Headset

1 Answer

Cannot connect


Push And Hold The On Off Switch On The Blue Tooth Till It Flashes Blue And Red. Then Search For The BlueTooth When Found Push The Button On The Blue Tooth Again. Hope This Helps
www.Myspace.com/crossroadstonowhere2007

Oct 20, 2008 | Plantronics Explorer 320 Wireless Headset

Not finding what you are looking for?
LG HBM-550 Wireless Headset Logo

912 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Headsets Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a LG Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...