Question about Vizio L32 32 in. LCD HDTV

1 Answer

Remote control of VX32L HDTV10A

I believed that my son is playing the remote because when I'm trying to put the tv on by using the remote the tv it doesn't work but the remote light is blinking and after that i checked everything the battery is new,i put the battery in a right way.i was thinking that maybe there's something blocking that's why i can not use my remote.if you can solve my problem i would be happy and i appreciate it. thank you

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Could be a bad remote. Could be the IR sensor in the tv. If you don't have a another remote you can purchase one for less than 15.00 on ebay.
Steve

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My VIZIO vx32L/hdtv10a remote only lets me change channels. No volume up/down or power on/off function either


If your audio is being routed through a home theater system then you will not get vol control through the remote for the TV. You will have to use the home theater remote.

Feb 22, 2015 | Vizio L32 32 in. LCD HDTV

Tip

Vizio vx32L hdtv10a no pic or control, unplug to turn off


After having a Vizio for 2 and a half years. I left the room for a minute, i came back and the screen went black. There was still power to the unit and you could see that the back light was working, just no picture, no sound, and you couldn't use any of the buttons. The only way to turn it off was to unplug it. It would then start up, with the Vizio logo going from orange to white, and then do the same thing all over, no pic or sound.

HOW I FIXED MINE:Look through the back vents for a white light to make sure the backlight still works. I ordered a new "main PCB" from tigerdirectparts.com (you can also use searspartsdirect.com). This is the circuit board with all of the inputs on it (hdmi, cable, etc.) I opened it up, disconnected the old one, put in a new one and now it works fine. I used both serial numbers on the board to search for it online. It cost me $144 to do it, but that's better than $450 for a new TV. My tv is the vx32l hdtv10a. I hope that helps.

For me the part number was either (depending on the vendor) : 0171 2272 2174 or it was 3632 0212 0150. Check your circuit and see if any of those numbers match up.

on Jan 22, 2010 | Flat Panel Televisions

1 Answer

Our toddler son was playing withthe remote control and as a result the tv is showing channels as normal and no sound.The remote will not work and on trying to access the menu using the buttons at the side...


if the buttons on the tv itself are not working aswell as the remote the promlem is not with the remote. IS the TV old or second hand? its possible that the tv has failed and its just a coincidence, one tip would be to try a programmable remote controll like a one4all to see if that works, if see if the tv is still within warranty

Mar 05, 2011 | LG 32LG30 32 in. LCD HDTV

1 Answer

Tv remote quit working


The remote put out IR (INFRARED) signal that human eyes cannot see, you need to use your digital camera to see it, just point the remote at the camera's lens, you should see flashing light on your camera screen when any remote buttons is pushed.
You may have problem with the IR receiver in your TV, but find out first if the remote is putting out the signals
Parts:
http://www.shopjimmy.com/vizio-3642-0022-0189-ir-sensor.htm

worst case will be the main logic board.
http://www.shopjimmy.com/catalogsearch/result/?q=VX32L

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

Jun 28, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

VIZIO TV Black screen. Cannot turn off TV without unplugging.


I had a similar problem after having a Vizio for 2 and a half years. I left the room for a minute, i came back and the screen went black. I didnt hear an arcing sound though. There was still power to the unit and you could see that the back light was working, just no picture, no sound, and you couldn't use any of the buttons. The only way to turn it off was to unplug it. It would then start up, with the Vizio logo going from orange to white, and then do the same thing all over, no pic or sound. I would check the ceramic fuse first on the board that gets power from the plug.

HOW I FIXED MINE: I ordered a new "main PCB" from tigerdirectparts.com (you can also use searspartsdirect.com). This is the circuit board with all of the inputs on it (hdmi, cable, etc.) I opened it up, disconnected the old one, put in a new one and now it works fine.I used both serial numbers on the board to search for it online. It cost me $144 to do it, but that's better than $450 for a new TV. My tv is the vx32l hdtv10a. I hope that helps.

Jan 13, 2010 | Vizio VW42LF 42 in. LCD HDTV

1 Answer

My remote will not work


Dessasembly the remote control:
1.Clean,use the izopropilic alcool or 75%alcool or finest wisky the remote taste rubber pad.
2.Assembly the remote control,change the batteries(see the polarity).
3.Near on functional in the FM or MW radio (the distance to remote and speakerphone max.10cm) press any buttons to the remote control.If you can hear the emitent signal in the speakerphone ,the remote is work.
4.Try the remote to TV.If work is OK,if not change the infra LED.
The solutions is work 100%,I tested 25 years ago.

Sep 07, 2009 | Vizio VX32L Television

1 Answer

Broken LCD on Vizio VX32L please help


get rid of the Wii lol sorry to say that is what the go'n rate for thoes screens. good luck i hope you run across them cheaper

Aug 24, 2009 | Flat Panel Televisions

1 Answer

Vizio VW32L HDTV10A stopped responding with Vizio


Change the batteries in your remote. If your cat was laying on a button it could have drained them.

Here's tip - you can use your camera on your cell phone to see the IR signal coming out of your remote. Point the remote at your cam and press "On" or any button. You should see a bright flash with every key stroke.

Mar 06, 2009 | Vizio VW32L 32 in. LCD HDTV

1 Answer

Tv screen went blank


sound like the inverter circuit board problem. check & replace back same part# inverter circuit board. hopefully could help!!

Dec 29, 2008 | Vizio L32 32 in. LCD HDTV

Not finding what you are looking for?
Vizio L32 32 in. LCD HDTV Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Vizio Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...