Question about Printers & Copiers
First of all the error message is correct when it said that the print head is overheating, this may be cause or triggered by a full waste ink.
will be able to see the steps on how to do it when upi download the Service Manual for your printer.
Canon IP4000 Service Manual
Posted on Aug 12, 2008
Ciao per favore mi dici cose l'errore 5200
Posted on Feb 14, 2013
Tips for a great answer:
1. Turn Off
printer, cable power still plug in.
Stop/Reset button, don't release the button.
3. Press Power
button by holding without release and than release Stop/Reset Button.
Stop/Reset button two times (2x) now release the Power Button.
5. Wait until
service mode to zero (0).
6. Turn off
the Printer, cable power still plug in.
Stop/Reset button, don't release it.
8. Press Power
button don't release & than release Stop/Release button.
Stop/Reset button four times (4x), wait until service mode to "1"
10. Turn off
printer, and loose cable power, wait for one (1) minute.
11. Connect cable power, turn on printer again, now this printer ready to use.
Aug 23, 2011 | Canon MX300 Office All-In-One Printer
Jul 30, 2011 | Canon Pixma iP2700 InkJet Photo Printer
Follow these steps to reset the printer:
1. Turn the printer off with the Power button (if available).
2. Disconnect the data cable from the printer (not applicable to WiFi, Bluetooth or Infrared) .
3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. If troubleshooting a communication issue, reconnect the data cable (not applicable to WiFi, Bluetooth or Infrared).
Jan 27, 2011 | Canon PIXMA iP4000 InkJet Photo Printer
Oct 26, 2010 | Canon PIXMA MX300 All-in-One Printer
Sep 01, 2010 | Canon PIXMA iP4000 InkJet Photo Printer
Jul 10, 2010 | Canon Pixma Mp250 Allinone Inkjet Photo...
Dec 16, 2009 | Canon PIXMA MP170 All-In-One InkJet...
Jul 25, 2008 | Canon PIXMA iP4000R InkJet Printer
Feb 28, 2008 | Canon PIXMA iP8500 InkJet Photo Printer
6,679 people viewed this question
Usually answered in minutes!