Just need to know where to put the coolant - Alero Oldsmobile Cars & Trucks

Kecia, where are you putting in the coolant, that is where you want to add distilled water. Save yourself some trouble and buy premixed coolant then you do not have to add water. If not using premixed coolant, mix coolant and water 50/50, or half distilled water half coolant before you pour it in cooling system. It also sounds like you are having a overheating issue which you should have looked at sooner then later. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Fix Antifreeze Leaks 2001 2010 Chrysler PT Cruiser 2007 Chrysler PT...
How to Add Coolant Chrysler PT Cruiser 2001 2010 2007 Chrysler PT Cruiser...
Mixing Coolant from concentrate

open the hood look on the passenger side behind the headlight . check your owners manual for the correct coolant type for you vehicle don't just put water in it . that could mess up the coolant that's already in there . most vehicles from 2000 and up use 100k coolant in them now if water or 50/50 mix is put in the coolant just became 3 year 30k coolant and can mess up your coolant system warranty . WHAT YOU MIGHT DO IS TAKE IT TO THE DEALER SHIP FOR AN OIL CHANGE THEY WILL CHECK ALL YOUR CARS LEVELS AND LET YOU KNOW IF ANYTHING NEDS TO BE DONE THEY SHOULD PUT ANY COOLANT IN THE YOUR CAR IF NEEDED.

coolant causing a problem ???? would need to know more about this. what problems has coolant caused ???? did the engine freeze up in bad weater or did it eat away the pipes and sealent ???

you have remove tranny lines,at bottom open to drain coolant, put something under to catch coolant.remove house,move anything on the to pull out.

No fluids are consumed on any vehicle

No topping necessary, at all

You have a leak that needs repairing

In the Radiator. Most coolant you mix 50% WATER/ 50% COOLANT. Dont use universal coolant, you want the green coolant.

follow your big coolant line from your radiator to your engine
where that meets there should be a bubble like attachment under there is your thermostat.
Dont disconnect while engine is hot
drain some coolant before removal or you will have coolant everywhere

for a major fill- fill radiator not on hot eng let cool fille rad & & open vent valves on engine

that is the radiator light turn off vehicle open cap on radiator open the overflow bottle on the coolant reservoir put water/ coolant 50/50 pour som in the coolant over flow and in the radiator turn the car on let the radiator burp if you see a leak its the radiator needs replaceing if there is not a leak put more water/coolant in the radiator until its full/ put cap back on thats it/ Please rate my response Thank you very much

She didnt put washer fluid in did she? What will happen when car warms up and coolant expands in tank it will push some out will not hurt anything though if put washer fluid in will need to flush coolant system. if you havent run yet just drain coolant resevoir and refill