Question about Mintek DTV-373-D 37 in. LCD HDTV

1 Answer

Code #'s for remote control recognition

Just purchased Direct TV. New remote control does not recognize tv,need code numbers to program itself to Mintek DTV-373-D. Any suggestions would be greatly appreciated.

Posted by on

  • mclain4062 Aug 20, 2008

    Need remote codes for my Mintek so I can program remote with my HD device from Verizon Fios. Any help would be appreciated.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Turn on the TV, and the Direct TV receiver, then press MENU on the remote, go to the bottom and select PARENTAL, FAVs and SET UP(press the select button in the remote), then go to SET UP and press select, then go to REMOTE, there you will see all the steps to program your Direct TV remote not only for the tv, the dvd player and the home theater as well. Also you will see ALL the codes for a lot of brands of devices including your TV brand. NOTE: don't go to option on the remote that says "RF/IR", you don't need to adjust that.

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need code for remote. New remote needs replacing.


Cable and Satellite content providers control the remote codes,
and we apologize for any confusion during the remote programming.
Please try the following codes 10019, 0178, 10178, 0030, 10030,
0835, 10835, or for Dish Network try 627, 659 or 505. For Fios
TV (Verizon), try the code 3264. These codes may not work on some
universal remotes. If there is another code listed for Element
Electronics in your universal remote control guide, please try that
code. Refer to the Remote Control Guide under your TV’s model
number for more information.

May 09, 2009 | Element ELC-HS321 32 in. LCD TV

1 Answer

Direct TV remote


I think you mean Hughs when you're referring to your direct Tv remote? And you want that remote to turn on/off your Sylvania Tv, right?
I'd need to know the Hughs model number on the remote to know if it's a four or five digit code requirement. But here's a site that might help. http://www.remotecodelist.com/remotes/
Scroll down to Hughs and that link should take you to the DTV site where they have a wealth of info regarding codes. Find your model number remote control and you should have a list of possible codes to try.
If all this doesn't work let me know and I'll research sme more.
Good Luck!
Bill

Nov 25, 2007 | Sylvania SH50102 LCD Remote Control

1 Answer

No code available to program my SV2000 tv/dvd combo


The manufacturer for this television is Sylvania, the standard codes for TV/DVD combos will work just fine.

Apr 02, 2009 | Televison & Video

1 Answer

Sentry really big universal remote


Ya it does work with the codes given.. Just make sure you are close to the tv or product you are wanting to program -- other equipment can interfer ... hold search code button down until it stays on then press tv/sat or what ever u want to program then put in the code then power button, item should shut off-- if it doesn't work then try the next code for the brand of tv/sat/vcr u have.. here is the web site with the manual on it..3 different models of this remote just select the one u have from the list on the left.
http://www.sentryindustries.com/category/remotes/remotes_rmc10.asp

Dec 25, 2008 | Televison & Video

1 Answer

Need code to program toshiba tv with Direct tv remote


I HAVE A TOSHIBA 32A33 TV AND JUST UPGRADED MY RECEIVERS AND REMOTES I CANNOT GET THE DIRECT TV UNIVERSAL REMOTE RC64 CODES THAT THEY HAVE PROVIDED TO WORK, ANY ADDITIONAL CODES ? PLEASE HELP

Dec 06, 2008 | Directv RC23 Remote Control

5 Answers

Finding codes


how program my control sanyo for tv curtis mathes

Sep 12, 2008 | RCA DIRECTV Satellite Remote Control

2 Answers

Need remote control code for 32" X2GEN tv


Good luck. I have the same issue. No codes are available for the X2Gen. To make matters worse, it appears to use a non-standard frequency for the carrier signal, maening that other remotes won't work with the TV.

I purchased a learning remote, thinking I would just "teach" it the codes directly from the X2Gen TV remote. This didn't work either.

There appears to be no way to use any remote other than the one supplied with the TV. Whatever you do, don't lose it!

Jan 24, 2008 | Televison & Video

5 Answers

One for all universal remote model URC-3220 Attempting to program direct Tv receiver to remote. Need Receiver code number


Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC3220
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(www.sparky-uk.com)

Dec 27, 2007 | One For All URC-3021 Remote Control

12 Answers

Jumbo Universal TV Remote (Sharper Image-Innovage)


sharper image jumbo remote can't get it to program my philips/magnavox tv.

Dec 25, 2007 | One For All URC-9910 LCD Remote Control

4 Answers

Need code to program toshiba tv with Direct tv remote


someone esle found this.. and it worked for me

Program AV1 with 20695, program TV with 10765, then switch to AV1, press select/mute, enter 933, and press select

This will allow volume and mute controls while in DTV mode and allow power on and off while in TV mode. This worked for me on the RC32 remote control.

Oct 01, 2007 | One For All URC-3021 Remote Control

Not finding what you are looking for?
Mintek DTV-373-D 37 in. LCD HDTV Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mintek Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2296 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Brad Brown

Level 3 Expert

15111 Answers

Are you a Mintek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...