When USB connected Computer hangs - Computers & Internet

You're not trying to connect a high speed USB device into a low speed bus, are you?

try putting keyboard in a different usb port

How To Update Time Automatically of Spy Pen Camera

1)
Connect the camera to computer via USB cable

2)
Download GetSysTime at http://diganet.net/downloads.html

3)
Click GetSysTime.exe to update the date and time, the
time of the camera will synchronize with the time of computer after restart of
camera upon reconnecting.

Update the PCI USB card driver. This may fix the problem.

first not need to connect usb cable .
First install the driver and software then restart the computer then connect usb cable to computer then if it need driver clik on no at this time .
then install from sleected location browse your folder then locate the driver folder then it install

after connecting your USB drive or any thing just press Ctrl+Alt+Delete to open task manager from it select shut down and restart the computer with the USB plugged in.

plug in to computer
go to my computer
right click on drive
select format
turn off(after format unplug)
turn on =presto!

ya u are rite connect the cable thr will show that mtp connected then transfer music but is it hanged on than this means ur usb port has problem than try to use different usb port...make it sure u are using rear usb port of ur pc.....hanging problem is only due to breakage in transfer of data that is only due to low usb port...i have same problem i always connect my media player in front usb port of pc then i got to know that it has low speed than i connect it to rear of usb port in my pc that is high speed port than it worked smoothly

install every software and reinstall it properly without error! this problem does not came!

Some times it happens that Windows explore do not recognise the USB flash drives. There may be some causes: 1. Ckheck your flash drive & ensure that it was not burnt or have any physical damage. 2. Start the computer without flash drive and connect the flash drive to it. Noe ensure that your computer is not hanged.If your computer hanged than the flash drive is damaged. 3. if your computer is not hanged and not dectecting the drive,(fore windows) go to My computer, right click, properties, divice manager. In the device list see USB serial bus controllers. click + next to it to see the sub devices. 4. Now see that the computer has a listing for the flash drive. The listing may be as "Usb mass storage device", "Drive company name: etc. 5. If there is listing no listing for flash drive just disconnect it and see the device manager listing. some changes will occur or mouse pointer will show busy. Again reconnect the flash drive the same thing happens. 6. if your flash drive worked as in step 5 that means the the drive is ok and the compueter is ok. There is prblem with driver of flash drive that is currently installed. Please upgrade the driver from your flash drive manufacturer or it is ready to use device just unuinstall it from the device manager listing. Restart the computer. after restart connect the flash drive it will detect the drive. 7. if there is still a problem go to start run & type regedit and press enter to run registry editor. In Hkey_local_machine>software>Cruzer micro and delete it. restart the computer. 8. You wrote that if you connect it to USB port computer does not start. If above step 1 to 7 does not work means there is strong possibality of reading problem means the flash drive has errors on it and file system is damaged. This same thing happens with Cd drive with a cd having corroupt file system. i will prefer to take the flah drive to an local hardware expert or manufacturere.