Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

Wirless network problem

Hi

I want to set up a wireless network so that I can use my laptop wirelessly. I have installed a Belkin Router to my PC and installed the software for a Bluenext USB adaptor - successfully - I think. The signal is showing as excellent but I cannot connect to the internet and keep getting a message "acquiring network address" - this message is haning there permanently. I also note that encryption is "disabled".

I wonder if you can help me in simple terms as I am on a very steep learning curve here!

Thanks in advance for your help.

Posted by on

  • 1 more comment 
  • Anonymous Aug 12, 2008

    hi

    i am trying to intall belkin g mimo but it just says install failed



    help



    emma

  • Anonymous Aug 12, 2008

    hi

    trying to install g plus mimo wont install from disc or if i go to my computer to install it says failed every time



    please help



    emma

  • Anonymous Aug 12, 2008

    need to allow my wife's laptop to use my connection to get on internet. She is hooked to my computer but it is asking for my key or password phrase and I don't know what it is. How can I find the key or password phrase for my Belkin?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 162 Answers

The belkin router gets the wire from the dsl/modem in the seperate jack port in the back then punch into the address bar on a explorer window

192.168.1.2 and make sure you have it set to unsecure network, you can fiddle with the password system later on securing the network.

Posted on Aug 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a wirless router from family and can't get it up and running


To reset the Belkin back to the defaultsettings -
Press and hold the pinhole RESET button at the back of the router and thenpower for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open abrowser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jul 07, 2011 | Belkin Routers

1 Answer

Dear Sir , i have belkin model no. F5d7234-4H v5 G wirless router, my installation CD lost, Sir How can get these driver CD, can you send link driver,


Connect a LAN cable from Belkin to your laptop/computer'sLAN port, open a browser on your laptop/computer and enter the Belkin'sconfiguration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

May 24, 2011 | Belkin F5D7234-4 Router

1 Answer

Hi I have just installed a brand new Belkin wireless router and it works great with all computers and laptops in the family (including Apple products) apart from my daughters laptop...she has a toshiba...


Check the main computer you set up the network router with...you may need to go to the network status and tasks in control panel...click on this...then you will see a map of all the network devices connected...find the belkin router and click on it...in this window there should be a tab called wireless properties..click this...the wireless properties first page should have the wireless SSID name listed here...and if you click the security tab then the security type and network key are displayed here..You need to write down the SSID, security type, and network key and make sdure the toshiba laptop setting for the wireless network are exactly the same. There may be a link on the first page of the wireless securities saying copy to usb drive..you can use this to copy all network settings to and then transfer these settings in to the toshiba by using the network setup wizard.

Jan 04, 2011 | Belkin (F5D8231-4) Wireless Router...

3 Answers

Belkin wirless router lose signal after approx. 30


Check the wireless channel on the router.
Is it properly set ?
you can try changing the wireless channel on the router.
Or if that doesn't work then you can try to upgrade the firmware of the router.
for this you will need to open the set up interface of the router.
Click Here to know more about routers

Oct 26, 2009 | Belkin Wireless G Plus MIMO (F5D9230-4)...

2 Answers

I do not know how to secure my wirless network


Go to this link for a tutorial on how to secure your wireless :

http://cache-www.belkin.com/support/dl/securing_your_wireless_network.pdf

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Mar 02, 2009 | Belkin Routers

1 Answer

Wireless network


turn on your wireless adapter, search wireless network, find yours, connect to it, enter your passphrase and should be ok.

Jan 02, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

Wirless connection


You may update the driver of the wireless adapter installed to your Toshiba laptop.

Nov 09, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Connecting a laptop to belkin wirless router


Check the wireless settings of your router, ssid, channel and wireless security. Set thoe information on your laptop so that it will work wirelessly with the router.

Aug 17, 2008 | Belkin Routers

1 Answer

Belkin wireless set up


Hi, As you ave the modem in bridge mode and also it works ine with wired connection just follow the instruction below for wireless
1.Login in to the router - > wireless settings

2.Configure your wireless using SSID and WEP and save settings

3.Laptop : Using windows wireless client configure the client using the same SSID ,WEP as configured in the router(view available wireless network in wireless properties)

(by default OEM wirelesss client takes over the wireless configuration in branded pc.to disable it and use windows wireless client..control panel ->administrative tools -> services -> enabl2 wireless zero configuration)

14.after all configuration shut the desktop,laptop,router,mdm and pwr them in seq..first modem and then router and then your desktop or laptop

Cheers !!!

Feb 24, 2008 | Belkin (F5D7231-4) Wireless Router

2 Answers

Setup asistant will not work with Belkin wireless router & computer


Hi,
Try the manual method.connect router to pc with ethernet cable
1.logon to 192.168.0.1
2.Connection type ; PPPOE
3.type in your username@ISp and pass
4.Save settings
5.Configure wireless setting(SSID,Wep)
Configure pc with the same SSID and WEP
uplug the ethernet cable and check if your are able t connect wireless

if you still have issue use this guide

Cheers !!!

Feb 23, 2008 | Belkin (F5D7230-4) Router (587009)

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...