Question about Hoover Floormate H3000 Upright Wet/Dry Vacuum

1 Answer

Water not being despenced from water tank

Floor mate h3000

Posted by on

  • Anonymous Sep 07, 2008

    Water is not being dispensed from my Hoover H3000. I took the valve off that sits just below the water tank and that is fine. Water flows through it freely. The blockage appears to be at the bottom of the tube, but I haven't figured out yet how to take that part of the machine apart.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Don't try it's a huge pain. Put very hot water into the tank and hold the handle switch and bang it gently on the ground. You can also blow into the valve assy while holdind the handle switch open. Also, you can spray CRL onto the blue bar the brushes lock into. The little holes are where the solution comes out of. Good luck.

Kirk Thompson
San Juan,PR

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I turned the rainbow but there wasn't any water or shampoo coming out


Genuine Rainbow Aqua Mate Ii Solution Tank Manufacturer

www.sears.com/search=genuine%20rainbow%20aqua%20mate%20...

Sears"genuine rainbow aqua mate ii solution tank manufacturer" .... Hoover FloorMate Clean Water Solution Tank for all H3000 series Models, Part (59177076).

Jan 16, 2016 | Rainbow Genuine Water Tank Cap for...

1 Answer

Hoover floor mate h3000 will not suction water from floor when cleaning


Your collection canister may not be positioned tight enough in its place ment site. Tip machine back using foot pedal (as if you were going tio start using machine to clean) Insert collection canister (bottom container, then insert top canister with solution. The two canisters must be flush with machine side seams and must sit in position tightly. This is sometimes very tricky and may take a little elbow grease to make it click into place. Hope this helps

Jul 08, 2015 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Hoover floor mate sucks up water while in the wash position


They do that. They pickup the water in all stages but lower the squeegee to different heights. At no point does the suction turn off.

Jan 20, 2013 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

How can I get a Manual for the Hoover H3000 Floor Mate Hard Floor Cleanere?


You can download it in a PDF form directly from the manufacturer's website:
http://www.hoover.com/pdfs/manuals/H3000.pdf
You will require Adobe Reader in order to view the PDF document. If you do not have Adobe Reader, you can download it for free from Adobe's website:
http://get.adobe.com/reader/

Apr 02, 2011 | Hoover Floormate H3000 Upright Wet/Dry...

2 Answers

Hoover floor mate is not sucking up water, why?


First make sure that you are getting suction from the bottom of the machine. Most of the time the squeegee is worn out which does not allow it to pick up the water like it use to. Turn over the machine and inspect the squeegee. If it looks worn or bent then it may be time to replace it. You may also consider replacing the filter. These are the two most common parts that wear out.

here is a link the parts for your a h3000 floormate

H3000 Parts

http://www.usavacuum.com/category-s/85.htm


Feb 23, 2010 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Unable to find recomended cleaner for floor mate, what can I use


Do NOT use ammonia...it will destroy the seals. #1 NEVER leave solution in the tank...and clean everything after every use. Lowe's and/or Home Depot have Bissels cleaner for the Hoover Floormate...also check Target and Walmart's sweeper dept. If ALL fails, you may use Zep Pine Cleaner (Home Depot) in a diluted 2oz. to 1qt. water...filling ONLY the little reservoir with this dilution!!!!! Good Luck.

Dec 28, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

My floor mate won't spray out any of the cleaning solution. I took it apart to check for plugs but couldn't see any blockage


sometimes the nozzle holes get plugged above the brushes. if you remove the solution tank you will see where the trigger rod connect to the resevoir to release solution. also you should see that a small amount of solution in the top of the resevoir if no water then the resevoir needs replacement and you are not gettingn the plunger pushed up far enouhg to release solution.

Oct 20, 2009 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

Floor mate


There is a little post in the back where you insert the top solution/water tank, if you put the tank in incorrectly, (i.e., shoved it in, instead of putting it in at an angle, bottom first) there is a chance you broke it or bent it backwards. My mother broke mine, i've got the post but don't know the part, without that post inserted into the tank the water will not come out.

Nov 06, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

1 Answer

I just bought a hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the brissles at all. Help please. It is brand new. any ideas???


http://geeksquad.fixya.com/ThreadView.aspx?prdid=40471&thid=603805
I just bought a Hoover
Posted by serdmann4 on May 17, 2008
I just bought a Hoover floor mate for hard floors. The problem is the water with cleaner is not coming down to the bristles at all. Help please. It is brand new. Any ideas???

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover Floormate H3000 Upright Wet/Dry Vacuum. You can down load the owner manual from the Hoover website www.hoover.com . It looks like the one of the holding or recovery tanks my not be in place, leaking, cracked or damaged, or the clear tube is leaking and needs replacing. I looked 2 the owner’s manual and it does not show the clear tube but the vacuum does come apart and just back track the clear tube and mark the screws when you disassemble the unit. Other wise , please call the factory or a local Hoover warranty station in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. - 7 p.m. EST

Thanks, Don the Vac Man
Go Ahead. Use Us.

May 17, 2008 | Hoover Floormate H3000 Upright Wet/Dry...

Not finding what you are looking for?
Hoover Floormate H3000 Upright Wet/Dry Vacuum Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Roger Potts

Level 3 Expert

694 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...