Question about Projection Televisions

1 Answer

Printer spooler problem error 0x00006ba - Projection Televisions

Posted by on

  • Anonymous Mar 30, 2009

    I try to print/clear printer cue/ or do anything involving the sprinter and it tells me to restart the spoolers of the machine, I keep restarting the machine and it continues to give me this error: error 0x00006ba

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Printer spooler error 0x00006Ba

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung printer/copier toner doesn't bond very well to paper. Toner is on the edges of the paper too.


It would seem that your fuser is faulty in the printer. Odd that the printer is not reporting a low temperature error maybe the Samsungs don't check the temperature.

Depending on the value of the printer it may not be a good idea to replace the fuser, it might be hard to find a replacement. If this printer is worth less than $200 new, I would say replace the printer, the fuser would likely cost more.

Oct 27, 2008 | Projection Televisions

6 Answers

On my Brother MFC410CN Printer Message reads Unable to clean I have followed TroubleShooting instrctions and it still appears


MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C
Press the Menu/Set, Black Start, Menu/Set, and Black Start keys in this order.TIP: For the FAX models equipped with numerical keypads, you may press the Menu/Set, Black Start, and 0 keys instead in the same way as conventional models.Then "MAINTENANCE 10" appears on the LCD. Press 82 using the numerical keys/arrows.
Then press the Menu/Set key.
Error code will display indicating source of error if it is 41 thats print head error,
replace machine.

press stop to exit if needed.
(http://www.fixya.com/support/t250171-brother_mfc_215c_unable_clean)

Oct 06, 2008 | Projection Televisions

1 Answer

Lex. x 5495 won't print from pc.It worked up to a short time ago.Will print from laptop.Driver,cables. connections are good, occosionally will print a remaining document from previous attempts first thing...


check all this possible problems and solutions:

-Check the printer status lights, or the status LCD screen. If there's a flashing light, or if the status screen shows an error, then it's your first clue to a problem. Most printer manuals have a diagnosis process for alerts.

-
common problems are related to toner or toner cartridges. If the problem is toner-related, check to see if the toner cartridge is empty or low. The printer warning should indicate this. Swap it for a new one and the unit should work.

-
check to be sure that it is connected to your computer. Personal printers connect via either a parallel or USB (universal serial bus) connector to the back of the printer. Follow the cable from the back of the printer to the back of the computer to make sure the connection is good.

-
When a printer acts up and there is no hardware problem, the solution is often driver-related. A printer driver is a piece of software that allows a computer to "talk" to a printer. It's a kind of translator. Occasionally, if a printer has worked previously, but suddenly doesn’t work with a newly installed program, there could be driver problems. To remedy this, download a driver from the printer maker's website, remove the old driver, and install the new driver. Drivers are normally available under the "support" area of a website.


Sep 16, 2008 | Projection Televisions

1 Answer

My Dellâ„¢ Laser Multi-Function Printer 1815dn problem is that it says scanner locked unlock scanner


Power the printer off!
To unlock scanner look in the paper output tray on the "roof" of the tray to the left. You will see a light blue slide switch. Slide this towards the front of the printer. It needs a firm tug.
Power the printer back on. The error should be clear.

Aug 01, 2008 | Projection Televisions

1 Answer

Printer error message from start up on a HP Officejet 9110


ink might be low,if not go to my computer,right click then click properties,hardware,device manager,action,then click scan for hardware device

Jul 29, 2008 | Projection Televisions

1 Answer

Apple error 9672


Are you still interested in discovering the solution to the problem of airport extreme base stations producing an "error 9672" when connecting to printers that have successfully connected in the past? If so you might be interested my platinum uber premium plan with a 30 day trial and money back guarantee. Click NEXT for more details....

Jul 08, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

2,135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...