Question about Standard (CRT) Televisions

1 Answer

Codes for aiwa

My tv is a Aiwa,model;A2110,the remote control is RC-ZVT04,is broken & i have just bought a china made universal controller,after keying all those codes provided by the manual still unoperational,please help.TQ

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The code is " 009 ". or you can manually searching code by pressing button " set " together with " tv ". then red light appear. Press button volume continually until "volume level came out". then press button set again. Now your universal remote should be ok.

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C1421 aiwa tv codes


2690,2640,2651.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Aug 13, 2014 | Aiwa Standard (CRT) Televisions

1 Answer

Aiwa tv c202ske


If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. You should first make sure about the number of digits in the codes to your device have. There are 3-digit, 4-digit, 5-digit and even 2-digit codes. This detail can be get with the code list attached to every universal remote control. The brand name of the remote control you select isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. Check out, which brand remote control has setup codes to your TV/Device brand. Setup code list & setup procedure to some popular brand remote controls are given. Check it, and determine which brand remote control should be bought, and buy that brand remote control, according to availability.
If you wish to get more details, check the sites linked here. Set-up code list, and Set-up procedure to many popular brand remote controls are given.
http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the drop-down list, by the top left of the display window, will make surf easy.

Nov 03, 2013 | Standard (CRT) Televisions

3 Answers

Tv error codes


This problem has been answerd a few while ago.

May 17, 2013 | Aiwa Standard (CRT) Televisions

1 Answer

REMOTE CONTROL NOT WORKING


Check the remote control for its infrared emission first. Check it with fresh batteries. If you wish to get details about how to check and repair a remote control, check this link. The link also provide details to some popular model remote controls too. There is setup code list, and setup proceedings. Pull up doodler posts there. You can get details about setup codes that match to Aiwa TVs. Can choose the exact model of remote control that works with your TV.

Mar 01, 2013 | Standard (CRT) Televisions

1 Answer

Need to find code for Jumbo Universal Remote to use with Aiwa S2011 MTS television. Thanks for any help!


Hello
Aiwa TV is not lited on Jumbo Universal Remote codes. Anyway try out with these codes. Sometimes may help you.

Three digit codes for Aiwa TV with universal remote are:
195/ 196

Four digit codes for Aiwa TV with universal remote are:
0195 0196 0227 0269

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

NOTE: Switch OFF and switch ON your TV with its FRONT PANEL POWER ON-OFF SWITCH each time before trying an other code.
OK

Jan 27, 2011 | Aiwa TV-S2011 20"

5 Answers

Aiwa TV MODEL No. TV-A149 AGING


I have Aiwa TV MODEL No. TV-A149
The problem that I am suddenly facing is that I can't change channels or volume or use any other function. I can't even turn it off with remote control.

Its stuck randomly on a particular channel that I was watching at that point of time.

Along with that channel it now shows a message in flashing red color that reads :-
AGING
6EDEH

Now when I press ''Display'' button on remote control volume goes off and this code is shown :-
S123 K234 Y
100 000 0


The numbers in the second line can be navigated by ''CH+'' button and changed between 0 and 1 by ''Vol+'' button.

I really don't know anything about this. So, please help me out of this problem.

Sep 14, 2009 | Aiwa TV-S2011 20"

7 Answers

AIWA TV-A2119 PROBLEM: SOUND MENU NOT COMING


THE PROBLEM IS YOUR TV MODE HAS BEEN RECONFIGURED TO KE1 MODEL. SO YOU WILL NOT GET THE AUDIO MENU. THE SOLUTION IS, JUST BUY AN ANOTHER REMOTE RC-ZVT03 MODEL AND USE IT AS A TEST JIG REMOTE. OPEN THE COVER, YOU WILL SEE THE CONTROLLER IC BW7461-3T ( 16 PIN). ACTUALLY TO ENTER IN TO THE SERVICE MODE, WE HAVE TO PRESS THE "TEST" KEY. BUT THAT KEY IS NOT AVAILABLE IN THE REMOTE. SO SIMULATE THE 'TEST' KEY, JUST SHORT THE PIN NO 4 AND PIN NO 12 THROUGH A WIRE TO ENTER IN TO THE "SERVICE MODE". ONCE YOU PRESSED THE PIN 4&12, THE TV WILL ENTER IN TO THE "AGEING MODE". THEN PRESS "AV MODE" SWITCH IN THE ANOTHER REMOTE ( YOUR CASE ZVT13). A MENU WILL APPEAR TO SELECT THE MODE. PRESS NUMERIC KEY "3" (INDA-1) TO SELECT THE "AIWA TV-A2119KE" MODEL AND AGAIN PRESS "AV MODE" TO EXIT. AGAIN PRESS THE TEST KEY TO EXIT. RESTART YOUR TV. NOW YOUR PROBLEM SOVED. SINCE I ALSO FACED THE SAME PROBLEM, I GOT THIS SOLUTION (jp_ati).

Enjoy.

Dr. M. Jayaprakasan, Chennai

Mar 22, 2008 | Aiwa F2000 20" TV

1 Answer

Stand_by


www.remotecodelists.com hope that helps....................T.

Mar 10, 2008 | Standard (CRT) Televisions

2 Answers

Code service aiwa


which on tv on RC press 7293, and put it to standby

Dec 09, 2007 | Aiwa F2000 20" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68352 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...