Question about Symbol PTC 701 Portable Terminal

1 Answer

Ptc-701 my screen is stuck at SO when I turn it on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try these steps to correct the problem...

  1. Turn the Telxon off
  2. Hold down <space>, <enter>, and turn the Telxon on
  3. 42> will display
  4. Hold the 5 key down for three beeps. The unit will go blank for about one minute.
  5. Display will read "MEM OK"
  6. Turn the Telxon off and wait about one minute
  7. Turn the Telxon back on
  8. 42> will display again
  9. Press the 6 key on the Telxon
  10. "TP_" will display
  11. Press 58 and then <enter>
  12. Hold the 3 key down for three beeps

Posted on Oct 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Backup batter fault 710


These old Telxon devices had a switch in the battery compartment to disable the backup battery for storage, power off the unit then change the switches position and try again.

If you still have the problem the unit will need a new backup battery fitting. The unit will need to be opened and a new cell soldered onto the mainboard.

If you really get stuck contact:

www.portablesolutions.com

Oct 12, 2013 | Symbol PTC 701 Portable Terminal

1 Answer

How do I get rid of code 61


Does this look like "61>" on the screen? this is probably the Tcal prompt which means it is waiting for you to load an application (61 is the Tcal version)

www.portablesolutions.com

Jan 13, 2013 | Symbol PTC 701 Portable Terminal

1 Answer

Test data area appears on screen


Turn off the 710, three key the device (bottom left/right button - No & enter key on my device) this will boot into a DOS/Tcal prompt so you may load your application.

Jan 02, 2013 | Symbol PTC 701 Portable Terminal

1 Answer

My telxon 710 will not turn on


Try to "three key" the device. Hold the bottom left and right key (No & Enter button on my device) and whilst holding press the power button. This will boot into DOS/Tcal prompt. Also check the battery contacts and ensure the battery is well charged.

www.portablesolutions.com

Nov 17, 2012 | Symbol PTC 701 Portable Terminal

1 Answer

My telzon ptc710 will not turn on


Three key the device (bottom left/right button - No & enter key on my device) this will boot into a DOS/Tcal prompt. Also ensure the battery contacts are in good clean order and the battery is fully charged.

www.portablesolutions.com

Nov 17, 2012 | Symbol PTC 701 Portable Terminal

1 Answer

Backup battery fault error on ptc 710


These old Telxon devices had a switch in the battery compartment to disable the backup battery for storage, power off the unit then change the switches position and try again.

If you still have the problem the unit will need a new backup battery fitting. The unit will need to be opened and a new cell soldered onto the mainboard.

If you really get stuck contact:

www.portablesolutions.com

Nov 30, 2011 | Symbol PTC 701 Portable Terminal

1 Answer

Hey i got symbol ptc 710. its got error 67>. how can i fix that


That is probably not an error, these devices use an operating system called Tcal, 67 is the version. The device is ready to load applications.

Jul 17, 2011 | Symbol PTC 701 Portable Terminal

1 Answer

Hi, I get an error message on my telxon PTC-710 - i.e 68> when switch on. Please advise. Thanks


Hold the 5 key down for three beeps. This should clear the memory and return you to your software application.

Sep 20, 2010 | Symbol PTC 701 Portable Terminal

2 Answers

PTC-701 Memory


http://www.barcodetrader.com/telxon-ptc-610.html

They seem to deal alot of these, maybe they have what you need.

Jan 12, 2009 | Symbol PTC 701 Portable Terminal

3 Answers

Telxon 701


for the one that has the 42 prompt.

hit the 6 key
TP__ will show
type in 59 then hit enter
hold the 3 key for 3 beeps
turn the device on

800-933-2839 x240

May 01, 2007 | Symbol PTC 701 Portable Terminal

Not finding what you are looking for?
Symbol PTC 701 Portable Terminal Logo

Related Topics:

715 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Computers & Internet Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

pkwc

Level 2 Expert

254 Answers

volk1

Level 1 Expert

20 Answers

Are you a Symbol Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...