Question about Panasonic PT-47WX53 47" Rear Projection HDTV

1 Answer

Help follow-up T, dont' know if you saw my followup message, but wanted to make sure...I had a question you answered earlier today about the panasonic pt47wx53 where you recomended I get new/better parts to replace the IC's and resistors. Do you have any recomendation on which parts I should use for the IC's and the resistors, or is there a kit I should purchase? Also, which resistors that are around the IC's should I investigate for replacement? Again, thanks for any help you can further add...

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Scott737,
There is no kit for your repair.If your original IC's = STK392-110...
quality Sanyo-made will cost you $14.00 - $16.00 each.If you buy Panasonic packaged IC's,the part # is C5AA00000203 and they cost about $30.00 each. Use an ohm meter,your eyes and nose to locate burned resistor(s).Usually one or two 6.8 ohm
1 watt light blue color a total of twelve, I think.....However,your next step is to order / purchase first grade IC's = Panasonic is going to be your best choice.........and some 6.8 ohm 1 watt
resistors.....

Terry.

Posted on Aug 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set up my mail box on a Panasonic KX-T7633?


never saw an answering machine that you have to setup. people call and leave messages .

Feb 09, 2015 | Panasonic KX-T7633 Corded Phone

2 Answers

Todays answers


Today's answers for what? Do you want an anagram for 'rujor'? If so, try 'juror'.

Nov 25, 2013 | Lands Phones

1 Answer

Problem with Panasonic NV-DS38 Mini DV Digital


I´ve had same trouble, nothing help me to get tape on, then I tried to recharge the battery (new spare battery, only had 2 earlier charge) and voilá, it work´s again. So there was somekind of trouble with the new battery I got, that is not original part I don´t know if that matters,

Nov 06, 2009 | Panasonic NV-DS38 Mini DV Digital...

1 Answer

How do I retrieve messages on the Panasonic KX-T7030 phone?


  • Call into your mailbox (usually by dialing intercom 165)
  • Press 4, and 4 again (for "Incomplete call handling")
    By default, three options are enabled:
    option #1: leave a message
    options #5: call the operator
    option #6: return to top menu
  • Follow the audible prompts to disable options 5 and 6

Here are some other features you may need

  • Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.
  • Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail
  • Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.
  • Use Absent Messages to show text messages on other people's phones when you are away.
  • Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.
  • Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.
  • Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.
  • If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).
  • Dial 330 to make an announcement to all phones.
  • If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM
  • Feb 12, 2009 | Panasonic KX-T7030 Corded Phone

    1 Answer

    Lost manual for phone KX-TCD420ES , cannot retrieve messages


    Press INT (Bottom right black button) then # then follow instructions. Press 4 for new messages and 5 for all messages.
    To turn answer machine on and off – press INT, #, 0 to turn it off and INT, #,8 to turn it on.

    My question is how to change answer machine message, any ideas?

    Jan 01, 2009 | Panasonic Lands Phones

    1 Answer

    Panasonic KX-TG2356 Answering Machine Problem


    your message is set for 3 second delay and no record of messages i dont know particular system you use but you gotta go threw your book and set the settings to a 30 second message and 1 minute message from peeps
    i had the same problem like this before with my uniden

    Oct 30, 2008 | Panasonic KX-TG2356 Cordless Phone

    1 Answer

    I need to know how to retrieve messages from this phone From another number


    1.Call from a touchtone phone.
    2.During greeting message, enter your remote code. (Code is "11" by default, or you can set your own beforehand via Menu>Initial setting>Set answering>Remote code>enter your desired 2 digit number)
    3. Unit will announce number of new messages, and play them back.
    4.After 3 seconds, voice guidance will start; follow as necessary.

    Bypass voice prompt by pressing:
    1 Repeat message (during playback)
    2 Skip message (during playback)
    4 Play new messages
    5 Play all messages
    9 Stop (to resume, enter a command w/in 15 sec, or voice prompt resumes)
    0 Turn answering system off
    *4 Erase this message (during playback)
    *5 Erase all messages
    If answering system is off, you can force it back on by calling and letting phone ring 15 times.
    Good luck. Hope this helps!

    Apr 04, 2008 | Panasonic GigaRange KX-TG2432 Cordless...

    Not finding what you are looking for?
    Panasonic PT-47WX53 47" Rear Projection HDTV Logo

    Related Topics:

    33 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Televison & Video Experts

     Grubhead
    Grubhead

    Level 3 Expert

    5699 Answers

    Demonic-2011
    Demonic-2011

    Level 3 Expert

    512 Answers

    The Knight
    The Knight

    Level 3 Expert

    76140 Answers

    Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...