Question about HP PhotoSmart 7660 InkJet Printer

2 Answers

Red light I get a blinking red light on the power button and no response to anything. I unplegged and replugged cord and get a blinking green light for a couple of seconds but then right back to blinking red. Please help. Thank you.

Posted by on

  • 1 more comment 
  • barbidol73 Aug 24, 2008

    I am having the same problem. The LED display is gone and the red power button just keeps blinking.

  • Adrian_Con Sep 23, 2008

    I am having a problem with my HP Photosmart 7660 Printer. The red light on the power button keeps on blinking. Ihave check already the cartridge but its ok. There is no paper jam also. I have try to turn it off for 30 min and swtich it On again but still the same. It is not showing any error message but the printer does not responding. Can you please help me regarding this problem. my email is adrianconception@yahoo.com Tnx!

  • 5039 Oct 05, 2008

    Power led flickers constantly. Reinstalled software from HP, still occurs.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is no solution. I have the same printer, with the identical issue and had an HP tech troubleshoot it for me. It's headed to the garbage as we speak.

Posted on Sep 13, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 162 Answers

Logic Error in printer

Posted on Aug 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ml-2165w laser black printer, when try to print it tells me me disconnect and press on button, the light turns green then blicks then turns red. What do I do>


Dear
There may be some error related to fuser or LSU.
Pl. down load samsung easy printer manager from samsung site or it can found on the disk provided.
run it it show the error detail.
Thanks

Oct 06, 2014 | Samsung ml-2165w - laser printer -...

1 Answer

Display not showing anything but the cord has a green light inside cube protector and red light under copier deck and lid


Try to unplug the power adapter from the printer.
printmastert_39.jpg

Wait at least 10 sec before replugging the adapter. This will give enough time for the printer to reset itself. Also, make sure the printer is plugged in straight to the power outlet in the wall and bypass any power surge protectors.

Apr 25, 2011 | Lexmark X5495 Printer

1 Answer

Prints multiple copies of job and will not shut off or stop printing


Unplug the power cord from the printer. Hold down the red "X" button. Plug the power cord back in while holding down this button. Release the button. Should see flashing red and green lights. Unplug the power cord again. Replug. Should be reset.

Apr 10, 2011 | Dell 1100 Laser Printer

1 Answer

On off light blinkinking from green to red and I


Canon IP3000 INK counter reset
Can gave it a go may work

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Dec 14, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Green light blinking, won't turn off and can't print anything


unplug your usb or any cord that links to your printer...
then press and hold the power button of your printer (it should force your printer to shutdown)

then plug-in your usb cord (connector/cable) back to your computer then turn in you printer again... wait for your computer to recognize it

(note the green light blinking is an indication that the printer is busy) therefore you should wait for it to be recognize (note: a sound maybe heard once your computer recognize it, some may appear as pop-up)

it should be ok now make sure you still have ink in your cartridge

Jul 07, 2009 | Lexmark X2470 All-In-One InkJet Printer

1 Answer

CANON I960 BLINKING RED LIGHT 2TIMES


is the piece of paper removed? or there parts of the paper w/c was nt removed? if the whole paper was removed already, try to use this steps..step 1. remove the power cord of the printer. step 2. press the power on/off of the printer while plugging the power cord. and wait for 10 seconds before releasing the on/off button..then put on your printer. but if some pieces of broken paper inside the printer try to clear it first then try printing.

Jan 02, 2009 | Canon I960 InkJet Photo Printer

2 Answers

Despite being plugged in and the green LED light on, no display on printer


I have the same model (about a year old) but there are no lights visible on the back of my printer (neither red or green). Have you contacted the Lexmark tech advice website about this problem? They may take a few days to respond but there are numerous possibilities in trying to locate the fault (probably in the power circuitry) and it might have to take it to a repair shop to get it tested (if it is not under warranty).

Sep 09, 2008 | Lexmark X5470 All-In-One InkJet Printer

1 Answer

Blinking red light


Red Light blinks when the ink cartridge is bad..
to check which one is bad..
take out all cartridges from the printer and clean the copper contact and the inner area of the cartridge slot with a lint-free cloth...
power off the printer and unplug the power cable from the printer..
press & hold the power button on the printer for 60 seconds..
connect the power cable and power on the printer..
insert any ONE cartridge and close the door..
similarly insert other cartridges one by one and close the door and check if the light blinks..
if it blinks ..it means the respective cartridge is bad and replace it..
if u have replaced all the cartridge..it might be possible that the cartridge sensor inside the printer have gone bad..
if this is the case so ..u might service the printer..
but I will suggest to go for a new printer as 7660 is quite an lod printer which hp launched in 2004 or 2005..
even if u have juz bought it ..it will be refurbished one..

Aug 12, 2008 | HP PhotoSmart 7660 InkJet Printer

1 Answer

Offline and blinking lights


A couple suggestions. Unplug the usb cable from the pc to the printer, make sure there is no paper jammed in the machine, unplug the machine from the wall and see if you can move the print head left to right freely. If nothing is obstructing it plig the power cord in with out the usb cord plugged in. See if the machine goes to ready. If all of these fail, that means the main board has been damaged by a power surge, and it would be cheaper to replace the machine than repair it. Good luck!

Jun 28, 2007 | Dell 942 All-In-One InkJet Printer

Not finding what you are looking for?
HP PhotoSmart 7660 InkJet Printer Logo

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96333 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...