CAN MY HP 4400 BE TURNED ON WITH THE MOUSE JUST BY CLICKING PRINT?

I have had the same problem with my Logitech wireless optical mouse and it has always been an indicator that my mouse's battery is low or almost depleted. If you have a fresh battery and it is still behaving the same way then the contacts under your "left click button" could be wearing down or malfunctioning. Also there are some basic mouse control settings found under START-->Control Panel -->Hardware and sound-->devices and printers-->Mouse

I’m happy to help further over the phone at https://www.6ya.com/expert/anthony_db0df2be5e6f8c0c

The problem is with the PC and not with the mouse. The solution depends upon the installed driver in the PC for mouse (like intel etc).

Hello,

YOu could try deleting it from the registry entry.. Before you do any changes in the registry first take a back.

Step 1) Start->run(or win+r)->type "regedit" and hit enter. -> Click on file and click export-> now type any name you want and make sure you select "all" instead of this branch(at the bottom left of the screen)-> ok

Step 2) Expand HKey_LOCAL_MACHINES ->Expand softwares -> delete the HP 4400 folder. and restart your computer and check.

(Note: if you delete some wrong key or wrong folder you can always restore the back up by clicking on file->import and select the file.)

Hope this helped.

Hello; It has to be a button you might have pressed near the mousepad on the notebook. Try clicking that button again, the red light will go off.

put your finger in your colon and feel around for an answer...you should find one.

Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Install the driver disk that came with it on your computer. Then connect the printer. Try to open something and print it - you may have to select HP 4400 printer - after going to file > Print. But that is the long and short of it.

I recommend going to HP.com and downloading the 4400 printer driver from their website however. It is often a newer updated version than the one that comes with the printer on the CD.

It seems that your scanner is not supported in Vista.

You are going to get a new one or downgrade to XP.


Good luck

• i had the same problem, uninstall and download drivers from hp website
• http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=.-47979-2&lc=en&cc=us&lang=en&os=228&product=3177562&dlc=en
• then reinstall
• worked for me, (had to delete from registry too cause the stupid thing wouldnt delete itself)
• good luck

DID YOU TRY SWITCHING YOUR BUTTON ASSIGHNMENT (LOCATED IN MOUSE OPTIONS IN CONTROL PANEL) TO SEE IF IT HAPPENS ON BOTH RIGHT AND LEFT BUTTONS??? ALSO MAKE SURE YOUR SENDING UNIT IS NO FARTHER THAN A COUPLE FEET FROM YOUR MOUSE.