Need Help how to setup HD on sansui HDLCDWB - Sansui HDLCD-1900 19 in. LCD Television

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Setup codes with Sansui Brand are 038,024,029,031,045. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given. Check out and see, which brand universal remote have setup codes to your TV, and buy that one according to availability.

To buy one universal remote control, you have to check which remote control have setup codes to Sansui brand TVs. 0183,0481,0924,0825 are the common codes used with Sansui brands. If you wish to get more setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts. Setup code list and setup instructions to some popular model remote controls are given. The site linked here will surely help you to select the proper brand universal remote control.

Big Button BW-1220US have setup code for Sansui. If you want more details check these links. There is setup codes and procedure to many remote controls. Check them, and choose one remote control, which have setup codes to Sansui. Sometimes, the above said brand remote control cannot be available to your area.

Hello
Three digit universal remote codes for Sansui are:-
135/ 136
Four digit universal remote code for Sansui are:-
0135 0310

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

OK.

if its a hd setup programming not broadcast in HD but viewed on a HD channel will be letterboxed of sorts

howto get the hdmi signal thro hdmi to dvi cable in plasma pdp42 sansui tv in dvi input

The DTV2784 has a SDTV tuner and is ready to receive digital broadcasts, but it is not HD(high definition).

No this TV is not HD ready. However it is digital (ATSC) ready meaning now that most of the analog brodcasts have stopped it will receive the digital broadcasts so you don't need a converter box. Since it can only display 480i resolution it is not HD ready. You would need a TV that can display 720p or better to be considered HD ready.

Today, after speaking to the Sansui Manufacturer representative from Japan. He stated that all you need to do is to turn off the closed caption from the TV remote and not the DVR remote. Black screen can occur at the top half or the bottom half of the screen depending on how it was originally setup during installation. Try this and hopefully this fixes the problem.