Question about Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

3 Answers

DOWNLOADED PROGRAMS THAT WORKED FINE FOR YEARS NOW DONT

Im starting to think i might be having a serious problem with my PC.. what i thought was a problem with the poker software i was having im now starting to think is a PC problem... intertops poker software that ran perfectly fine for years now when i click on the software on my desktop to load it loads the lobby fine but once i try and open a table i get the error message "MPP.Poker.exe has encountered a problem and needs to close. We are sorry for the inconvenience."... and once i click "send the report" or "dont send the report" the client closes completely... it almost looks like the table window is actually loading somehwere but it never shows... just like a pop up window that gets blocked by a pop up... the spot on the task bar for the room is even clickable but whenever you click on it no broswer window for the table pops up... this started about 5 days ago after it had been working fine during the day and then all of a sudden hasnt stopped since... i have no idea what all the info inside of the error report means but im thinking maybe one of you might... the first couple lines say

Exception Information

Code: 0xc000005 Flags: 0x00000000
Record: 0x00000000000000 Address: 0x0000000070902dad



ofcourse this Microsoft eror isnt listed under any of the error messages on the Microsoft problem solving page... it probably hasnt been sent to them enough times to be studied... i re installed the software... cleared my cookies and cache... defragmented my files and all that and still the same thing... but after that i did get the flash version of the software that the poker site has on their website to finally work... it didnt at first it would say "no connection to the lobby can be made"... but the flash version is an extremely poor version of the normal download version and now i have problems with freezes and boots and no feature options... i rather not use it if i dont have to

when i wrote the poker site they said its a microsoft error and not theirs... makes sense since the microsoft error warning keeps popping up

anyway i just figured it was a problem just with that software but now today the same thing is happening with ANOTHER poker software i have downloaded on my pc thats worked fine for years... this browser acts differently from intertops theres no pop up browsers to open tables on this software.. everything sits inside one browser and you click on tabs to change tables.. the error i keep getting with this is "no connection" made when my computer is obviously working fine everywhere else... i am connected.. when i log off and reload the walmart connect ISP ( lol dont laugh its an extremely great bargain i pay only $7 a month for internet access and its super fast for dial up.. started off 9.95 and loyal customer made it $7 ) ... anyway after logging off and dialing back online it then finally connects but never automically logs me in like its suppose to and always did so it just sits there never opening up the lobby and the "launching" light just keeps going back and forth but never does launch the poker client... UGHHH!! whats going on with my computer anybody know what it could be??... im starting to think my now 3 year old PC might be starting to give me problems... or maybe somethings damaged like a file or something i dont know somebody help if u can... everything else works fine on my computer for now anyway


heres my computer info


Client Configuration
Browser IE
Version 6
Majorver 6
Minorver 0
Platform WinXP
Supports frames True
Supports tables True
Supports cookies True
Supports JavaScript True
AOL False
IP 64.12.117.198
SSL No
Browser Summary Mozilla/4.0 (compatible; MSIE 6.0; CS 2000 6.0; NS Connect 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; PeoplePal 6.6)
Language en-us

WriteHealthCheck();Dynamic Tests
JavaScript Enabled
Browser Microsoft Internet Explorer
Version 6.0
Platform Windows
Color Depth 32-bit (true color)

ScreenResolution 1024 × 768 pixels
Available Window Resolution 1024 × 734 pixels
Current Window Size 859 × 545 pixels
Summary Mozilla/4.0 (compatible; MSIE 6.0; CS 2000 6.0; NS Connect 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; PeoplePal 6.6)
Flash Installed
Cookies Enabled
System Language en-us
User Language en-us
CPU x86

Posted by on

  • ejipny Aug 14, 2008

    yea i did try the scan discs n nothing came up.. it scanned for about 40 minutes and just closed no message or nothing so i guess everything was ok

  • ejipny Aug 14, 2008

    yea i did try the scan discs n nothing came up.. it scanned for about 40 minutes and then just closed so i guess its ok

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Am having intel processor ,pentium4,3ghz is not showing on the screen. l change with lntel processor ,pentiun 4, 2 ghz it show on the screen but restart it self never show on the screen.

Posted on Oct 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try using the an application called regcure!!
easy do search over google.. its a certified one from microsoft.
just scans your registry entries and other important locations and also fixes the errors..
see if this one can solve your problem

Posted on Oct 16, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 730 Answers

It seems like a windows problem try scanning disk to fix any system errors as if there are mucked up they cause confusing stoppages etc.

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost my password hdd wd 500gb. Is there a way to reformat it and take my lumps?


go to the wester digital website, download the appropriate data lifeguard tools for your drive and burn the program to disc. The website will give you directions to erase data by writing zeros to all sectors, thus wiping it ready or use.
Good Lick

Tt is a very straightforward procedure

Mar 10, 2015 | Western Digital WDBAAU5000EBK - 500 GB USB...

1 Answer

My pc 2500k with 3.30 ghz and motherboard intel DH67CL but works slow


The symptom you describe is too vague, but you can try the following tune-up procedures. First, download and install and run Malwarebytes free version. This will root out any bad stuff/malware/virus. Next, download and install the excellent free utility program called CCleaner from Majorgeeks.com or Download.CNET.com. Run CCleaner to remove tons of junk files that may be slowing your computer. Next, if you have a regular spinning hard drive, run Defragmenter in Windows. Be patient with all of these tune-ups i've mentioned - they may take a while! Next, if your computer has less than 4GB of RAM memory consider adding more memory. Finally, give your system a serious speed boost by adding an SSD (solid state drive). These days you can buy a 240GB SSD for as little as $89 or a 120GB SSD for around $69. Use free software from the SSD maker's website to "clone" your tuned-up Windows onto the new SSD. Keep the old drive for storing data or for installing programs that you don't use often or that won't fit onto the SSD. Then prepare to be amazed at how responsive your system is.

May 17, 2014 | Intel Core i5 Processor i5760 8MB LGA1156...

1 Answer

How to fix black screen in windows 7


Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". When it's finished loading up, go online and download and install the latest drivers for your video card/chip.

If that doesn't fix it you might have some viruses and malware.

Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". Now get some or ALL of the FREE programs below.

Download, Install and Run Malwarebytes Anti-Malware:
http://majorgeeks.com/download.php?det=5756
When Installing choose the non-pro version.

Download, Unzip, Install and Run TDSSKiller:
http://majorgeeks.com/Kaspersky_TDSSKiller_d6895.html

Download, Install and Run Super Anti-Spyware:
http://majorgeeks.com/SUPERAntiSpyware_d5116.html

If you have an outdated Anti-virus program then Download, Install and Run Avira Anti-Virus:
http://majorgeeks.com/Avira_AntiVir_Personal_-_FREE_Antivirus_d955.html
Make sure to select ALL of the "threat categories" when you install or configure Avira.

You should be in pretty good shape if you run and install all of these programs.

Aug 13, 2012 | eMachines E Machines E627 Laptop Computers

1 Answer

I had a guy build me a PC. It worked fine until I re-installed WIN XP Pro which reformatted my hard drive and lost my connectiions settings and drivers for Comcast cable modem. I picked up the Comcast Hi...


first you dont need to send money just do these steps,if in device manager is in yelow that means that you do not have instaled the proper drivers for them you should search for drivers and simply reinstal or if you have the cd with put it in the drive and go in device manager then click update driver.

Dec 09, 2009 | AMD Athlon 64 X2 3800+ Dual Core Processor...

2 Answers

Cannot download from internet . Also gone is my audio and toolbar; nothing happens when I click on Internet Options in my programs folder. Also have weird icons at the bottom of my pc. a calendar with a...


Sounds as if you should scan your computer with an anti virus and an app to find malware such as spybot search and destroy
If you go into "Safe Mode" are these icons still there? If not maybe you can uninstall these items.

Nov 05, 2009 | Computer Processors

1 Answer

My pc is very starting up very slow


Spyware Adware etc and any program you have starting with the pc can cause this issue. Also fragmentation of hd can be part of the cause as well.

I recommend downloading Ad-aware and spybot search and destroy. Make sure the Ad-aware you download is from lavasoft. Also go to my computer classic view then right click on your C:\ go to properties and run defrag software. Use the defragment now button. Analyze will tell you if the software reccomends you defragment.

Also there is a program called Startupmechanic this will tell you programs that are starting up with your pc as well as if they are good or bad. Although I haven't used it myself in a while check it out. Just do a search on either google or download.com.

You can also go to start menu then click run and type in the following: msconfig. this brings up items that boot with system you can uncheck the ones you know for sure are not need in the startup option portion of msconfig. This can be a messy way of doing it so which is why I reccomended Startup Mechanic. Let me know your results.

Jan 14, 2009 | Computer Processors

2 Answers

AMD Sempron 2600+ (Socket A, 1.83GHz, 256KB L2) suddenly trip OFF


I suggest that your CPU fan and heat sink need cleaning it seems that your computer is overheating

Jul 24, 2008 | AMD Sempron 2600+ / 1.83 GHz ( 333 MHz ) -...

3 Answers

My pc is slow


you dont explain your processor speed 

May 31, 2008 | Intel Celeron 2.4Ghz Socket 478 CPU (...

1 Answer

Former Athlon XP 2600 1919mhz, Now Athlon ...1180mhz, Excuse me??


Hi dont worry, for some reason the FSB speed has been changed in the bios,
to fix it you need to restart the pc, press del or F2 on some machines while on the black screen, a blue bios screen will appear, i think it should be under advanced or cpu settings, varys on different machines, look for one thats CPU FSB probably says 100 or 133, if it says 100 change to 133 if 133 change to 166,
once you have made the change, save and quit
and it will show the correct speed, if you change the settings above what i have suggested you will be overclocking the machine and it might not start up, and you will have to remove bios jumper on motherboard, but just change from 100-133 or 133-166 and you will be fine...

Have a nice christmas

John

Nov 26, 2007 | Intel (RK80532PG0881M) Pentium 4, 3 GHz...

1 Answer

CPU Hung


Hello Wolf, It sounds to me like the processor fan is not working correctly. When you put a load on the processor like programs, movies or games, it overheats and hangs up. Try taking a fan, and with the side removed from your case, have the fan blowing into the case, and try a movie or a game. If it does not hang up, replace the processor cooler and fan. Please let us know how it works for you, and if we can help you in any other way. Best regards, nightdiver

Oct 08, 2006 | Intel Celeron, 1.8 GHz Processor

Not finding what you are looking for?
Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computer Processors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Shafky Khan

Level 2 Expert

85 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Intel Computer Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...