Question about TruTech PLV16190 Television

2 Answers

Power board My TV is dead. No high voltage. Where can I find a replacement power board?

Posted by on

  • Anonymous Aug 13, 2008

    my tv just stop working

  • laclave87 Oct 15, 2008

    my television, alone it fastens the light stanbay, the energy source, I need replacement, where I get it.. in that paginates the I can request. to buy it for internet

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hello, I have the that same problem, alone it fastens the estanbay light and I want to know where I can, to buy the feeding source, I am of sacred Sunday

Posted on Oct 15, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 367 Answers

Open the back of the TV,and look at the can shaped items on the boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!


Tyler

Posted on Sep 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I went to turn on my Samsung a little bit ago, which was working earlier today, and now it won't turn on and is making a clicking noise. The noise does not stop until 10 seconds after I unplug it...


The tv power supply board it got short and already dead some how,tv have clicking noises mean ur tv power supply board are not stable and not regulating high voltages to the rest of the tv other boards.The tv power supply board that the board where the a/c power cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish tv power supply board for the replacement.

Aug 13, 2011 | Samsung LN46A650 46 in. LCD HDTV

1 Answer

No Picture or sound. Power LED blinks steady green.


Hi,

The power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


Hoping this will help to solve the problem, and do take care to handle the set because it contains high voltages...

Aug 08, 2011 | Sharp LC37SB24U 37 in. LCD TV

1 Answer

Tv will not start you have to switch on off at the point for ages then it comes on But now not even that works.


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I hope this will help in solving the problem, and do take care in handling the power stage, because it contain high voltages...

Aug 06, 2011 | Televison & Video

1 Answer

My vizio vp322 hdtv10a was on then just turned off all of a sudden. When i tryd to turn it on the vizio light comes on but the screen is still black.


Hi,

You need to check the output voltages of the power supply to see which one goes off. It may be due to short circuits some where.If otherwise,
Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


I hope this will help to rectify the problem, and do take care in handling the TV, because it contains high voltages...

Jun 24, 2011 | Vizio VP322 32 in. Plasma TV

1 Answer

I WONT TURN ON


Hello,

Common problem with this TV is the power supply module.
Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby +5vdc at the power supply connector, the front red indicator will not be on if you do not have this +5vdc standby voltage due to shorted out transistor and zenerdiode, if otherwise, Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hope that this will help in solving the problem, also do take care in handling the fault, because it contains high voltages...

Jun 16, 2011 | Polaroid Televison & Video

1 Answer

Bromen screen, and not starting


Hello,

This type of fault is a power problem, you have to open the back cover of the television, to check for the faulty component, the power supply board is dead which can be dead at anytime,do you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.


I hope this will help in solving the problem and do take caution in handling the television, because it contains high voltages....

May 15, 2011 | Samsung 50 in. Plasma TV

1 Answer

Power went out and now TV won't turn on


Good day,

This is a type of fault that is associated with the power board, you have to open the back cover and check for blown fuses, if found replace with the same rating,because this is the common cause of the type of fault, if otherwise the power supply board is dead, you know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

I hope this will help to solve the problem and do take caution in handling the television because there is high voltages in the power panel board of the television....

May 13, 2011 | Sony KDL32EX600 32 in TV

1 Answer

T.v. wont turn on makes a buzzing sound 4 a second and does nothing...


The power supply board is dead.Tv is not taking high voltage anymore,have dead transformers.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Oct 20, 2010 | iLO 3200 32 in. LCD Television

2 Answers

Tv no power ,dead


D10 is shorted. HER304 in middle of Power supply board near large electrolytic cap. Replace with Radio Shack 276-1144 3A 400PIV Diode. PLEASE BE CAREFUL WITH HIGH VOLTAGE PRESENT ON POWER SUPPLY BOARD. UNPLUG POWER CORD!!! OBSERVE PROPER POLARITY WHEN REPLACING DIODE-LOOK WHERE THE BAND IS.

PS- I fixed this model this morning.

Aug 12, 2009 | Memorex MLTD2622 26 in. LCD TV

Not finding what you are looking for?
TruTech PLV16190 Television Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Televison & Video Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a TruTech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...