When i power on emachine t6410... pc attempts to power up but stops after a 1/2 second and only the power button blinks continuosly... what gives?

Kindly perform the below steps:
- Remove the battery and Power adapter
- Press and hold the power button for 30-45 seconds (with battery and power still removed)
- Insert just the battery and attempt to boot the laptop.

After the laptop booted go to the eMachine/Gateway Support site and download the webcam driver and software.

http://www.driverscape.com/manufacturers/emachines/laptops-desktops/emachines-e727/3265

forrmat your OS then run it.

A hard reset means that you press the reset button that is next to the power button on the computer case, as opposed to a software reboot, start > restart.

You may contact Live-Tech 1-888-361-8511 they can assist with the order of the parts and installation. If needed a tech can be sent out to do the repair for you once you get the needed parts. Please explain your problem in more detail it is not common to have such an issue.

The motherboard in your computer is an MSI MS-7145, which is also called RS480M. You can download a copy of the manual here. The front panel connections are on page 2-20.

Looking at the header JFP1, pins 1 through 9 (odd numbers) are the front row, pins 2 through 10 are the back. Pin 10 is the missing pin. The power switch connects to pins 6 and 8. The power LED connects to pins 2 and 4. The HDD LED connects to pins 1 and 3. The reset button, if used, connects to pins 5 and 7.

Download and install the audio drivers from this eMachine link:
http://www.e4me.com/support/product_support.html?cat=Desktops&subcat=T%20Series&model=T6410


Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Which program do you have booting on start up. Do have Nortons, or any other AntiVirus, Firewall or Spyware softare installed> when did this problem start? Did you make any changes to your hardware...uninstall any important .dll files?

ok " here is what i would do , un plug the power to hardware one by one, and restart computer, after each unplug

think youll find the one thats causeing the problem

Download [email protected] .........T.

Have you tried a BIOS firmware upgrade?