Question about Uniden Phones

1 Answer

Bought phone EX18560 Series yesterday. floolowed instructions to charge. Today I came home from work, plugged in telephone jack. phone will not turn on. Attempted to re-register (4X's). Led flashes. Still no dial tone. Checked battery and all connectins. Still no dial tone. When I place the hanset in receiver, the charge/in use led light remians constant and not flashing.

Posted by on

1 Answer

I have two older (2002) model cordless Uniden phones that require the handsets to return to their original factory bases. If they have rested on another Uniden base, even of the same model, there is no dialup tone. Replace to the original base and you should be back in service.

Posted on Aug 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phone ring tone in house cannot hear it do not know house to fix as instructions are in greek


must be sure handset ringer volume is NOT set TO off
2) THE Telephone line cord and power adapter are plugged in properly.
3)the handset may be too far from the telephone base. Move it close to the telephone base.
4) many extension phone on the telephone line to allow all of them to ring simultaneously.
5) if other telephones in your home are having the same problem , the problem will e in service provider
6) other electronic products such as HAM radio detect the phones cause interferences.
7)test a working phone at the wall jack.
8)remove and install the battery again and place the handset in the telephone base
9) wait for the handset to synchronize.
God bless you

Sep 27, 2012 | Phones

1 Answer

AT&T Design Line Telephone 146 - static on line


Check the cord from the phone to the handset - wiggle both ends to see if you get more noise. Could be a bad connection or bad cord.

Jan 23, 2012 | AT&T 146 Corded Design Line Telephone

1 Answer

My office phone rings and all the lights on the phone works.all the other phones in the office works.but, i have no dial tone or cannot hear anything on my handset or the speakerphone


A 77xx series phone is a Proprietary Analong telephone. It requires 4 wires to operate, the inner pair (your standard tip and ring) carries the voice and the outer pair carries the data. Guess which pair has a problem :-)

If you start with a regular telephone and plug it into the jack, you'll get dial tone. Work your way back until the regular phone works. Once it does, the 77xx phone will work. Also, to double check, take the system phone and plug it directly into the jack at the system cabinet. It should work or you have a defective base cord or phone.

Carl

Apr 15, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

I bought several used mitel superset 4025 phones. When I try to plug them in (we have two phone lines in one jack), the display flashes "waiting for sync" and the lights on the phone flash (in succession...


the Superset 4025 is a digital set that is intended to work with a Mitel telephone system. The port must be programmed and connected to a jack to allow the phone to work. The phone is not intended to be used as a home telephone.

Aug 18, 2010 | Mitel Superset 4025 Corded Phone...

1 Answer

Getting the M7208 to work


Nortel M7000 series are proprietary sets which require a nortel MICS, CICS, or an older 8x24, 6x16, or 3x08 in order to work. If you have the system, it maybe that the jack isn't activated with a system port.

Nov 24, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

We have no phone service at our home, since disconnecting and then reconnecting comcast box. We have a new computer and was instructed to disconnect modem and power cord for ten seconds to allow...


there should be a standard telephone cord that went from one of your telephone jacks to the comcast modem. that cord should be plugged in to the phone jack marked 1 on the back of the modem.

Sep 23, 2009 | Phones

1 Answer

Just bought phone no dial tone i move the setting to pulse


First thing to try is another phone in the wall jack if it doesn't work either you need to call your phone company. If the other phone works, make sure that the telephone is getting power from the AC electrical outlet. Try swapping the telephone cord with another cord. and lastly, unplug the battery from teh handset and plug it back in untill you feel it click into place. Sometimes the new battery connections are pretty tight and may not really be connected even though it looks like it is plugged all the way in.

Mar 23, 2009 | Uniden 5.8GHz Dual Cordless Phone

4 Answers

Home telephone wiring


Your wiring could be a mess of splicing, jumpers, additions over the years. It's impossible to know (or to really be able to help you) without being there in person.

Typically, you just have to worry about the red and green wires. The black and yellow are for a second line. This is of course only if you have standard 2 pair wiring.

If any work has been done recently I would concentrate on that area. If just one jack is removed or a wire cut by mistake that could easily take out your entire house. Also, if the red and green wires are touching anywhere that would also cause a problem.

Feb 24, 2008 | Phones

1 Answer

Do I need a network?


If that model phone has a rj14 jack ( standard phone jack) and when you plug it into a known good wall jack and you can draw dial tone then it will work. If not it requires a KSU to interface with the lines and that's a lot more equipment than you need for 1 or 2 lines. Thank you. Jer

Feb 17, 2008 | Aastra Telecom Aastra MDC Centrex...

1 Answer

"searching" message even when handset on the base


Found the following in AT&Ts FAQs for your phone, I'll leave only what might be relevant: # Charge the handset for 12 hours. After the first charge, the battery will quick charge in only 8 hours. Re-cradle the handset nightly for recharging. The battery will not overcharge. # Connect telephone line from base to unit to modular telephone jack. If cord is already plugged in, unplug and reconnect at both ends. Also, you may want to try another cord from a working telephone. See the owner's manual under "Connecting to Phone Line." (you can get the manual here on the product page in case you lost it) # Try a working phone at the jack. If another phone has the same problem in that jack, the phone jack is defective. Good luck, hope you work it out

Jun 03, 2006 | AT&T 2256 Cordless Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96683 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...